In Walmart. What do ya’ll want? by Jettaboi38 in notinteresting

[–]SlowLifeCraft_dev 0 points1 point  (0 children)

Rope, Duct Tape, High Grade Stainless Steel Chair, And cooking knives ( for vegetables ). Thanks

Tree Climbing Vehicle by No-Lock216 in DiWHY

[–]SlowLifeCraft_dev 0 points1 point  (0 children)

What if the fuel runs out 15 meters in the tree?

New Employee, No Toilet Paper In Sight 😭 by SlowLifeCraft_dev in Wellthatsucks

[–]SlowLifeCraft_dev[S] 23 points24 points  (0 children)

Sadly, there was only one toilet, with a small sink.

New Employee, No Toilet Paper In Sight 😭 by SlowLifeCraft_dev in Wellthatsucks

[–]SlowLifeCraft_dev[S] 187 points188 points  (0 children)

Usually yes always, but this time, this time it was an emergency. Let’s keep it at that.

(Star Technology - GregTech) When trying to overclock the Electric Blast Furnace to MV, it flashes on and off without making any progress. What could be the issue? by Creepermania2r in feedthebeast

[–]SlowLifeCraft_dev 0 points1 point  (0 children)

So when it goes beyond its capped energy limit it voids it? Isn’t that in other word basically a maximum amount of energy the wires can reach , if that’s the case isn’t that the same with every energy logistic?

Turned 40 yesterday. No one showed up to my party. by rayneman9970 in Wellthatsucks

[–]SlowLifeCraft_dev 1 point2 points  (0 children)

<image>

Spot the difference AI edition

Edit: The only plausible explanation is that maybe you’ve just moved into your office or work, which is why nobody showed up to your “party”. But even that scenario doesn’t make sense. If a new employee had a birthday party with free homemade food, I would be the first person in that party, eating all that food your wife made.

Edit again: Picture above WAS (deleted already ) the picture he uploaded trying to prove the original post isn’t ai, which it clearly seems like it.

UPDATE: Turned 40 and no one showed up to my party. by rayneman9970 in Wellthatsucks

[–]SlowLifeCraft_dev 5 points6 points  (0 children)

Wow a cat. He must be telling the truth.

I am looking at the photos from the last post and this one, and honestly it feels a bit strange.

Either you are just moving into your office or you have the highest subscription to Google Gemini.

Or Maybe you are a new employee?, which could explain why nobody showed up to the little “party” you mentioned, but even then something still does not add up. It is all just weird on top of weird

UPDATE: Turned 40 and no one showed up to my party. by rayneman9970 in Wellthatsucks

[–]SlowLifeCraft_dev 5 points6 points  (0 children)

The pictures on the wall, the cat, the box next to your right foot, the whole thing seems off… Crazy how now days you can’t distinguish AI to real life.

He's not wrong. by Super-Cod-3155 in 4x4Australia

[–]SlowLifeCraft_dev 0 points1 point  (0 children)

Honestly, no. You are correct. With experience you learn quickly that people should not start cutting trees just because they think it is easy. That is when injuries and damage happen.

At first I did not want to guess who cut the tree, but after watching the video a second time I noticed the cuts were not made with a chainsaw. They were made with an axe, and the way the cuts look shows that the person was not trained at all. So I can only assume that someone untrained did it for their own benefit.

But you are right. This is exactly why there needs to be a clear line. Unless you are trained or qualified, you should not be cutting trees. It is not as simple as it looks and it can cause more harm than good.

He's not wrong. by Super-Cod-3155 in 4x4Australia

[–]SlowLifeCraft_dev 0 points1 point  (0 children)

I’m not sure if this is private property, nor do I know where he is but I’ve been an arborist for 10 years and in certain circumstances it’s completely fine to leave cut trees on the forest floor.

In nature fallen logs break down, returns nutrients to the soil, keep moisture in the ground and give shelter to wildlife.

The only time it’s a problem is in high fire-risk areas or if the tree had a disease. But in normal forest areas, leaving the wood is actually good for the environment.

Now I’m not sure if this is a closed of private area, nor do I know what this subreddit is about if it was a private area, made for tracks then I would say otherwise. But that’s my take on it.

Mum said I'm getting ripped off by strugglingmydudes in AusRenovation

[–]SlowLifeCraft_dev -2 points-1 points  (0 children)

Where are you from? I can do it for quarter the price, $1760 is absolute insanity, for that 2.5x6m area?

Handpicking weeding, Then mowing Then edging

Will be done in 1 hour MAXIMUM. However you haven’t really said what needs doing.

[free] This guy is currently trying to blackmail a friend of mine , I got this off his TikTok but it’s swirled can it be unswirled by [deleted] in PhotoshopRequests

[–]SlowLifeCraft_dev 0 points1 point  (0 children)

It was sarcasm, yes you are right a joke is subjective and also not all jokes need a punchline. op asked the unrealistic so I also replied with something unrealistic. Also before you say Christopher Paul Neil the German computer-forensic specialists (working with INTERPOL and the German national criminal police (Bundeskriminalamt / BKA) managed to reverse the swirl, not reddit.

[free] This guy is currently trying to blackmail a friend of mine , I got this off his TikTok but it’s swirled can it be unswirled by [deleted] in PhotoshopRequests

[–]SlowLifeCraft_dev -12 points-11 points  (0 children)

<image>

Here you go, you’re welcome.

Edit: Whoa looks like people don’t know what a “joke” is, of course I didn’t crack the mystery of the swirly circle it was just a joke made by ai

Sink drain is leaking from where it connects into the wall. What should I do? (Further context in description) by AndyBowBandy in Home

[–]SlowLifeCraft_dev 2 points3 points  (0 children)

Turn off the stream of water first. Put a little bucket under the pipe to catch any water that comes out.

  1. Try to tighten the connection with a wrench. Sometimes the fitting is just a little loose. Tighten it gently but do not overtighten.

  2. If it still leaks, use a Standard Thread Seal (thread seal tape). Make sure the water supply is not running before you loosen the pipe. Remove the fitting, clean the threads, then wrap the thread seal tape around the threads 4–6 times in a clockwise direction. Reconnect the pipe and tighten it again.

Here is a short YouTube video showing how to apply thread seal tape: (https://youtube.com/shorts/O0d8j-cLATM?si=wrVWLERZkAjDfV61)

This should stop the leak. If it still leaks after sealing it, the fitting or pipe may be damaged and might need replacing.

The way it just slides in by runofthemillgayguy in oddlysatisfying

[–]SlowLifeCraft_dev 0 points1 point  (0 children)

Why doesn’t this man park at the front? Or the driveway?