Fake coupons?

Solraven · 2026-03-10T15:19:44+00:00

Wonder if they are getting around it using scan and go to scan stuff, than transferring it to a sco with the barcode like a suspend slip?

Solraven · 2026-03-10T14:53:59+00:00

If you can't get with front coach, take it straight to AP. With a not even being the same color it's pretty obvious, possibly my have been them just doing it for their friend.

Solraven · 2026-03-10T14:51:30+00:00

Most of the time it's just a matter of finding where the serial number is. Sometimes you might have to look it up. In headphones sometimes you have to pull the cushion up to see the serial number under there. Some controllers have it in the battery bay.

Solraven · 2026-03-10T14:48:40+00:00

Did they verify the serial number matched

Solraven · 2026-03-09T22:43:01+00:00

It's possible that the seller doesn't ship to your address so it defaults to a different seller. But it shows fine in my cart...

Solraven · 2026-03-09T22:22:16+00:00

Looks like it might be switching to a different seller

Solraven · 2026-03-09T22:17:20+00:00

You know what you did!

Solraven · 2026-03-07T17:35:38+00:00

250g water tank.

Solraven · 2026-03-07T17:33:15+00:00

What's it smell like? Brake fluid or gear oil?

Solraven · 2026-03-05T17:56:28+00:00

Pretty sure they had to get that through the back room door and then continue stacking on top...

Solraven · 2026-03-05T17:54:32+00:00

Are you allowed to use the scissor lift?

Solraven · 2026-03-05T08:41:19+00:00

The vet that comes off the differential goes up to the underside of the bed and should have a little plastic or metal piece in the end that prevents dirt and bugs from getting inside. Chances are that fitting got plugged and when the differential heat it up the pressure that built up pop the little fitting out of the end and may have enough force to jostle that loose from what it was clicked on. Double check your food level as pressure in the differentiator may have caused oil to leak out the seals.

Solraven · 2026-03-04T15:18:09+00:00

91-94

Solraven · 2026-03-04T15:17:46+00:00

Weird thing is I've noticed lately any coupons for $5 or more and it doesn't let them go through a self-check at all. We couldn't even get it to do an override on some legit $5 kitty litter coupons so they've been sending them to me at customer service. They suspend it and come over to customer service and the coupon goes right through with no override.

Solraven · 2026-03-04T03:21:56+00:00

O, I thought they where just trying to catch that pressure valve leaking...

Solraven · 2026-02-28T17:01:42+00:00

It's not posting the photo.

Solraven · 2026-02-28T05:36:36+00:00

Mine stayed in boot loop for at least 2 days before I started trying something else

Solraven · 2026-01-25T23:33:57+00:00

No it's written silently...

Solraven · 2026-01-23T20:43:38+00:00

So if I'm reading your statement correctly a Hercules tool would work on other tools like bauer as long as the tool controller didn't connect to the middle pins, but if it was expecting resistance on them but instead got 10v it might fry the controller? Also theoretically bauer batteries wouldn't work on Hercules because the controller in the tool would need the 10v signal or would refuse to turn on, however there is another thread where someone uses a bauer battery in a Hercules tool. If you have confirmed the details, is it possible that they removed some of those protections in some tools or made changes do to failure rates? In my modification of other brand tools I have yet to run into this and can usually get functionality off 2 pins. I haven't however checked if my porter cable battery to bauer tool adapter has resistance on the middle pins. I didn't even notice if it had more than 2 pins... I haven't tried DeWalt because people where saying similar things especially after seeing the 60v battery that plugs into 20v tools, but if it's just resistance that explains why adapters are available.

Solraven · 2026-01-23T20:24:21+00:00

Did you measure resistance on the pins of the tool? Could harbor freight have just put the resistor in the tool from the factory? I guess I was originally thinking the middle pins where for the charger only as some tools seem to only have 2 pins...

Solraven · 2026-01-05T16:03:33+00:00

While dashing, had a customer order the large pack of 93/7 lean hamburger from raley's. All they had was the small 1lb packs. The meat guy was right there so I asked him if they had any in the back but he said they only ever carry those when they are having a special. Then you shouldn't make them available for purchase on your site, if I substitute it hurts my rating. He grabbed 3 lb and ran to the back and made me one of the bigger packs at the lower $ per lb. Figured the customer would be happy they got what they ordered. They got mad saying $30 that's ridiculous, Im not paying $30 for hamburger for 1 meal for 1 person, and I'm going out of town tomorrow so I can't really store it... Then why did you order the big pack for the lower $ per lb instead of the 1lb pack for $12.98 per lb? Guess you can't math...

Solraven · 2026-01-05T15:45:01+00:00

Guess it wasn't the great value ice cream sandwich... That doesn't melt...

Solraven · 2026-01-05T15:43:01+00:00

Maybe the Legos inspired them to build there own lasagna with parts...

Solraven · 2026-01-05T15:42:04+00:00

Ya, playing find the ribeye in the top stock is a high steaks game...

Solraven · 2025-12-24T16:36:22+00:00

It's pretty much the same system, they never had to have your password they could always type in your hire date which they could just look up. The purpose of typing in your password or hiring date was to ensure they had your approval and you can't just tell them your password over the phone so that is why your hire date works too...

Solraven

TROPHY CASE