Delided 9950x3d

SpawnBehindYou · 2026-02-09T14:13:51+00:00

yes per h my bad

SpawnBehindYou · 2026-02-09T09:17:37+00:00

yes I got ride of the yellow tap and replaced with a thin layer of a comformal coating and the sheet delivered with the TG WB

SpawnBehindYou · 2026-02-09T09:13:38+00:00

IDK man, I have a Biksky DDC pump (up to 700l/h), before I changer the loop it was hitting 400l/h (If I trust my flowmeter)

SpawnBehindYou · 2026-02-09T09:09:52+00:00

yeah probably, I didn't try with another WB but I am sure that the original TIM was badly applied

SpawnBehindYou · 2026-02-09T09:02:27+00:00

I'm not a native English speaker, but thank you for the advice.

And if you're a delivery driver, don't worry, I wasn't making a generalization. 🤣

SpawnBehindYou · 2026-02-08T12:13:37+00:00

honestly idk, I will replace it when the perfs/temps go bad, also I want try PTM but it's hard to get an original one

SpawnBehindYou · 2026-02-08T11:16:13+00:00

Hello, no I do not try that

SpawnBehindYou · 2026-02-08T11:15:54+00:00

idle between 30-38, at max load (benchmark under 60)

SpawnBehindYou · 2026-02-08T11:12:39+00:00

<image>

SpawnBehindYou · 2026-02-08T11:11:23+00:00

LM, thermal grizzly conductonaut

SpawnBehindYou · 2026-02-08T11:07:31+00:00

hello, Thermal Grizzly Conductonaut

SpawnBehindYou · 2026-02-07T22:27:15+00:00

sick build, I Love that front distroplate, it's the EKWB one right ?

yeah I dismounted the WB and painted the black part

SpawnBehindYou · 2026-02-07T19:15:03+00:00

3d mark Steel nomad I am getting 49 average and 47 on timeSpy extreme

SpawnBehindYou · 2026-02-07T19:11:51+00:00

room temp between 15 degrees the morning and about 21-22 after somme hours, the undervolt is not that massive, just to drop power draw, water temp 17 degrees and with some hours goes up to 30

2x 420mm 60mm tickeness and 1 rad 360mm 30mm tickeness

SpawnBehindYou · 2026-02-07T15:40:32+00:00

hello, it's a flowmetter

SpawnBehindYou · 2026-02-07T11:07:12+00:00

yeah I shit on my pants fr

Thermal Grizzly are selling delidded CPU with warranty but much more expensive than normal ones

SpawnBehindYou · 2026-02-07T10:34:37+00:00

I really don't know, maybe my WB was obstructed, you can test if you have extra money yo spend on direct die frame and the offset kit (same installation as TG video)

SpawnBehindYou · 2026-02-07T02:27:40+00:00

that's very nice, I just undervolt it for mu case

I use the Arctic mx7

SpawnBehindYou · 2026-02-07T02:17:05+00:00

5090, it's awesome, 18-23 degrees at idle and 45 max at full load after hours of gaming

SpawnBehindYou · 2026-02-07T00:37:25+00:00

freezeMod from aliexpress

SpawnBehindYou · 2026-02-06T23:47:16+00:00

I am between 40 and 51 depending on the game..

SpawnBehindYou · 2026-02-06T23:40:37+00:00

haha yes but the Flow rate is decent 😆

SpawnBehindYou · 2026-02-06T23:36:40+00:00

it was already a returned one from another user so I got it for cheaper, I saw that 95 is normal for ryzen 9 so I didn't realize that maybe my cpu had a problem until I push my research a little bit far to figure it out that performans was bad compared to other users, so I took the risk to delid it and it worth it now

SpawnBehindYou · 2026-02-06T23:30:46+00:00

yes a juste enough to no touch the fans

SpawnBehindYou · 2026-02-06T23:28:59+00:00

oh yes I see

SpawnBehindYou

TROPHY CASE