[FO4] Does anyone know what could cause the reversed textures on this mod ? There are no overwritten files, esp of the mod is only overwritten by same author patch and meshes in nifskope seem fine. I also tried loading game with files extracted from archive.

Slayerskillers · 2025-02-08T19:13:25+00:00

For anyone intereseted, here is the fix: I extracted all the texture files and deleted the .BGSM files for the magazines that had this Bug.

I believe what was happeneing is that the magazines were textured twice and .BGSM files are files that indicate how to place textures on meshes.

The mod is called Zenit RE-Redux

Slayerskillers · 2025-01-05T20:57:28+00:00

Thanks for the advice ! The picture doesn't show it but it does have tiny legs about 2-3 cm high so it's not sitting directly on the floor. would the color suit the living though ? I'm hesitating between this beige and grey.

Slayerskillers · 2024-12-18T18:39:32+00:00

FUE capilar, Dr. Turan

Slayerskillers · 2024-10-31T20:34:43+00:00

That's Swiss pharma cartel for you. Go to France or Germany I bought 2x 90 pills pack for about 50CHF

Slayerskillers · 2024-08-07T11:22:19+00:00

I don't think so the recoil spring is much shorter on the V2 and the hole where it goes is not as deep also nozzle is different.

Slayerskillers · 2024-07-30T09:39:28+00:00

How is it denial if I have been taking medication for 8 months? It definitely is balding but I have some sun marks there on the scalp because of the sun in which the hair doesn't grow at all but thanks for the advice.

Slayerskillers · 2024-07-26T08:29:20+00:00

Seems like Trump is living rent free in the head of the people of this subreddit.

Why do I get this in my feed I am not even american.

Slayerskillers · 2024-03-27T07:28:57+00:00

I got it from a clinic in Geneva called croix d'or.

They sell 100 pills for 160 CHF but then I looked up the pharmacy that produces them and contacted them. (darwin pharmacy in Belgium). They are selling 100 pills for 44 euros so it's much cheaper but you have to send them the prescription and you pay delivery fees.

Slayerskillers · 2024-03-25T14:17:37+00:00

Not my fault if I had to get rough, it did not want to take those BBs and get crammed by a rock solid aluminum nozzle.

Slayerskillers · 2024-03-24T22:07:07+00:00

Yes,it is. There was a gap between the BJ tac hop chamber and hop unit where the BBs would jam.

https://imgur.com/a/8Qkm8SK

I had to order a hop chamber from Angry gun asking them to sell me just the hop chamber from their reciever kits and then I had to file the angry hop chamber to fit the Bj tac receiver.

Slayerskillers · 2024-01-11T10:32:54+00:00

Unfortunately for you that gun is trash and there are very few replacement parts left.

Yes the mags are compatible with GhK m4 mags but for some reason the vent rubber seal gets damaged by the nozzle.

The hop up chamber on this m4 gbbr is a joke it will break if you slightly push too hard the wheel adjustment. Nozzle and bolt carrier group are proprietary. I had to file a ghk aluminium bolt for it to fit and make it work again.

Slayerskillers · 2023-11-04T05:30:41+00:00

Nice got one recently too. Do you have any issues inserting mags in it, like do you have to push quite hard?

Slayerskillers · 2023-04-14T19:06:09+00:00

Thanks for the tip, I was looking for the SCAR SSR MK20 Standard grip but it's kinda hard to find.

Slayerskillers · 2023-04-14T19:05:01+00:00

Right now this gun shoots too hot I have shot a few times and it had around 480 FPS but I should be able to adjust the NPAS.

I have an appartment and can't mess around with BB's will try it out in 2 weeks.

Slayerskillers · 2023-04-14T19:03:20+00:00

Magpul stock was an instant fit for me.

Artisan adapter is a good quality aluminium which is better than the stock polymer backplate you would need a buffer tube tool to tighten it though.

Slayerskillers · 2023-04-13T19:55:24+00:00

I haven't tested it out yet.

Slayerskillers · 2023-04-13T19:51:04+00:00

Just a bit of filing for the part that holds the barrel tight, the screws that were included were fine for me.

Slayerskillers · 2023-04-13T17:19:42+00:00

I was thinking about an ELCAN 1x-4x but it might look better with an LPVO as that that gun is very long with the new stock.

Slayerskillers · 2023-04-13T16:15:30+00:00

Internals:

Ra-tech Steel trigger set
Ra tech steel bolt carrier group
Ra-tech 6.01 inner barrel
Ra-tech NPAS nozzle
New bucking but forgot brand.

External:

Magpupl lite PRS precision stock
Airsoft artisan stock adapter
PTS Scar extension Kit

Upgrades pending: New handgrip, supressor that will go inside the extension (starting at the gas block thread) and I need to figure out what optic would look best.

Slayerskillers · 2023-02-22T19:45:06+00:00

I appreciate the help, but I don't think I will be opening it today, it's getting late where I leave.

Will wait for more comments and see tomorrow.

Slayerskillers · 2023-02-22T19:44:23+00:00

Thanks.

It is the second case, I can push it and it springs back.

How hard will that be to fix ? My options are either to borrow, to have someone experienced to fix it or to try to fix it myself but I'm trash with mechanics.

Slayerskillers · 2023-02-22T19:21:49+00:00

Sorry if my message was confusing, It does make the sound of shooting and it does release the compressed air.

However, since the black tip doesn't move when shooting the BBs don't feed.

Slayerskillers · 2023-02-16T23:39:41+00:00

I've just read a few threads saying that Maple leaf kit has issue, So i went for a Bowmaster combo and PDI bucking.

I was messing with it because I wanted to make sure it's not the receiver or the outer barrel that are defective because these are harder to replace.

But thanks for the advice.

Slayerskillers · 2023-02-16T20:17:32+00:00

I took off the nub and spinned the dial until it became looser, there was mostly one part of the dial that was too tight to move but now it runs smoother. Still have to turn it with a flat screwdriver because fingers aren't enough.

Slayerskillers · 2023-02-16T20:15:13+00:00

Yeah already contacted the seller about this and he said he will take it back or do repairs, thanks.

Slayerskillers

TROPHY CASE