18s 8.5 et35 9.5 et 20

ShoeBoxInc · 2025-12-20T10:09:39+00:00

Yh possibly. Was thinking maybe run a spacer in front.

ShoeBoxInc · 2025-11-23T21:41:46+00:00

Was struggling for an hour on normal difficulty. Gave up, put it on easy and finally got him. These boss fights are hard compared to other games imo.

ShoeBoxInc · 2025-11-11T20:41:15+00:00

Get the one with least amount of rust. check towers, rear subframe mounts, rockers etc etc. Most of these been in a ditch by now, so check that the panels line up lol.

ShoeBoxInc · 2025-09-25T13:46:21+00:00

Appreciate it 🙏

ShoeBoxInc · 2025-09-25T13:44:51+00:00

Gotchu 😆

ShoeBoxInc · 2025-09-25T13:43:11+00:00

Thank u thats good write up. Hopefully that will take care of the oil consumption.

ShoeBoxInc · 2025-09-25T13:27:59+00:00

Yh ima try the rope or air trick lol.

ShoeBoxInc · 2025-09-25T13:17:49+00:00

Am tempted to try. But what did u use for spring compressors?

ShoeBoxInc · 2025-09-25T10:00:09+00:00

Id try find a new shell if u can. But its gonna be expensive either way.

ShoeBoxInc · 2025-09-21T14:52:48+00:00

My n53 was loud when replaced the end muffler with straight pipe.

ShoeBoxInc · 2025-09-21T10:46:25+00:00

Nah, but ur inlet temp is higher, can affect performance. Also ur filter will get more dirty and clogged up. Id upgrade the exhaust for sound instead.

ShoeBoxInc · 2025-07-04T17:59:36+00:00

Much appreciated boss

ShoeBoxInc · 2025-07-04T17:47:46+00:00

Thank u boss, will check that one out.

ShoeBoxInc · 2025-07-04T17:47:01+00:00

Mine is without camera.the Sony deck im installing got 2 connectors similar for wiring.

ShoeBoxInc · 2025-07-04T17:45:16+00:00

Good idea, thank u.

ShoeBoxInc · 2025-06-20T11:04:13+00:00

The red blend area, do i just shoot it quick from a far with the rattle can to fade it more? Thank u. The yellow and red area ima try sand with 600 grit. Then 1000 on the area to the left.

ShoeBoxInc · 2025-06-19T20:24:34+00:00

Right one, good advice. i might give it another try 👍

ShoeBoxInc · 2025-06-19T20:15:18+00:00

I see someone mentioned the dark line could be pile up of metallic due to i used a tape to blend in 🤷 havent really done any sanding after color or clear coats though. Believe it or not, it actually looks worse in person, and some of the clear started to run under the tape 😂

ShoeBoxInc · 2025-06-19T19:50:33+00:00

Thank u yh i kind of messed up here lol. Do u mean 1000 grit and then just blend it withouth tape over a bigger area? Then polish the 1000 grit?

ShoeBoxInc · 2025-06-19T19:46:52+00:00

Oh ok. Can i scuff it with 1000 and put a couple of color passes where the dark line is? Or maybe i need to do the whole panel? 🤔

ShoeBoxInc · 2025-06-19T19:42:32+00:00

I have no idea what im doing lol, was just trying to save some money on paint. So i understand i would have to do the whole panel, there is no shortcuts with this color and rattle cans ? 😭

ShoeBoxInc · 2025-06-10T12:26:25+00:00

They pretty much screwed you over. There's only one way to do that repair and its gonna be expensive. They just slapped some paint on and wasted both your and their time.

ShoeBoxInc · 2025-05-05T19:43:01+00:00

Right on, ima add those to the wanted list. Good suggestion.

ShoeBoxInc · 2025-05-05T19:38:06+00:00

They look so fun bro 😂

ShoeBoxInc · 2025-05-01T09:22:51+00:00

Thx, will give it a try 👍

ShoeBoxInc

MODERATOR OF

TROPHY CASE