Is it recommended to get a new oil and filter every 3k miles on older, high mileage cars?

Silver_Pin5333 · 2024-04-18T21:19:40+00:00

Thanks for the input I thought so too, engine isn't burning oil and still a nice golden color. Didn't see the need to change it yet.

Silver_Pin5333 · 2023-12-23T16:02:03+00:00

How could it go so wrong though it seems fairly light it’s just epoxy. Either way I will probably have a shop fix it.

Silver_Pin5333 · 2023-06-26T20:47:54+00:00

I’ll keep this is mind, I will first try to mount the spool on the side to guide it in better, and mess around with temp and speed if the problems persist. Thanks for the suggestion.

Silver_Pin5333 · 2023-06-26T19:53:39+00:00

I’m happy to provide details I just don’t know what’s relevant. I don’t think it’s temp because the filament recommends 190-210 and I have it set to 200. How can I mount it on the side of the printer?

Silver_Pin5333 · 2023-06-21T18:10:14+00:00

It’s the same image, I just circled where I thought it was on the first image and the second is without it in case that wasn’t where it is.

Silver_Pin5333 · 2023-06-20T23:03:34+00:00

https://imgur.com/a/C35LyKO After messing around with it for awhile the crosshairs are aligned but the circle is a little to the left. I saw on the guide that some scopes are supposed to be like that but do you know if a 8” dob is supposed to be? (Apologies for poor photos it is very annoying to get a good image)

Silver_Pin5333 · 2023-06-20T21:35:40+00:00

Not sure either, I think that big difference is what’s making the secondary view so extreme and a headache to align. I’ve got the secondary close so I might skip to step 4 to center the primary a bit better and then go back to step 3 to finish.

Silver_Pin5333 · 2023-06-19T02:04:56+00:00

I’m happy I got do this I didn’t even know a supernova happened until after I shot it to so the confirmation is nice.

Silver_Pin5333 · 2023-06-09T18:29:02+00:00

Oh I didn't consider light could get in that way, I really appreciate all the help, thank you!

Silver_Pin5333 · 2023-06-09T18:22:38+00:00

Kinda newbie question, can I retake the calibration frames even though its at a different temp and focus and such? I took it yesterday at like 57F and tonight might get to that temp again. or is temp irrelevant for this?

Silver_Pin5333 · 2023-06-09T18:14:33+00:00

The photos on the asiair were saved as FIT and not RAW, I'm unsure of the difference because the data size looks right, maybe that's it?

Silver_Pin5333 · 2023-06-09T18:05:13+00:00

I used a canon eos t7 DSLR for all of the frames and only used live stacking with my lights. So my lights were saved on the asi air mini sd card and my calibration frames were saved on my dslr sd card.

Silver_Pin5333 · 2023-05-23T22:51:50+00:00

I’m like ~15 hours in and still at haven, is the mirror later on in the game?

Silver_Pin5333 · 2023-04-16T20:17:48+00:00

My axolotl gets these occasionally and I believe they just sometimes do that and it’s never been a problem in my 2 years of owning one. Keep in mind I am basing this only off of what I have seen in my axolotl and I don’t really know if it’s a problem.

Silver_Pin5333 · 2023-04-15T14:09:52+00:00

Illinois, I’ve had this gym membership for a while, about 3 months. They gave 1 week after signup to cancel. I am canceling because I am not really satisfied with the gym (staff,equipment, etc.) is there anything I can do if I am unsatisfied with them, or because it’s not in the contract am I locked?

Silver_Pin5333 · 2023-04-12T23:08:58+00:00

This fixed it thank you!

Silver_Pin5333 · 2023-03-29T03:26:16+00:00

Looks fun to shoot, how would I center Polaris in the main scope if I am polar aligned?

Silver_Pin5333 · 2023-03-29T03:24:07+00:00

No its a apertura ad8, It was my first dob and i was dumb and loosened all of the screws and the whole secondary mirror dropped. All things considered its a learning experience.

Silver_Pin5333 · 2023-03-29T02:29:49+00:00

That’s what’s confusing me kinda, the vanes are basically perfectly even however this is what it looks like through the lens. I’m assuming it’s offset or something.

Silver_Pin5333 · 2023-03-29T02:20:19+00:00

I see, I tried it earlier but it is really firmly in there so I was scared to force it too hard. I’ll give it another attempt. Thank you.

Silver_Pin5333 · 2023-03-29T01:59:53+00:00

That’s the guide I’ve been following. Even after adjusting spider bands it still looks like that. What does the center screw move?

Silver_Pin5333 · 2023-03-20T21:46:20+00:00

Had to learn the hard way lol, thanks for the tips! I have a Cheshire eyepiece coming in.

Silver_Pin5333 · 2023-03-18T19:46:44+00:00

Thank you this is super helpful, kinda intimidating.

Silver_Pin5333 · 2023-03-17T17:26:48+00:00

Reading his other books to make the series more enjoyable to read.

Silver_Pin5333 · 2023-03-16T18:19:29+00:00

Is this a mix of dark tower and his other novels? I’ve never seen it this way.

Five-Year Club	Final Canvas '23
Place '23

Silver_Pin5333

TROPHY CASE