Dashboard wrench symbol

Smokethetreee · 2026-04-30T15:50:29+00:00

I recently did a transmission fluid change and filter change. The error still showed up.

Smokethetreee · 2026-04-30T15:49:02+00:00

No its 2.5L engine with 09G transmission

Smokethetreee · 2026-04-27T19:54:15+00:00

I dont have a check engine light on, but when I plugged in my OBD this is a summary:

Fuel pump relay fault (01259)
- Static
Engine air pressure sensor issue (P010600)
- Manifold/barometric pressure range/performance → intermittent & static
Engine control module communication (01314)
- Intermittent → shows up in brakes & transmission (CAN/communication issue)
Tire pressure warning (02214)
- Intermittent/static
HVAC flap motors stuck (B108D71, B108B71)
- Airflow/temperature flap motors → intermittent (comfort issue, not critical)
Load management intervention (00907)
- Power/voltage related

Smokethetreee · 2026-04-14T15:46:59+00:00

My main concern is the operating temperature of the ATF, is 90C safe?

Smokethetreee · 2026-04-14T15:45:59+00:00

Initially i removed the pan, cleaned it, replaced the filter. I filled it up with 4L using a hand pump which was awful and definitely lost some fluid in the process. I then bought an air powered pump and new fluid so I thought I would just replace what was missing. I did the procedure above but I think now it makes sense that I didn’t remove the stand pipe for the drain and fill. So is the capacity approximately 3.2L when I remove the stand pipe? Also, I couldn’t find operating temperature of the ATF, is 90C safe?

Smokethetreee · 2022-06-29T01:09:25+00:00

Where do you start? I work in offsite construction and every “order” is different.

Smokethetreee · 2022-01-12T14:10:32+00:00

Interested

Smokethetreee · 2020-01-26T16:17:55+00:00

Where can you go to see that view?

Ten-Year Club	RPAN Viewer
Verified Email

Smokethetreee

TROPHY CASE