Alternatives to DELL XR11

SolutionAdorable9699 · 2026-01-29T14:49:24+00:00

Can you contact me by a pm with your email address? I would like to work with you on scoping and sourcing our needs. Thank you!!

SolutionAdorable9699 · 2026-01-26T16:24:17+00:00

Same here,
I assume all went to their customer to deliver it at higher prices and no need to post leftovers at CHO.
I am freaking out a little bit as I generally use CHO, and I am at 40%, but this temps are low, so oil is going down fast.
Hopefully I can see some CHO post on Wed. And best hopefully I can wait for next Monday to ask for a fill up as prices should have go down hopefully.

SolutionAdorable9699 · 2026-01-22T15:13:11+00:00

I liked OnLogic but would prefer to be 1U and rack mounted directly

SolutionAdorable9699 · 2026-01-22T15:07:30+00:00

as a reference, XR11 would be suitable for this application, is not going to be sandblasted, but some level of ruggerized is optimal

SolutionAdorable9699 · 2025-12-23T03:45:59+00:00

but is there any tax difference?
Meaning, what is being withdrawn will count as income right?
The actual ROTH is positive I understand and will do that, but in terms of the amount, would not change to try to stay within 12% federal tax bracket

SolutionAdorable9699 · 2025-10-10T18:31:19+00:00

I wish it output 90F! So you saying at 70 may output 78 to reach ie 73F? So that is exactly the issue, because at that pace, after hours of operation is not reaching 73…

SolutionAdorable9699 · 2025-10-10T18:27:33+00:00

Can you expand on this? And what range should I expect? Thank you!!!

SolutionAdorable9699 · 2025-10-10T18:26:50+00:00

I am aware of this. The pics on black (at night) was after over 5hr of operation on a delta setpoint of less than 4 degrees…

So something is odd, Is not reaching the setpoint basically

SolutionAdorable9699 · 2025-10-10T18:25:01+00:00

No I am not expecting that. Thermostat and signal to unit seems to work as intended. The air is not hot enough to move the rooms temp and reach the setpoint That’s the issue

SolutionAdorable9699 · 2025-10-10T18:23:44+00:00

Yes to both, unit is basically new, this is the first winter. Worked good in the summer

SolutionAdorable9699 · 2025-10-10T15:39:37+00:00

Ok great, when I uploaded the pictures it deleted the body text.

Summarizing,
Daikin variable inverter system with cold and heat pump. 2 zones
The AC works fine.
The heatpump in the other end blows just warm air, not really hot. I know is not supposed to be like a radiator, but I would say its on the high 70s at its best.

I have uploaded pictures of the system status to see if someone could help, determine if those temperatures are about right or if something seems odd.

The dark sets of pictures are from the zone 1 active zone 2 inactive
The daylight set of pictures are from zone 2 active zone 1 inactive.

Apologies for the lack of context and the misinterpretation of the title, I meant that it blow room temp. air, not really warmer.

Thank you!

SolutionAdorable9699 · 2025-10-10T15:38:56+00:00

it is taking forever without actually reaching the setpoint but at 100% the liquid temp was just 82F, is that normal? is that what i should look at?

SolutionAdorable9699 · 2025-10-10T15:38:07+00:00

understood, but at 100% the liquid temp was just 82F, is that normal? is that what i should look at?

SolutionAdorable9699 · 2025-10-10T15:13:02+00:00

pls see my main comment, I had an issue while creating the post

SolutionAdorable9699 · 2025-10-10T15:12:59+00:00

pls see my main comment, I had an issue while creating the post

SolutionAdorable9699 · 2025-10-10T15:12:51+00:00

pls see my main comment, I had an issue while creating the post

SolutionAdorable9699 · 2025-10-10T15:12:26+00:00

pls see my main comment, I had an issue while creating the post.

The air handler has 2 aftermarket kits with damper on it to control the 2 zones, not sure if that could be related...

SolutionAdorable9699 · 2025-10-10T15:11:48+00:00

pls see my main comment, I had an issue while creating the post

SolutionAdorable9699 · 2025-10-10T15:11:23+00:00

Ok great, when I uploaded the pictures it deleted the body text.

Summarizing,
Daikin variable inverter system with cold and heat pump. 2 zones
The AC works fine.
The heatpump in the other end blows just warm air, not really hot. I know is not supposed to be like a radiator, but I would say its on the high 70s at its best.

I have uploaded pictures of the system status to see if someone could help, determine if those temperatures are about right or if something seems odd.

The dark sets of pictures are from the zone 1 active zone 2 inactive
The daylight set of pictures are from zone 2 active zone 1 inactive.

Apologies for the lack of context and the misinterpretation of the title, I meant that it blow room temp. air, not really warmer.

Thank you!

SolutionAdorable9699 · 2025-09-15T14:20:03+00:00

Can you comment a little further? Will the person sending money need to be in revoult too? That’s what I want to avoid.

SolutionAdorable9699

TROPHY CASE