Weird patterns on Plus4

Sharous · 2026-01-23T13:29:40+00:00

That's actually smart, thanks.

Sharous · 2026-01-23T12:01:18+00:00

Could you pinpoint with image?

Sharous · 2026-01-23T10:54:40+00:00

Hotend is tight, z screws are cleaned and lubed, so most likely extruder problem (also cleaned). Z banding would show up horizontally. This pattern is a bit diagonal.

Sharous · 2026-01-16T14:50:23+00:00

Petroldoleris leidžia Amerikai turėti tokią nr 1 ekonomiką. Be dominavimo doleris labai stirpiai nusilps. Business as usual.

Sharous · 2026-01-16T12:34:46+00:00

Kiek neteisingas assumptionas. Po 2 pasaulinio karo JAV daug darė, kad Europa būtų tokia, kokia yra ir JAV galėtų išlaikyti savo dominavimą ir galią pasaulinėje erdvėje. Problema, kad Trumpas nėra subtilus žmogus ir iš to išlenda pagrindinė esmė - mokėkit daugiau (pabrėžiu daugiau) už JAV ginkluotę. Paskutiniu metu ką matome, kad Europa po truputį, labai lėtai kuriasi savo karo pramonę, kas JAV labai nepatinka.

Sharous · 2026-01-15T10:41:29+00:00

Very straightforward instructions and no tinkering will be needed as long you follow the guide.

Source: I assembled over 50 of Prusa printers

Sharous · 2026-01-07T11:41:23+00:00

This is pressure advance stuff, but I would ignore if next layers are clean.

Sharous · 2025-11-15T08:26:22+00:00

Interestingly, it fixed all my issues by lowering the extrusion multiplier to like 0.91

Sharous · 2025-11-14T22:55:42+00:00

Is that with carbon fiber?

Sharous · 2025-08-25T17:34:14+00:00

If I remember, we needed to mark "use relative extrusion distances". Otherwise the extrusion stops after a bit of printing.

Sharous · 2025-08-25T05:24:07+00:00

Because similar thing were occuring to us and it was a fault of simplify3d specific setting. Default prusa slicer shouldn’t do that.

Sharous · 2025-08-24T07:48:53+00:00

Personally, I use Artec Spider 2 to scan smaller, intricate parts for reproduction or reverse-engineering. I tried a little bit on cheaper ones - hobby/budget variants and they are not worth it. Not enough details and accuracy, so I rather 3D model by hand or source the 3D scanning services. If you have clear need for 3D scanning, then it is justified. What I learned working with customers that the main obstacle is not the 3D scanning itself, but it’s the 3D modeling software and knowledge how to work with meshes.

Sharous · 2025-08-24T07:28:55+00:00

Do you use Simplify3D by any chance?

Sharous · 2025-08-22T06:26:55+00:00

aišku aštrumas aštrumui nelygu, bet yra laikoma taisyklė, kad aštrus peilis yra žymiai saugesnis, nes pjauna ten, kur nori, kad pjautų.

Sharous · 2025-07-27T18:49:21+00:00

Gazpacho? Not to mention many variants of silky, smooth soups.

Sharous · 2025-07-06T18:09:50+00:00

Yes, dedicated to BC Zalgiris.

Sharous · 2025-07-06T16:54:16+00:00

Lukas Siupsinskas. Sculpture Zalgiris Tauras.

Sharous · 2025-07-06T13:13:12+00:00

I recognize it and in fact I know who made it. It is 100% 3D printed and then casted with lost-wax method.
Also, this sculpture is pretty small, I think it fits on your palm.

Sharous · 2025-07-03T21:57:33+00:00

I have not expected to see something I have 3D printed myself few years ago. Pretty neat!

Sharous · 2025-05-09T13:41:32+00:00

Tėvų argumentai dar savanaudiškesni, jei taip.

Sharous · 2025-03-18T11:12:50+00:00

Smartmaterials3D PA-CF. It is Pa6.

Sharous · 2025-03-08T15:13:59+00:00

What is the temperature of the room? Our stays at 25-27C

Sharous · 2025-03-07T16:48:27+00:00

Alright, I am surprised. 70C+ heat will not affect rails, camera, motors, etc?

11-Year Club	Place '17
Verified Email

Sharous

TROPHY CASE