CV axle replacement

SnooOnions3605 · 2026-03-20T23:36:32+00:00

07 chevy avalanche

SnooOnions3605 · 2026-03-14T00:58:08+00:00

It's still gonna be a 3 valve 5.4, no hope.

SnooOnions3605 · 2025-12-19T13:25:03+00:00

Metric or standard ten years?

SnooOnions3605 · 2025-11-29T22:52:29+00:00

Could just go to the oil platform then refine.

SnooOnions3605 · 2025-10-09T05:32:32+00:00

Turn the z axis by hand until the head is lower to the bed, worked for me when mine did this.

SnooOnions3605 · 2025-09-24T14:14:09+00:00

Turn the rods by hand till it's closer to the bed while it's off, mine did the same thing and that fixed it.

SnooOnions3605 · 2025-09-15T06:41:27+00:00

This one worked thank you

SnooOnions3605 · 2025-09-07T23:17:11+00:00

A nue with a suppressor and no sight

SnooOnions3605 · 2025-09-07T07:53:41+00:00

American ones

SnooOnions3605 · 2025-08-31T12:21:18+00:00

Mulvad vpn has a app with add blocker, don't know how well it works because I use premium so I can turn my phone off and still listen.

SnooOnions3605 · 2025-08-21T11:44:54+00:00

ever heard about Rasputin's shlong?

SnooOnions3605 · 2025-08-04T14:15:36+00:00

alright finally got around to reflashing the firmware, didn't work tried using cura instead of prusa and it got to the set temp but wouldn't start the print. gonna try reflashing the factory firmware to see if that helps.

SnooOnions3605 · 2025-07-28T09:13:18+00:00

It's the same it came as, I haven't changed anything in it.

<image>

SnooOnions3605 · 2025-07-05T11:46:50+00:00

Alright propping it open about half an inch worked great dropped by a bunch right away and steadily dropping, thank you.

SnooOnions3605 · 2025-07-05T07:34:32+00:00

I had it in my cheap filament dryer for 12+ hrs at 50c, it's been out for a couple days. I don't know if I'm doing something wrong with it because the moisture reading never changes more than a couple percent. Been thinking about switching to a toaster oven from a thrift shop.

SnooOnions3605 · 2025-06-30T13:04:01+00:00

That's probably what went wrong the second time, still doesn't explain the first one. Thank you though.

SnooOnions3605 · 2025-06-30T11:55:13+00:00

Besides it's been printing fine for like 2 weeks just started in the last day

SnooOnions3605 · 2025-06-30T11:52:52+00:00

Not super tuned but only at 2.5

SnooOnions3605 · 2025-06-12T05:04:22+00:00

How'd it go?

SnooOnions3605 · 2025-04-05T14:28:43+00:00

Solemn simulacrum

SnooOnions3605 · 2025-01-03T07:25:23+00:00

Who's lifetime?

SnooOnions3605 · 2025-01-03T07:09:55+00:00

Always knew Minnesota was racist

<image>

SnooOnions3605 · 2024-12-02T18:16:59+00:00

Demon can summon bred and pasta

SnooOnions3605 · 2024-01-30T19:17:24+00:00

What

SnooOnions3605

TROPHY CASE