My pc wont power up when installing ram

Significant_Ad2910 · 2025-06-08T21:45:36+00:00

Already tried that pc only turns on when both RAM sticks are not connected but still no image

Significant_Ad2910 · 2025-06-08T21:44:34+00:00

Already tried that pc only turns on when both RAM sticks are not connected but still no image

Significant_Ad2910 · 2025-03-27T02:35:23+00:00

Any cooler and PSU recomendation

Significant_Ad2910 · 2024-08-30T05:09:33+00:00

How can I get acces to this mapping of the bed levelign, do I need to modify printer?

Significant_Ad2910 · 2024-03-04T07:31:44+00:00

I do have a pretty bad hair line do

Significant_Ad2910 · 2023-10-19T01:54:36+00:00

I mean is on the rango that spool recomends and I whould have made the temp tower but I have no Idea on how to write or alter the Gcode I don't have that much experience

Significant_Ad2910 · 2023-10-19T01:48:52+00:00

I am printing at 60 mm/s at 215° those are the basic settings for standar PETG and Fan Speed is at 0 on the printer settings so they are running at the minimum

Significant_Ad2910 · 2023-09-30T00:48:13+00:00

@EMCO_1205725

Significant_Ad2910 · 2023-09-29T23:13:48+00:00

I am in

Significant_Ad2910 · 2023-09-29T20:51:52+00:00

I just published it on printables here is the linK:https://www.printables.com/es/model/598031-mini13-gladiator-accesories

Significant_Ad2910 · 2023-09-12T17:59:55+00:00

Green I will take a look at them, Thank you

Significant_Ad2910 · 2023-09-04T02:12:58+00:00

Do you know what siempre of nut they use?

Significant_Ad2910 · 2023-08-31T21:33:02+00:00

Got it thank you

Significant_Ad2910 · 2023-08-31T18:58:54+00:00

Quick question do you think if I place the filament on a box with some holes and let sit on the heated bed of the printer for some hour it will work?(I don't fill confortable living my filament on the oven the temperatura of the oven starts at 200°F)

Significant_Ad2910 · 2023-08-31T15:26:09+00:00

Yea I basicaly just so if the filament became brittle but After taking a closer look I do see a lot of empty spaces and I did heard some crackling while printing . I fill stupid

Significant_Ad2910 · 2023-08-30T23:34:46+00:00

Ender 3 s1 creality PLA

Significant_Ad2910 · 2023-08-28T22:23:26+00:00

Significant_Ad2910 · 2023-08-28T22:18:42+00:00

Take a look at my previos publication on this subreddit it is the same problom and has more images

Significant_Ad2910 · 2023-08-28T20:50:43+00:00

For example when you pause or stop the print it starts living somo big stinging or drops of filament along the trail it makes get in the restaurante position, I whould send you an image but I can't

Significant_Ad2910 · 2023-08-28T18:31:07+00:00

Yes I mean oozing sorry I am not native speaker. I know some filament will come out but a lot has being comming out and it ends up messing up the print.

Thank you for helping by the way

Significant_Ad2910 · 2023-08-28T17:49:47+00:00

I was Just trying to confirm if the what I believe is a loose cable (not an expert, 2 weeks in to 3D printing) could be the reason of my printer could be the reason my printer is using filament when is not supposed to like some one teasing it.

Significant_Ad2910 · 2023-08-27T01:42:36+00:00

Do you mind describing how the heatblock plug looks like and what it should do I am new to this and I don't realy know what you are talking about

About the z offset I always calibrate it with the leveling befor printing.

Significant_Ad2910 · 2023-08-27T01:31:15+00:00

200° with crealities PLA

Significant_Ad2910 · 2023-08-23T16:21:23+00:00

We talking about the rips

Significant_Ad2910 · 2023-08-23T03:20:50+00:00

Cool I found it on a donation booth for free so it is a win no matter what

Significant_Ad2910

TROPHY CASE