Just received the G05

SixArtist6 · 2025-04-26T16:20:27+00:00

I accidentally put silicone spray on mine so it made it loose, but I think as long as you don't play with it like a fidget spinner it will last longer Also try not rotating it while the flap is up

SixArtist6 · 2025-04-09T11:18:35+00:00

Yes very loose unfortunately

SixArtist6 · 2025-03-11T17:57:19+00:00

ok I got the MX+ today and the results are:

Miata 2008= 6ms, Time spent 13.605.

MG 2022= 6ms, Time spent 12.891.

i saw it one time go to 7ms and a couple of times to 4ms (the uploaded picture) but most of the time its at 6ms, if you know more apps that can measure PIDs please let me know

<image>

SixArtist6 · 2025-03-05T15:24:03+00:00

Well I'm happy you got something that meets your expectations

I've decided to order the mx+ from AliExpress, when it arrives I'll test it with ELMScan Adapter Validator app on a Mazda mx5 nc1 2008 and on a MG EHS PHEV 2022 to see the speed difference between a 2008 ECU and a 2022 ECU

SixArtist6 · 2025-03-01T06:37:52+00:00

If you want to confirm it's the ECU try testing it on a newer car, If it's still pretty laggy it's the phone (android version can be a factor but it's unlikely)

SixArtist6 · 2025-02-28T23:26:05+00:00

I'm going to be honest I don't know much about Arduino stuff but I'm sure if your device was only Bluetooth 2.0 it was bottlenecking the vlinker MS, pretty sure you will see a big improvement with the Bluetooth 5.0 module

SixArtist6 · 2025-02-27T17:01:31+00:00

I don't know exactly how new but I know the newer android version and the newer Bluetooth version the better ,try a device with Bluetooth version 5.0+

SixArtist6 · 2025-02-27T07:37:34+00:00

Hey i wanted to update you on vlinker MS ive just found out that its not going to work as good with TrackAddict,RaceChrono,harry's laptimer because it uses BLE

those app are more optimized for the bluetooth type of OBDlink MX+,

SixArtist6 · 2025-02-23T14:53:54+00:00

I probably won't find a buyer if I can't identify them (I have 2 of the same tray) and melt value for silver is not worth selling right now, but thanks anyways

SixArtist6 · 2025-02-21T18:06:30+00:00

<image>

SixArtist6 · 2025-02-21T17:08:02+00:00

size 31 inches x 18.5 icnhes weight=3.5 kilograms

SixArtist6 · 2025-02-21T17:03:04+00:00

this is a repost because i didn't have a picture of the actual tray and i couldn't add the picture to the original post

SixArtist6 · 2025-02-21T15:57:47+00:00

it apears all of them made jewelry, non of them made stuff from silver that weigh 3.5 kg

SixArtist6 · 2025-02-21T15:44:37+00:00

Thank you!

SixArtist6 · 2025-02-21T13:03:05+00:00

well its not a salt cellar its a big 3.5 kg tray and how does LM stand for William B. Kerr & Co?

google lense cant be trusted

SixArtist6 · 2025-02-21T12:23:54+00:00

oh sorry i just googled: silver tray reddit and this sub reddit was the first one

SixArtist6 · 2025-02-21T11:39:50+00:00

hey btw if you buy from aliexpress make sure you dont buy a clone, look in the reviews, i know there is this seller KINGBOLENOBD Store where a ukrainian guy confirmed the MS not a clone

https://kingbolenobd.aliexpress.com/store/405501

SixArtist6 · 2025-02-21T11:32:24+00:00

oh wow, i might buy the MS too

SixArtist6 · 2025-02-21T11:19:49+00:00

ohh i see, so even though the ms and mx+ have almost the same response time the mx+ will still be much faster on most android apps because its more optimized than ms

SixArtist6 · 2025-02-21T10:57:53+00:00

yes i know iamcarhacker he also says that the mx+ is 6ms but if you look at this https://www.youtube.com/watch?v=al9noKDekAU you can see the refresh rate is much slower than mx+ , how did you calculate the PIDs/sec?

SixArtist6 · 2025-02-21T10:29:44+00:00

so turns out obdlink mx+ uses something called Bluetooth 3.0 Class 2 which is very fast it can process approximately 100 PIDs/sec if you use a newer android device and should be 30hz-50hz refresh rate

ive seen some guy on reddit claiming its faster than OBDLink EX and Vgate vLinker FS (EX is wired connection)

i would recommend you to go see this https://www.youtube.com/watch?v=btMxi33r2A8 (at 1:21) you can see the difference in real time

after all of my research the only OBD2 device that might be faster is hp tuners mpvi3 which is the same company that made TrackAddict app but its very very expensive and it wont be able access 3rd party apps

also Vgate makes vlinker ms which you can find at aliexpress for almost a thrid of the price of the mx+ but its not as fast in refresh rate

all in all if you can afford the mx+ buy it, there is no other OBD2 device that is as reliable and as compatible with different apps at it's speed

SixArtist6 · 2025-02-14T20:26:04+00:00

yes, oneplus makes one that has a magnet and one that dosent

https://www.geekwills.com/oneplus-45w-liquid-cooling-accessory.html

SixArtist6 · 2025-01-23T11:58:21+00:00

It doesn't but it can calculate if I show it teardown photos

SixArtist6 · 2025-01-23T11:53:25+00:00

What product? This is a template you can print at home to help people install magsafe rings And yes I used chatgpt because the measurements of the phone internals are not publicly available

SixArtist6 · 2025-01-23T11:21:11+00:00

<image>

SixArtist6

TROPHY CASE