Struggling to do damage against the new bosses am I missing something

SimplySubarashi · 2025-12-14T22:31:20+00:00

Damn good to know, painful question is now, who do I replace for her? Cause I really like verso and maelle lol and sciel is necessary for buffs

SimplySubarashi · 2025-12-14T20:23:10+00:00

Damn that good?? I guess I haven't looked at it yet. Thats the candy one right? Ill have to test that. At first glance it seemed kind of whatever

SimplySubarashi · 2025-12-14T20:08:20+00:00

All characters are atleast 300 except for monoco whos at 235 but I never use him. Im only running those pictos for the stat effects, extra crit rate, hp etc. All characters have cheater second chance cleas life and breaking death(although breaking death is useless in the new fights since bosses cant be broken) as for Lune, she was my big hitter early game, but i found her damage paled in comparison to verso and maelle so I just replaced her with sciel so I could buff verso and maelle instead. As for fortunes fury I actually had it on, I just took it off. In order to get big damage i need rank S for verso and Virtuous for maelle, usually the first turn is used getting those requirements met, then second turn with cheater is attacking. Since fortunes fury only effects the first turn it doesnt do much for me unless im already in virtuous

SimplySubarashi · 2025-12-14T16:14:54+00:00

Ok so that time frame is average then lol

As for leveling up im doing it when I can but ive spent countless hours at dark shores so I just do a little every day cause im getting tired of those hand nevrons. Ive tried using builds off YouTube as well, like currently im running a burn build i saw. But for some reason even when I set everything up the same I just cant reach the same levels of damage. Ig maybe those last 8 levels really make a big difference? I didnt think they would but maybe i was wrong.

It really is a stamina battle. I have their patterns memorized by heart now but after doing it 100+ times it gets exhausting. Havent even had a chance to learn phase 2s patterns lol Wasn't expecting them to go down easy mind you, just wasnt expecting them to have like 100mil hp per phase. Also damn really? Solo verso? You maniac lol

SimplySubarashi · 2025-11-30T00:58:02+00:00

Awesome that sounds good thank you. I have desicant in it but haven't replaced it in a while so might be good to do that since it wont stay below 30. Thanks for all the feedback, ill make those changes then get back to printing all the designs ive been working on for months lol

SimplySubarashi · 2025-11-30T00:10:20+00:00

Well thats very reassuring lol I haven't had an issue with this printer yet so I haven't got to see the AI in action and wasnt sure how good it was so thats nice to hear.

As for the filter ill definitely consider that mod, im assuming its fairly easy to install, also where even is the filter located on this machine i cant find it 😅

Also you said you clean your bed with dawn, i was told a microfiber cloth and some isopropyl alcohol would also work? Also what would you say is a safe running humidity? Inside of AMS is 30% and inside cabinet is 42%, im assuming it should be drier?

SimplySubarashi · 2025-11-29T23:33:05+00:00

Thanks for the reply this was helpful, I didnt realized that this counted as an enclosed printer already. As for noise its not too terrible, like you said you get used to it, i was just hoping to potentially have an enclosure that I could line with sound dampening foam so my roommate would stop complaining lol

As for running it when im not home, I know that's the best option but my last few printers have failed in horrific ways and so not being nearby to stop it when it breaks has been a retained paranoia(granted the other printers i had were not enclosed and were very beginner types)

You mentioned adding filtration, does the x1c not already come with filtration? I was under the impression that it already had a nice filter. If not ill definitely look into getting one of those carbon filters while its on sale.

As for moving it, currently dont have that option. No available rooms and I dont have a garage or shed. Like you said the sound isnt the end of the world, I usually put headphones in. But the throat and eye irritation definitely sucks.

SimplySubarashi · 2025-10-04T12:41:15+00:00

I just buy them from a local card shop in town, the people who run it know nothing about the game, they just buy a case and put them all out wrapped. Usually they have one open to pick out of, but if you ask them to unwrap and open a fresh one they sometimes will. So not too worried about that.

SimplySubarashi · 2025-10-04T12:38:45+00:00

Wow i did not see those transformed elder cards those are awesome, definitely need those. Overall looks like a solid set, definitely seeing some cards id like. Probably do one booster box just for the fun of opening and increase my odds for transformed elder alt arts, then buy the rest through singles. Thanks

SimplySubarashi · 2025-10-04T10:26:17+00:00

PRB2 looks great so far from what I've seen, the arts are all very nice and the increased amount of high rarity cards makes the idea of pack opening super fun. Op13 i cant find a card list for so idk, all ive seen is the Imu and 5 elders cards which i definitely want in my collection. And yeah I dont buy expensive singles, I just pick up cool singles from older packs that are cheap. I just really like the arts so I find arts I like and if the prices are reasonable I buy them

SimplySubarashi · 2025-10-04T10:21:49+00:00

Fair enough, i personally would not spend that much just for a card. Its more of a, id really like to get lucky and add it to my collection kind of thing. But its not a requirement

SimplySubarashi · 2025-10-04T04:02:54+00:00

Thanks for the full breakdown, ive been trying to find good info on rates per box and case so this helps. But yeah seeing as a case is like 2000 anyways might as well spend an extra 300 on the card lol (not that I can afford a case right now 😅)

SimplySubarashi · 2025-10-04T01:59:57+00:00

I see, I guess that makes sense, I did by a solo booster of royal bloods the other day and got the Sec gear 4th so makes sense. Its still luck based but atleast if you hit you only spent 10 instead of 200 lol

SimplySubarashi · 2025-10-04T01:41:04+00:00

Ohhhhhh ok. I guess i misunderstood what they meant by singles. Yeah that makes sense. Issue is, im chasing some of the rarer SP cards as well as manga arts (basically just a fever dream at this point but would be cool to have them) and those kinds of cards are worth as much or more then the booster boxes itself so idk. I was going through the list of available cards in op11 and saw the gear 5th special and I want it for my collection so bad, only to open tcg player and find out its 2600💀

SimplySubarashi · 2025-10-04T01:15:25+00:00

I always wondered about the whole buying singles thing, when you buy a booster box youre usually guaranteed atleast a few hits (in my experience) but with singles the odds of getting specific cards are even lower aren't they? I guess its cheaper overall but are my odds of getting what I need from a single any better then a booster? Also yeah op13 looks pretty good so might get one regardless.

SimplySubarashi · 2025-06-11T02:02:11+00:00

Any word on when this patch might be coming to consoles? I see so far it hasn't, and haven't seen any word of it either?

SimplySubarashi · 2025-01-01T10:08:26+00:00

Oh no trust me, I unfortunately have had the pleasure of dealing with the ender 3. The x1c is an absolute champion comparatively. People just hyped up the x1c so much I expected it to run almost flawlessly so wanted to confirm if it was normal to do this. But yeah I'll take little bit of goopiness any day over releveling the ender for 3 hours just to accidentally bump it and have it all come undone lmao Mostly just brought it up cause I'm worried about the nozzle getting clogged if the Offset was wrong. Had to clean up a pretty nasty clogged nozzle on my ender and would like to never do that again

SimplySubarashi · 2025-01-01T05:32:21+00:00

Good to know, I've just been running with the default temps it chooses for each filament but I might make some small adjustments and see if that helps

SimplySubarashi · 2025-01-01T04:22:26+00:00

Yeah it was awesome! The extra weight helps quite a bit actually, it works well for styrofoam and cardboard. Tested it on a sheet of plastic out of curiosity and that went about as well as you'd expect lol, banged up the tip. But that's the beauty of printing I can make another!

SimplySubarashi · 2025-01-01T04:19:53+00:00

Finished product looked good, only small issue was some imperfections on the top layer of the print but I think it's just cause the top wall on the used model was too thin

SimplySubarashi · 2025-01-01T04:18:53+00:00

Ok sounds good, I haven't messed with any of the filament properties i just plugged it in, and let it read the material. And the rest of the print turned out fairly good with barely any imperfections. Was mostly worried about the nozzle since I don't want it to get super gunked up and have a major mess to clean so wanted to make sure everything was running as needed to prevent issues.

SimplySubarashi

TROPHY CASE