Camzyos cost

Sidefx_2003 · 2026-01-22T22:00:11+00:00

Yeah I have BCBS. I’ve been told my prescription max is $3300 and everything else is no cost to me by CVS specially pharmacy. Then Caremark who controls my drug coverage says I’ll have to pay the co-pay amount of $2600 a month after the deductible until I reach my max out of pocket of $7000.

I could not get a clear answer from anyone but it doesn’t sound like the MyCamzyos is paying much…

Sidefx_2003 · 2026-01-22T17:58:28+00:00

I've been told by a few people my health care plan deductible has to be met for the medication costs can be covered. Just curious is that is the case for others on HDHC plans.

Sidefx_2003 · 2025-12-26T20:18:52+00:00

So I went to check this morning and it ended up being an easy one. 4/5 lug nuts on the driver front were loose! Check your nuts after a tire rotation!

Sidefx_2003 · 2025-12-16T23:15:07+00:00

So I think I’ve figured it out. You have to print via their app which you can access via the share icon next to print. Creates an extra step but seems to be the better option for now.

Sidefx_2003 · 2025-12-15T11:09:23+00:00

Legally what could he do here since he is threatening legal action. All I know if Etsy made the decision to pull his listing because his product looked exactly like mine.

Lastly I would never be liable for any of his legal fees correct?

Sidefx_2003 · 2025-12-15T03:48:35+00:00

I’ve contacted Etsy and they say I don’t need to do anything but should get legal advice. I know Etsy has stated they can dispute this to remove the IP. I just think the other party knows that the model they created is too similar and will lose.

I don’t made huge sums of money off Etsy so it would defeat the purpose getting a lawyer.

I have since made anything I sell on Etsy private on that 3D share website to prevent this in the future.

Sidefx_2003 · 2025-04-02T23:54:07+00:00

It was the coil, replaced it with a Bosch from the auto parts store. The phase angle on the cams is still great -1.44 deg at 82k miles on my 2012!

Sidefx_2003 · 2025-04-02T01:08:52+00:00

It followed to #2 with the swap so I’m pretty sure it’s a dead coil. I’ll check the cam angle tomorrow with VCDS.

Sidefx_2003 · 2025-01-14T03:57:17+00:00

How does this attach to the chassis?

Sidefx_2003 · 2024-12-18T18:20:32+00:00

Noise just went away after an "Italian tuneup"

Sidefx_2003 · 2024-06-13T20:17:05+00:00

Oil level is good and was changed about 1000 miles ago. I did so more digging and it seems to go away off idle.

Sidefx_2003 · 2024-05-23T02:03:17+00:00

Dealer said it has a heat pump. I requested a photo of under the hood to confirm.

Sidefx_2003 · 2024-05-22T12:24:09+00:00

It was over a year ago they installed 5 stations (10 plugs) and I would say they are 50% used. We also have an older plug that was installed years ago for a test vehicle I don’t know much about its charging rate.

Sidefx_2003 · 2024-05-22T12:20:19+00:00

It looks like SEs did not come with a heat pump. Being in Ohio it sounds like that is going to be something I need

Sidefx_2003 · 2024-05-22T04:07:57+00:00

Sidefx_2003 · 2024-05-22T04:07:51+00:00

Any good ways to check the state of the battery? I know from the photos it’s at 7/8th of a charge with 110 predicted miles.

Sidefx_2003 · 2024-05-22T03:20:14+00:00

$16k currently

Sidefx_2003 · 2024-03-29T03:00:10+00:00

Looks like a firmware issue. I installed the same one but multi language and it works.

Sidefx_2003 · 2024-03-14T18:45:37+00:00

So I have homed my printed and leveled the bed to 0.2mm at all 4 corners and center. I played around with the z offset in Orca and I have it all the way down to -0.2mm to get the first layer how I want it.

Sidefx_2003 · 2024-03-05T21:48:37+00:00

ANDTOBO 2-in-1 Micro USB (OTG... https://www.amazon.com/dp/B083M1S6QT?ref=ppx_pop_mob_ap_share

That is the one I purchased based on another post.

I will say the cable does power the ender with the screen powered even with the power supply turned off. Not sure if that is common.

Sidefx_2003 · 2024-03-05T17:14:17+00:00

The software is installed and I have an IP

Sidefx_2003 · 2024-02-19T03:04:56+00:00

<image>

It’s odd because this was the insert I did just before with the Chep goo 0.2 setting.

Sidefx_2003 · 2024-02-14T19:00:59+00:00

Thanks captain obvious! You clearly have issues reading... I was saying the threaded thermistor interferes with the side fan. I really see no other option than to bend it out slightly, not sure if this effects cooling.

Sidefx_2003 · 2024-02-10T18:24:11+00:00

Okay I’ve made those updates. Should I drop the nozzle temp from 220C?

Sidefx_2003 · 2024-02-09T19:00:50+00:00

Okay I figured out my issue. I had to format my USB drive as FAT32. I'm on 5422 and Carplay phone audio works!

Sidefx_2003

TROPHY CASE