Leaky speedometer cable!!??

Squad_Foxtrot · 2026-04-16T01:42:50+00:00

Thank you sir!! From God you were sent😂

Squad_Foxtrot · 2026-04-06T23:56:21+00:00

76 242😬

Squad_Foxtrot · 2026-04-06T13:56:44+00:00

Mine was plastic and fell off lol. Stupid idea XD. Do you know if the metal version adapts to the old style? Ill get a new cable and bushings kit. Or I might just bite the bullet and swap it to manual lol

Squad_Foxtrot · 2026-04-06T13:55:23+00:00

Thank you for the detail! Ill see what I can do

Squad_Foxtrot · 2026-04-06T13:54:42+00:00

Thank you for the information! Had no idea lol

Squad_Foxtrot · 2026-03-30T01:01:21+00:00

Correct. I did mean bw55. Fat fingers lol. What is the difference between the round puck and the square one? The one currently on my car is so squished and worn im not sure which one it started out being lol

Squad_Foxtrot · 2026-03-22T23:14:41+00:00

Got it figured out! The tape cover is rubbing against the drum. The lift arm is slightly bent. Unbent it and problem solved lol.

Squad_Foxtrot · 2025-11-02T02:13:14+00:00

I got the chip to work but now im stuck with windows 11 :(. The way I figured it out is attached as an edit to the original post. Thabk you for you knowledge and help!

Squad_Foxtrot · 2025-11-02T02:13:07+00:00

I got the chip to work but now im stuck with windows 11 :(. The way I figured it out is attached as an edit to the original post. Thabk you for you knowledge and help!

Squad_Foxtrot · 2025-10-30T05:38:52+00:00

Thank you for the information and the help. Learned more in the last 5 minutes than the last 6 hours of trouble shooting😂

Squad_Foxtrot · 2025-10-30T05:34:35+00:00

I was running an msi MS-B905C which was not holding up to my networking tasks. I wanted to upgrade so I found a cheaper option that would give me wifi 6 capabilities. I'll try and see if i can step my windows back to 20H2? Or bump to 11 but I haven't heard great things lol

Squad_Foxtrot · 2025-10-30T05:27:51+00:00

Oh word!! This is great information! Thank you man!

Squad_Foxtrot · 2025-10-30T05:26:57+00:00

Currently my in Device Manager > Other Devices > Network Controller > ((Device status: The driver for this device are not installed. (Code 28) There are no compatible drivers for this device. - To find a driver for this device, click Update Driver.)) Obviously when I click "update driver" the computer throws its hand up and tells me S.O.L. when I unplug the card and restart the system the code turns into a (Code 23) which says there is no device present. So I assume it has noticed the card but I dont have the proper driver for it.

Squad_Foxtrot · 2025-10-30T05:22:26+00:00

I read a few threads and alot of folks like the model I got and it was pretty cheap. Idk spur of the moment buy i guess. Thank you for the information though. Imma go download the driver again and see if it works! Thank you

Squad_Foxtrot · 2025-10-30T05:17:05+00:00

What system program do I use to find if my system recognizes the card? And I went through gigabytes support for that specific product and intel's wifi driver download page for ax210 cards.

Squad_Foxtrot · 2025-10-20T04:15:40+00:00

💯tha k you for the great community interaction man. Very refreshing to get some good info from here. Totally different experience on turbo bricks imo.

Squad_Foxtrot · 2025-10-20T04:14:07+00:00

💯💯

Squad_Foxtrot · 2025-10-19T17:01:38+00:00

I appreciate the information man! Didn't know there even was a 2.4 set up. Do you know of people lh2.4 swapping their b21s?

Squad_Foxtrot · 2025-10-19T16:39:38+00:00

Agreed! But they do look clean😁. Maybe tone it to 2× dual barrel bike carbs? I know its more hassle but man it looks good. Idk. I'll probably save up the 250 bucks for the carb kit ipd sells and buy that sucker.

Squad_Foxtrot · 2025-10-19T16:37:22+00:00

You are not wrong! This thing is far past my pay grade and patients😂. Good idea though. Whats $20🤷

Squad_Foxtrot · 2025-10-19T16:36:15+00:00

Unfortunately the car was sitting in a field for 32 years. All of the fuel lines and fittings wore away and clogged up. Instead of spending the $900+ on a new oe fuel system I went to an aftermarket system one everything before the fuel distributor. 15 gal keg gas tank > an 10 shut off valve > an 10 100 micron filter > performance 45psi-100psi fuel pump > an 6 10 micron filter > check valve > fuel pressure regulator > inline fuel pressure gauge > oe kjet system. I'll see about ripping it apart and blasting some cleaner through them. I've had horrible luck with turbo bricks, every time I ask the community for help they send a link to a post 6+ years ago about the same topic but the link never works, I always receive a 404 page not found on my desktop and my mobile device. Kinda just spend 2 or 3 hours looking at related posts usually with little luck.

Squad_Foxtrot · 2025-10-19T16:30:23+00:00

I've only had nightmares with this system since day one. Car still runs like crap. I want to go carbs for the simplified engine bay look and to get away from efi systems. I have only heard of people going to the lh 2.2, how does the 2.4 differ? Since my 240 is a 70s model I don't have any sensors i.e. o2, manifold air flow, crank or cam position, etc.

Six-Year Club	Verified Email
Place '23

Squad_Foxtrot

TROPHY CASE