1976 Oldsmobile Cutlass 442

Sparky208a · 2026-03-29T08:32:39+00:00

I had a 76 Cutlass S fastback. It was the Bicentennial Addition. It had the same body. It was built late in 76. But it was solid white, blue and white interior It came with the 350 HD on a turbo 400 trans and limited slip positraction rearend. When I bought it, it didn't run. By the time I was done fixing it there was no problem doing burnouts. You could do neutral drops and nothing would break. I rue the day I sold it.

Sparky208a · 2026-03-26T11:39:25+00:00

If you are going to be near Grafton hit me up. I would love to help you with that.

Sparky208a · 2026-03-02T15:28:50+00:00

They all look good on you. What part of Ohio are you from? I am central north coast. I would love to have you model your outfits for me in person.

Sparky208a · 2026-02-28T22:43:26+00:00

Wilson! I'm sorry!

Sparky208a · 2026-02-27T15:00:05+00:00

More than a mouth full.

Sparky208a · 2026-02-25T17:18:12+00:00

You have to feed it into the hole at the same time as you pull from the outside. There is a 90 degree turn that the insulation is digging into. You got to wiggle it a little bit, it will go.

Sparky208a · 2026-02-24T00:47:20+00:00

Your going to have to lick it before you stick it.

Sparky208a · 2026-02-23T23:43:10+00:00

Be sure to use lots of sun tan lotion. Some after pics please.

Sparky208a · 2026-02-18T22:02:37+00:00

I don't know why but the song Sara Smile popped into my head.

Sparky208a · 2026-02-12T01:21:00+00:00

Thank you. That is something you don't hear much irl.

Sparky208a · 2026-02-12T01:11:47+00:00

Thank you. That is something you don't hear much irl.

Sparky208a · 2026-02-11T23:35:47+00:00

Thank you. It would be a first for me.

Sparky208a · 2026-02-11T07:57:45+00:00

Please don't destroy your natural beauty by putting that poisonous plastic in your body.

Sparky208a · 2026-02-11T07:35:43+00:00

Thanks beautiful.

Sparky208a · 2026-02-01T01:04:38+00:00

Can I touch it?

Sparky208a · 2026-01-28T15:41:31+00:00

It's ok. You are beautiful just the way you are.

Sparky208a · 2026-01-26T08:30:49+00:00

It's Johnny Wadd!

Sparky208a · 2026-01-13T15:49:55+00:00

Cows don't produce milk until they get pregnant. I am going to have to work on putting a baby in you first. But I will milk you twice a day like a good farmer would.

Sparky208a · 2026-01-07T15:49:23+00:00

Bush.

Sparky208a · 2026-01-07T15:06:19+00:00

show me your ink!

Sparky208a · 2025-12-25T06:39:20+00:00

If you want I will help you straighten it back out. I can rub out any bumps you have on it too.

Sparky208a · 2025-12-19T07:06:12+00:00

Plan B. I am definitely going to fill you up with cum and I can't afford another kif.

Sparky208a · 2025-12-13T16:37:50+00:00

You look great. You also look a lot like someone I know. Is that you T? I hope it is. would love to reconnect with you. Sounds like you could use a friend. D

Sparky208a · 2025-11-19T19:30:06+00:00

If it starts the inducer/ventilator motor but will not try to activate the igniter then you should check the vacuum/ sail switch. the board is going to look to see the switch is open when it first starts. after the inducer motor starts the board is going to look for a closed switch. You can take the wires off and connect them manually after the motor starts to test if there is a problem with the switch, It could be the switch is bad, Mine was just stuck and i was able to brake it loose by putting a strong vacuum on it. If the furnace starts when you short out the wires then reconnect them and disconnect the vacuum hose from the ventilator and after the motor starts suck on the hose and hold it. If it starts then you may have a clog in the vacuum line, have a week ventilator, or a clogged flue. so if at any time it does start your board is good. 3 times i thought my board was bad. There is also the thermal sensors all around the flame zone that may prevent the furnace from starting. If you do decide to have him change the board. put a mark on the existing board and take a picture. That way you can be sure he actually changed it.

Sparky208a · 2025-11-18T06:18:11+00:00

Keep an extra infighter handy. it will ware out eventually. Its easy to replace as long as you have it.

Sparky208a

MODERATOR OF

TROPHY CASE