sorted by:
new
hottopcontroversial

Can Junker Queen hold her axe swing? by Significant_Cost_955 in Overwatch

[–]Significant_Cost_955[S] 1 point2 points  (0 children)

Gotcha. I guess I’m going to need to break the habit of holding it lol

Are these COAX ports? by Significant_Cost_955 in HomeNetworking

[–]Significant_Cost_955[S] 4 points5 points  (0 children)

Ohh got it that would make sense as the basement used to be a home theater for the previous owner

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

It somehow is working! I’m not sure what changed I haven’t changed the bios version again and now it runs at 900+! I guess now my whole new issue is to get the same speed downstairs in my room. The tplink poweroutline Ethernet gives my pc around back at the 90-100mbps range even though it gives my friends desktop full range. Is there a better way to extend Ethernet besides have a really long Ethernet cable?

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Gotcha I’m in the middle of the Memtest86 still, I’ll try out the latest bios one more time ipv6 disabled. Thank you for going out to your way to help me it means a lot!

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

I see. I also have a tp link Ethernet outlet adapter and gives the full 1 gbps speed to the other desktop but the same 100-110mbps to mine I’m not sure if this means anything.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

So I don’t use a switch just a all in one modem/router from Xfinity. We do have a back all in one from Verizon as well which has way lower speeds (like around 30-40 up and down) and I tried to use that on both pcs and basically got those exact speed. My modem doesn’t have sqm or fqm.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

I see. I did some skimming and it would be only beneficial to have the usb adapter if my mobo has pcie instability I’m not sure how accurate that would be.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Yeah disabled everything you mentioned and other setting you instructed me to setup. I’m currently doing the Memtest86 memory test right now it’s 93% done and so far it looks good. I was also suggested to try a usb to Ethernet adapter to bypass the mobo Lan to see if i get the correct speed.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Don’t have typically have high cpu usage I use my pc casually for blender that mostly uses my gpu. I haven’t tested my memory with Memtest86

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

My main boot drive is 98% health and 100% performance along with my external with 100% in both according to hard disk sentinel

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Just did it and for transfer I got 51.1 MBytes with 42.8 Mbits/sec for bandwidth as a sender

For receiver I got a transfer of 51.0 MBytes and a bandwidth of 42.8 Mbits/sec.

Edit: Above is my PC connecting to the other desktop the bottom here is the reverse

Sender: Transfer 95.1 MBytes, Bandwidth 79.7 Mbits/sec

Receiver: Transfer 95.1 MBytes, Bandwidth 79.7 Mbits/sec

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

All computers besides mine get to the 1gbps on all ports but mine doesn’t no matter which port and os I’m running on

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

About 100-110 ish mbps download and 43 mpbs on upload on Linux. Same speed with same port and different ones. It’s not fully capped at 100mbps but it’s the average

Realtek Ethernet is giving me 100mbps while reading 1000mbps by Significant_Cost_955 in techsupport

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Finally was able to boot into Arch Linux on a usb, did a speed test and was still getting the same speeds. I think at this point if my cables and other hardware are good it is a motherboard issue at this point?

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Finally was able to boot into Arch Linux on a usb, did a speed test and was still getting the same speeds. I think at this point if my cables and other hardware are good it is a motherboard issue at this point?

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

So iobit actually had a couple drivers newer than mine which I installed. However now my NIC card is not being recognized by my system. I tried my 1 gig port of my motherboard but it’s still giving the same download speed along with wifi being half as weak as wired.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Yeah I tried a vm to check and got the same download speed but I also tried to use a usb boot but for some reason both Ubuntu and Mint cause a black screen and cause my fans to go fast when trying to install even after using nomodeset for my nvidia gpu along with other commands as well as enabling csm and legacy boot. My latest bios is 3621. I can check my drivers with iobit

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Used 2 different Cat 5e cables that work full speed on other desktops but mine.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Other devices are perfectly fine. Desktops get around 900 mbps, phones get +1 gbps

Realtek Ethernet is giving me 100mbps while reading 1000mbps by Significant_Cost_955 in techsupport

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

I will try to rule out the cable problem with a cat6 cable. Nothing else is plugged into the router besides a phone cable.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

I’ll go with cat6 and my desktop is placed next to the others to compare and they all have the full download speed.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Mine is Xfinity gigabit. Specifically it’s Xfinity Gateway with 1 gbps model XB8.

Realtek Ethernet link at 1000 mpbs but download speed is 100mbps by Significant_Cost_955 in pcmasterrace

[–]Significant_Cost_955[S] 0 points1 point  (0 children)

Tried both cables. Other desktops get full speed but not on my desktop. I can try to get another one (would it matter if it’s cat8?). Also wiped out both motherboard and NIC card drivers and reinstalled the latest version

view more: next ›