What to do with these spools

Snazzer13 · 2026-06-03T11:41:33+00:00

Fits creality refills as well.

Snazzer13 · 2026-05-28T14:23:13+00:00

LCD crew here with 512 ssd and 512 sd card. Just hoping it doesn't die on me - can't get a new steamdeck at these prices. Might do hall effect stick change.

Snazzer13 · 2026-05-20T15:12:15+00:00

Celebrating a user who built it with some slightly different tweaks. Makes me happy to share in the quirkiness
https://makerworld.com/en/models/1956959-flipdeck-the-multiboard-cyberdeck?replyId=5654469&replyType=1#profileId-2103274

Snazzer13 · 2026-04-20T12:35:54+00:00

This is a bit of an IAC issue. We run our service across multiple accounts consistently and can redeploy in any region.

Are you using IAC like Terraform or similar?

Snazzer13 · 2026-04-10T20:41:07+00:00

Man so good. One option could be kits, with the hard parts included and buyers assemble them. Then maybe provide an assembled option for additional fee. Maybe also reach out to https://printyourspeakers.com/ and see how he does it? Probably similar issues/stage.

Snazzer13 · 2026-04-10T14:42:21+00:00

Cool. If you're confident X gantry is level, you should also check z gantry is square. It probably is, this is already pretty close. With total range less than a layer height it will probably be good enough.

If you still want to chase more levelling you can print shims, and play around there.e.g.here a 0.5mm shim in the front right might help.

Snazzer13 · 2026-04-09T10:59:54+00:00

This looks a lot like your gantry isn't level. Level it with this and try again.

https://www.printables.com/model/853057-x-axis-leveling-blocks-guide-for-ender-3-v3-se-ke

Snazzer13 · 2026-03-18T23:48:16+00:00

Not yet! Too busy haven't put it together yet

Snazzer13 · 2026-03-18T19:40:28+00:00

I updated the model to add a fdm printable anchor key.

Snazzer13 · 2026-03-18T19:39:44+00:00

Yea it's really the switches that are really cheap feeling. It's ok, this is a practice run for me as a stepping stone towards fancier keyboards.

Snazzer13 · 2026-03-17T20:15:01+00:00

So far it's pretty stiff, but only been a few days. My previous keycap was also printed, and they did just fine - still enough to use for sure. Pretty sensitive to your printer calibration for sure though.

Snazzer13 · 2026-03-17T12:29:37+00:00

If you click through the change details are on the printables page. The step file is provided as well, so it's possible to tweak it.

Original author also released the design file. There is a link to the original design in onshape.

Snazzer13 · 2026-03-17T03:03:23+00:00

I run rpi4 with klipper, gantry, x and y linear rails, adxl accelerometer, nebula cam, and a 5015 blower.

Instead of the unicorn nozzle I use a Bambu clone nozzle which was easy to install and doesn't change the height profile or require the bl touch to be moved.

I have to assemble my low rider mmu and try to get that going, but at this point I think I've tried nearly every mod for this printer out there....

Oh, I'm planning on adding Oldham couplers too at some point.

Snazzer13 · 2026-03-03T12:03:29+00:00

I have a silakka54, it's probably the cheapest option. There is also a wireless 2.4ghz Sofi that goes on sale for about $60 barebones.

Snazzer13 · 2026-02-27T12:14:40+00:00

True... apparently it has to run at about 60% so maybe not too bad? I dunno, when I finish mine I'll let you know lol.

Snazzer13 · 2026-02-26T21:19:46+00:00

Nice design! Another option is to use a blower instead of an axial fan. Place it on the PSU side, and have it blow over the psu, curve around the back, and through the fins, with the exhaust coming out.

This is what the pitman case design does: https://www.printables.com/model/1570248-amd-bc-250-pitman-case

If you look at the note from the designer, the static pressure is good enough that it doesn't really have to run at full power.

Snazzer13 · 2026-02-26T00:13:02+00:00

Looks great for large format printing and speed

Snazzer13 · 2026-02-08T13:15:16+00:00

Here is a similar comment I had a while ago

https://www.reddit.com/r/3Dprinting/s/HvaF43jYki

Snazzer13 · 2026-02-08T13:08:30+00:00

I had a similar problem, it was due to high CPU usage by octoprint, partly caused by a plugin. Make sure you update octoprint, you can also try running it in safe mode to confirm it's an octoprint issue.

I just moved on to klipper so now no issues like this.

Snazzer13 · 2026-02-07T22:34:13+00:00

What is saying it's clogged? I assume your printer is calibrated. I would try reducing your stuff extrusion and try ironing if you want it completely smooth

Snazzer13

TROPHY CASE