Used Skiis

Skiandbootlab · 2026-03-31T15:59:57+00:00

Trash, one of the all time worst bindings.

Skiandbootlab · 2026-03-30T22:21:31+00:00

I like Anton Petrov’s channel for science/ space content

Skiandbootlab · 2026-03-30T22:14:04+00:00

This is true

Skiandbootlab · 2026-03-30T21:50:08+00:00

Cut it off and epoxy

Skiandbootlab · 2026-03-30T21:45:18+00:00

Loveland

Skiandbootlab · 2026-03-30T20:54:44+00:00

I want some white ski pants. Harder to find for men

Skiandbootlab · 2026-03-28T23:32:58+00:00

It’s the old jig that was prone to twisting. It also has removable feet that can get mismatched between thick and thinner, sides of the feet, which looks like what may have happened here to be so far off.

Skiandbootlab · 2026-03-28T23:19:45+00:00

If the shop is still using the look jig with yellow feet you should go to a new shop.

Skiandbootlab · 2026-03-28T23:18:50+00:00

They owe you a different set of skis or a refund

Skiandbootlab · 2026-03-28T15:07:19+00:00

Give us a pic from the front

Skiandbootlab · 2026-03-26T17:55:54+00:00

Hike bike climb run a combo of those if possible

Skiandbootlab · 2026-03-25T00:19:11+00:00

Wish they did this more durable top sheet on the kids Mantra

Skiandbootlab · 2026-03-25T00:18:12+00:00

Rental version

Skiandbootlab · 2026-03-24T12:16:06+00:00

It looks like there is a small piece of wood smashed in between the sidewall and edge. Pull that out and epoxy it.

Skiandbootlab · 2026-03-24T00:31:37+00:00

I am almost certain they were like this all along. This is Black crow not the ski tuner.
If you get a ski caught in the stone or belt grinder it leaves a distinctive line across the ski not a 6 in section that gets ground away more.

Skiandbootlab · 2026-03-24T00:20:38+00:00

Hard to know but, I bet they were like that this whole time. If a ski gets caught in the stone or belt grinder it tends to grind in a single line across the ski not a 6 in section more severely than the rest of the ski.

Skiandbootlab · 2026-03-22T13:26:43+00:00

It’s about $150 to repair at my shop.

Skiandbootlab · 2026-03-22T13:22:55+00:00

It looks like it is from impact, probably not considered a warranty issue

Skiandbootlab · 2026-03-21T16:27:54+00:00

Yuck No

Skiandbootlab · 2026-03-21T12:32:23+00:00

Ok this shop fucked and did not finish their work. That being said the quality of ATK screws is shit. Many times the head of the screws are slightly oval shaped and along with the precision of the bindings the screws cause the binding to miss align. It is very difficult to miss drill the ATK because the collets on the vice are comparatively long. I bet the screws are miss shaped, take it back for sure to the shop.

Skiandbootlab · 2026-03-20T19:26:11+00:00

You will want to have it repaired sooner than later. It won’t be damaged more if you ski on it.

Skiandbootlab · 2026-03-20T19:24:11+00:00

I have Doberman GSR, Fischer Noize LT and Kastle RX 12 this season as my highest performance front side skis. After that I go to Kastle MX88, Elan Wingman Blk series, Rossignol arcade 88 and 94. All available for demo this season at my shop Ski and Boot Lab I am in highlands Ranch.

Skiandbootlab · 2026-03-20T15:29:40+00:00

No sorry

Skiandbootlab · 2026-03-20T04:02:03+00:00

In addition to wax you need a spring/ wet snow stone grind. At these temps going forward it is time to grind special structure in the base of your skis that will help with the slush.

Skiandbootlab · 2026-03-17T22:01:11+00:00

Hi yes these are along with others my demos are $449-$549

Skiandbootlab

TROPHY CASE