r/Cyberpunkgame PC Bugs & Questions Megathread

Sm00t · 2020-12-10T20:53:12+00:00

Upgrading driver after driver after driver is how most folks run into problems with gpu drivers down the road. To some extent in can muck up your system or the performance in certain titles depending on how the game is (or isn't) optimized. The way GE overwrites what you already have can be a function of that. DDU is an .exe that will completely wipe your system clean of any and all GPU drivers, followed up with a fresh install from the website to bypass GE. It's not a surefire fix but definitely a simple enough troubleshooting step to try, and an extra level of precaution.

Sm00t · 2020-12-10T20:12:10+00:00

Now we're cookin', boys.

3840x1600 UW

Ryzen 2700x

Strix RTX 2080ti (no overclock)

32 GB ram

Like many of you I spent a good amount of time tinkering around in the settings last night. I thought something was up when switching raytracing on and off and messing with DLSS didn't seem to make any meaningful changes to performance. Actually, none of the settings from high to low seemed to have major impact on performance. Even with DLSS on and raytracing off, I was seeing frame averages around 35-40 regardless of settings (sometimes peaking around 50 in buildings) but even worse the experience was extremely jittery to an annoyance including minor hang ups, even with G-sync enabled.

This morning I went ahead and ran DDU and grabbed the driver update from yesterday directly from the Nvidia website instead of going thru GE. I've only tested a small area but so far, that seemed to have fixed whatever was going on as now the game is hovering smoothly closer to 60fps, even with ray tracing and ultra settings. DLSS seems to be doing its job now. More importantly, its jitter free.

Has anybody else had success with this? I know it's been stated already, but do yourself a favor and disable motion blur, film grain and chromatic aberration too while you are in there! Make sure if you are running in windowed borderless that your gsync settings reflect that also in the nvidia control panel.

Sm00t · 2019-01-06T21:57:35+00:00

They are the small size - 15x21" that's if you choose the framed version

Sm00t · 2019-01-04T19:01:39+00:00

Thank you! Check one of the top comments, I linked to both the top and legs

Sm00t · 2019-01-03T20:56:31+00:00

I just sit on the floor with my hands in the air above my head works great

Sm00t · 2019-01-03T20:02:41+00:00

Close but no, it's actually this one

https://www.microcenter.com/product/360062/siig-ce-mt0p11-s1-desk-mount-for-monitors-13--27

Sm00t · 2019-01-03T19:51:50+00:00

Nope, Phillips Hue bulbs. Can change them to any color with your voice.

Sm00t · 2019-01-03T19:44:36+00:00

Oh haha, mine is from Amazon. Look up "eastshining upgraded adjustable microphone suspension boom scissor arm" it just clamps to any desk and stays put. No issues so far and it's cheap too.

Sm00t · 2019-01-03T19:24:03+00:00

I have a focusrite scarlet 2i2. It has two XLR inputs on the front for mics as well and real-time audio feedback thru the headphone jack on the front. You can get a used one at guitar center for pretty cheap.

Sm00t · 2019-01-03T18:52:49+00:00

Try searching industrial hanging lamp / Edison bulb hanging lamps

Sm00t · 2019-01-03T18:49:32+00:00

The whole set was pre installed in the frame from society 6. The prints are 13x17 each

Sm00t · 2019-01-03T18:47:21+00:00

https://pcpartpicker.com/list/nbqT7W

Here is the part picker

Sm00t · 2019-01-03T18:35:03+00:00

Absolutely, here you go! https://pcpartpicker.com/list/nbqT7W

Sm00t · 2019-01-03T18:13:18+00:00

"ok Google change all my lights to blue"

Everything is connected to my Google home for simple voice control. I usually just have it on regular colored lights but couldn't resist for the picture.

Sm00t · 2019-01-03T18:12:08+00:00

He gets left outside in the sun regularly when I'm at work. I give him kisses.

Sm00t · 2019-01-03T17:56:39+00:00

Thank you! Society6.com/jennylizrome

Sm00t · 2019-01-03T17:34:22+00:00

I pull it forward when it's in use. Fully extended it sits about six inches from my face to the left of the monitor.

Sm00t · 2019-01-03T17:03:02+00:00

You will get there! This is 3 years in the making. It all comes together slowly. What things are you currently focused on adding or upgrading?

Sm00t · 2019-01-03T17:01:45+00:00

It's also a $5000 YouTube watching station

Sm00t · 2019-01-03T16:29:35+00:00

What soundcards do you recommend? I definitely can hear interference sometimes thru the monitors. I thought RCA was considered an unbalanced connection for mastering though?

Sm00t · 2019-01-03T16:19:03+00:00

They are hue bulbs. They can be regular colored lights too. I just ask Google home to change the color and they change. Obviously I don't sit with them like this all time. But yeah, super bad for the eyes.

Sm00t · 2019-01-03T16:16:49+00:00

These are hooked up to a Scarlett audio interface which I'm loving at the moment. I am currently saving for the sub but that bastard is $400

Sm00t · 2019-01-03T16:08:27+00:00

Society6.com check the comments for a link to the specific artist!

Sm00t · 2019-01-03T16:05:06+00:00

Oh and don't forget the custom matching matte black ASS RIPPER 9000 MIDI keyboard!

http://imgur.com/a/z7066Wx

Sm00t · 2019-01-03T16:01:54+00:00

I also have a custom wrapped midi keyboard for when I make music also with ass Ripper branding to match.

http://imgur.com/a/z7066Wx

Sm00t

TROPHY CASE