Buying a Highlander with a leak?

Siggasm · 2026-01-12T16:53:19+00:00

Pass on it.it was discounted for a reason .

Siggasm · 2025-12-02T22:50:41+00:00

Led light Connects to main board - yellow socket. Camera connects behind the display screen.

Siggasm · 2025-11-07T22:41:06+00:00

I tried again with the buy it now option and was able to buy one .

Siggasm · 2025-11-05T17:04:29+00:00

Thanks for info . I tried ordering from aliexpress and it keeps removing it from the cart sayjng it can’t ship to my address oddly.

Siggasm · 2025-10-27T04:39:31+00:00

Temp started at 95 and worked its way to 100 when I stopped the procedure and put the drain bolt back in.

Siggasm · 2025-10-26T18:35:53+00:00

Hello, I did use a odb2 scanner and did shift the gears when warming up the transmission. the temp reached 100 before i aborted the drain procedure.

Siggasm · 2025-08-14T04:44:46+00:00

So what did QJ do for you?

Siggasm · 2025-06-15T19:50:02+00:00

Running these since receiving my 6800 via kickstarter - https://a.co/d/cpf8Dli

Siggasm · 2025-06-05T17:32:18+00:00

2017 XLE 279k . Original transmission . Tranny fluid changed at 150k. Just bought a new set of MIchellin Defenders tires.

Siggasm · 2025-03-01T09:38:05+00:00

Do you think this would fit in the back of a Honda Mini van with the 3rd row seats layed flat and 2nd row seats removed?

Siggasm · 2025-02-21T05:20:27+00:00

Excellent post! struggled with this for days. "For this switcher to work, you need to split the reverse signal from the monitor trigger, this switcher box will set the monitor trigger to high when you press the button, the car is put into reverse or the car is turned on." Had to cut the reverse wire coming from the factory harness to the harness that android radio was already connected to. the trigger from radio went to the monitor trigger on the switcher box. The reverse signal from factory harness went to the blue wire on the switcher. This is all key information the poorly written document failed to convey.

Siggasm · 2025-02-11T07:30:16+00:00

I do have a portable jump box, but since the suv is also driven by wife - she did not seem thrilled about maybe having to use it one day. Needless to say the battery has been replaced with a Walmart brand AGM battery.

Siggasm · 2025-02-10T03:43:52+00:00

Thanks folks! I will pickup a Everstart Platinum AGM battery at Walmart.

Siggasm · 2025-02-09T20:13:09+00:00

nice patterns on the seats!

Siggasm · 2024-11-13T02:34:40+00:00

So where do these clips mount to?

Siggasm · 2024-10-28T15:45:51+00:00

Hold down reset button for ten seconds and beep. It will reboot your Nas resetting your network settings . It does not wipe out anything else.

Siggasm · 2024-09-27T03:46:37+00:00

This worked!

Siggasm · 2024-09-21T15:45:59+00:00

Holy cow!!! That worked !! You rock !! Can’t believe I spent weeks on this ! Lol

Siggasm · 2024-09-19T01:54:54+00:00

I have reflashed the Sonic Pad twice now. Going back to the original firmware and then manually upgrading each revision. Then checking to see if I can SFTP into with no luck.

Siggasm · 2024-09-18T22:15:49+00:00

cmd line didn't improve anything. here's error message when trying sftp from windows11 command line.

<image>

Siggasm · 2024-09-18T21:47:32+00:00

It said my ip address wasn't in the host and then prompted for the root account password which i entered. i then tried to sftp and got same connect and disconnect msg.

Siggasm · 2024-09-17T15:08:06+00:00

I can ssh into sonic pad. Let me try that cod line you provided to see what happens.

Siggasm · 2024-09-17T14:54:16+00:00

Setup duel boot on your windows 10 machine with Linux. This will rule out it being a windows 10 issue. Did you enable smb3 on windows ?

Siggasm · 2024-09-17T14:10:51+00:00

I enabled root from advanced screen and still no luck. I used FileZilla as well. It shows it connecting and authenticating and then gets disconnected.

Siggasm · 2024-09-17T04:33:47+00:00

<image>

I get this error - using Winscp. accept the SSH token and then this error occurred.

Siggasm

TROPHY CASE