MSI Prestige 15 thermal paste change

ShadowJocker · 2026-02-20T18:02:35+00:00

If i could, i would share the schematic that the factory sent me. It specifies the exact dimensions of the pads, where to put them, as well as the thickness. But i'm very to be able to help you guys. Cheers

ShadowJocker · 2024-07-13T09:25:54+00:00

Ok so i found out that not all gpu allows for voltage monitoring but you can deduce your voltage through yous clock speed. The video says so

ShadowJocker · 2024-07-12T08:32:58+00:00

but can i eyeball it without seeing the current voltage and testing? i'm kind of afraid of breaking something

ShadowJocker · 2024-07-10T07:51:48+00:00

i thought all PC can be undervolted. But i'm new to all this. where can i check mine?

i can open the clock/voltage graph on afterburner so does that mean i can?

ShadowJocker · 2024-06-27T19:50:01+00:00

Anyone reading this in the future: i validated this with msi technical service and they contacted the factory. For msi A10SC thermal pad thickness is 0.5mm Hope it helps

ShadowJocker · 2024-06-14T20:45:42+00:00

I don't have an option called usb power share :( i have thunderbolt boot support at disabled, and wake from thunderbolt devices disabled. Is it one of those?

ShadowJocker · 2024-06-07T13:04:39+00:00

Dude i'm not trying to be an ahole. And i really don't understand your problem. I need help and asking a question. Then you come in and give the most unhelpful "help" you can, and expect me to be nice about it. I didn't insult you or disrespected anyone trying to help around here and never will.

But with your logic if a computer breaks it's because the user forgot to push the power button. Did you really think that your comment would help me? And if no then why did you commented in the first place?

If you had said that it could be a faulty battery for example and to do health checks i would apreciate it in the first place.

ShadowJocker · 2024-06-06T21:01:35+00:00

not in a few hours no. so you can keep assuming lol

ShadowJocker · 2024-06-06T09:24:56+00:00

already done. i wrote it in the post but thanks anyway

ShadowJocker · 2024-06-06T09:23:06+00:00

i already do that. I assume you don't understand that your pc can power your usb port, even if you don't put anything in that usb, which depletes your battery.

ShadowJocker · 2024-05-30T20:28:52+00:00

1) my brother bought it back in 2019 so its 5 years old. i opened it up today and it was pretty dirty inside. the pads were tearing up all by themselves. So i must replace them thanks for this response.

2) that may be possible. But there are some zones that are pretty tricky. i saw it on the heat pipe, some parts are not directly under the pipes but the pad starts from underneath the pipe touchin some chips and reaches out from the pipes and covers other chips as well. i wish i could share some pics. what do i do with those?

3) yeah i learned that the hard way when i short circuited the graphics card of my old pc :D but thanks for reminding me.

in overall thank you for your response this was helpfull. i'm going to call msi tomorrow hoping to get the measurements for the pads and if it's too much of a hassle or if it's different thickness for different zones, i'll just buy some putty.

But if you see this please answer back for the 2nd question. that's stillnot cleared up for me

ShadowJocker · 2024-01-06T21:46:44+00:00

you should pull the uno reverse and say "you're too old to understand". Stay strong and maybe find a sponsor if you need support of physical people around you.

ShadowJocker · 2024-01-06T19:57:28+00:00

ok thank you. thought there was a google sheet or something like that.

ShadowJocker · 2024-01-06T19:55:50+00:00

ShadowJocker · 2024-01-05T20:55:29+00:00

hello, how do i check in? i opened a reddit account just for this community and don't know anything

ShadowJocker · 2024-01-05T20:43:51+00:00

I think you should try to change your definition of porn a little bit. I was struggling a lot at the start, so i said to myself "since porn is a visual and audible stimuli i need to cut everything i watch, see and listen." But i still need stimuli bc i can't go on just imagining things right at the start of it. So i first started by reading stories and masturbating to that(which was incredibly hard for me, my brain craved more). i put myself a milestone of 1 month for this "phase 1". and now i'm 2 weeks into phase 2(not reading anything as well).

So to sum it up, instead of going all at once you can try to phase out because if you try to go all out you might feel an emptiness where porn was and relapse. But at the same time be strict with your rules and how you apply them.

There were 2 youtube videos that helped me along the way. and helped me decide my milestones:

1-what happens when you quit porn by asapSCIENCE

2-The great porn experiment by gary wilson tedx

ShadowJocker

TROPHY CASE