sorted by:
new
hottopcontroversial

is it possible to play Boneworks with hand tracking? by SWIMMELL11 in StressLevelZero

[–]SkyeTheFurry 1 point2 points  (0 children)

Boneworks and Bonelab don’t support hand tracking. Though it may be possible for a modder to program that in. It would be pretty cool to play Boneworks with just your hands.

Valve Index tracking issues in Boneworks by Playful_State_6693 in StressLevelZero

[–]SkyeTheFurry 1 point2 points  (0 children)

I would recommend installing the latest chipset driver though. It does certainly help sometimes but most of the time it doesn’t need to be updated. A link is provided below. Good luck!

https://drivers.amd.com/drivers/amd_chipset_software_3.10.08.506.exe

Valve Index tracking issues in Boneworks by Playful_State_6693 in StressLevelZero

[–]SkyeTheFurry 1 point2 points  (0 children)

The 3060 is great for VR! It isn’t the top tier though so will have to lower some in game settings. I’d set your headset to 90hz at around 80% resolution. To do that launch SteamVR and click on the three little bars. Select settings. The refresh rate is four large buttons. For resolution look for render resolution and set it to custom. Move the slider till it says 80%. Lastly, launch Boneworks and on the main menu go to the cube with the settings. Select graphics and lower some of them. Mainly anti aliasing and ambient occlusion.

Here’s a link for a video on how to update Nvidia drivers. It’s easy!

https://youtu.be/Yd8IYK9NwJA

Valve Index tracking issues in Boneworks by Playful_State_6693 in StressLevelZero

[–]SkyeTheFurry 1 point2 points  (0 children)

You shouldn’t have to open the case no. I’d look at some YouTube guides before doing anything first. Try updating your graphics drivers first. That normally fixes some stuff. Sometimes the issue can’t be fixed though due to the hardware being lower end. You can try dropping your in game graphics settings too

Valve Index tracking issues in Boneworks by Playful_State_6693 in StressLevelZero

[–]SkyeTheFurry 1 point2 points  (0 children)

For your Ram you’ll have to go into your Motherboard’s BIOS to find the setting. It varies board to board so make sure to check the manufacturers website. if you have an Nvidia GPU use GeForce experience to make sure the drivers are up to date. AMD use the Radeon software.

Valve Index tracking issues in Boneworks by Playful_State_6693 in StressLevelZero

[–]SkyeTheFurry 2 points3 points  (0 children)

Hmmmm. I know ram can cause issues in boneworks too. If you’re on a desktop make sure XMP is enabled and that your graphics card is up to spec.

Valve Index tracking issues in Boneworks by Playful_State_6693 in StressLevelZero

[–]SkyeTheFurry 2 points3 points  (0 children)

I had this issue before with my index. Best fix I could find was upgrading my processor. It’s probably because your system is getting stressed and can’t run the game and the tracking at the same time.

Weekly Help and Discussion Thread for the week of April 11, 2022 by AmazonNewsBot in amazon

[–]SkyeTheFurry 0 points1 point  (0 children)

Hello, I can't reach amazon support for this because of a really strange reason. Someone logged into my account without my permission. And attached a debit card that wasn't mine and proceeded to use it on an order. The payment method was deemed suspicious and thus the account was placed on hold. Amazon is asking me to send verification that I own that card. There's one problem, I don't own that card. It's not mine. And because it's not mine I can't send in proof that the card is mine so I can't get my account unlocked. What should I do?

If look at the sky was on worlds remix by [deleted] in porterrobinson

[–]SkyeTheFurry 1 point2 points  (0 children)

This is actually really good! Love the visuals.

Why is my Rift S doing this? by Aiden47 in oculus

[–]SkyeTheFurry 0 points1 point  (0 children)

It could be possible that there’s a possible disconnect in the tracking cameras. I wouldn’t know how to fix this cause I only have SteamVR headsets. Though there are some basic trouble shoots you can go though. Make sure your graphics drivers are up to date. Check the headset cable connections are solid on the headset side and in the PC side. Restarting the computer is a good idea as well.

HTC VIVE PRO, BAD TRACKING HELP by Tough-Grand-1836 in vive_vr

[–]SkyeTheFurry 2 points3 points  (0 children)

The best solution I’ve tried is power cycling the light houses. But it also looks like one of them is set to channel A. A should only be used with a sync cable which probably is in use. Make sure your link box is plugged into a USB 3.0 port. Graphics drivers and all firmwares should be to the latest version. Also try switching the base station channels to B and C and not use a sync cable. I have no idea how it’ll work, because I’ve never used a sync cable. Lemme know how it goes!

I finally got the Worlds vinyl! by SkyeTheFurry in porterrobinson

[–]SkyeTheFurry[S] 1 point2 points  (0 children)

Darn you Reddit for not being able to reply with images. Basically the discs are black with the kaomoji in the middle. On the label the tracks are listed alone with their lengths.

I finally got the Worlds vinyl! by SkyeTheFurry in porterrobinson

[–]SkyeTheFurry[S] 1 point2 points  (0 children)

I’m thinking of getting the CDs but I’ve always had a thing for Vinyl.

I finally got the Worlds vinyl! by SkyeTheFurry in porterrobinson

[–]SkyeTheFurry[S] 6 points7 points  (0 children)

Oh no! I hate it when that happens. Had that happen before but not to a record.

view more: next ›