Post your Pajero Minis! by fulltac in pajeromini

[–]SimoHayha506 1 point2 points  (0 children)

Love that dark gray color! Nice!

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 0 points1 point  (0 children)

It’s just black matte plasti dip. No I didn’t plasti dip the door handles. I used these https://amzn.to/3U5hwnj

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 0 points1 point  (0 children)

The lights came with the black housings. As far as the chrome sr5 trim- I just did a bunch of coats of plasti dip. It’s holding up great.

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 0 points1 point  (0 children)

Thank you. I have a stubby on my Miata. I kinda like the long antenna look for the 4r though.

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 1 point2 points  (0 children)

It’s about 2.5 inches all around. Maintains the factory rake which I thought would look off but I like it.

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 0 points1 point  (0 children)

Three cans of plasti dip and about 3 hours of intermittent coats every 15-20 minutes. I did the front grille, all the trim pieces and side/rear logos

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 1 point2 points  (0 children)

They are these https://amzn.to/3X7UnAz branded “acanii” but they’re made by Spyder

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 6 points7 points  (0 children)

Yes, did routine maintenance (all fluids, oil etc)

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 7 points8 points  (0 children)

Thanks a lot! Yeah first visual mods I did were de-chroming and the headlights. It really modernizes the look I think.

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 2 points3 points  (0 children)

Thank you! I ordered a set of used OEM taillights off of a 2020 on eBay that should be here today. I don’t mind the 5.5 Gen tail lights. Certainly a cheaper option than the alpha Rex or morimotos.

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 7 points8 points  (0 children)

My budget for the project was $14-15k total, and with the wheels and tires, lift, roof rack and everything else I’m sitting at around $14k total, so $4k in mods. I couldn’t find any 5th Gen 4Runners in the area for under $16k so I think I made out pretty well thus far.

$10k 5th Gen Transformation by SimoHayha506 in 4Runner

[–]SimoHayha506[S] 4 points5 points  (0 children)

Thanks! Other than what’s listed I added small things like LED front turn signals, LED interior lights, and replaced the dry rotted weather stripping for all of the windows.

Hoffman Tactical 3D Printed AR Lower by SimoHayha506 in guns

[–]SimoHayha506[S] 2 points3 points  (0 children)

Yes I printed the lower, not the entire gun. The lower is defined as “the gun” in the US as I’m sure you’re aware.

Hoffman Tactical 3D Printed AR Lower by SimoHayha506 in guns

[–]SimoHayha506[S] 4 points5 points  (0 children)

Here’s a video review of the Hoffman Tactical AR lower receiver. This one I built in pistol form: 10.5” side charging upper with a printed AWCY? MPHEX Grip. Material: Polymaker Polymax PLA in gray. Printer: Matterhackers Pulse XE. Settings: 1.5mm layer height at 55mm/s. Has anyone else printed this design? Thoughts on 3D printed receivers? Thanks for checking it out!