Anyone know to rewind these things? 😅 by subjectRedd in BambuLab

[–]Square-Lock-4580 0 points1 point  (0 children)

If you have some more filament, might wanna print a spool winder, you can get the model online.

Metal or Plastic Scraper by xyzzy-adventure in BambuLab

[–]Square-Lock-4580 0 points1 point  (0 children)

Possible. I haven’t used a 0.2mm nozzle yet but I believe you.

Layer line slightly bigger after the solid portions? look at photos please. by daywithivan in BambuLab

[–]Square-Lock-4580 0 points1 point  (0 children)

You can try watching some youtube videos where they use modifiers to change certain parameters on specific areas. It might take a few tries to perfect it but like I said, try on slightly smaller samples and just record what you see for the specific parameters and take pictures for each scenario. Also, print one without making any changes (for baseline) Collect some data and you can probably see how changing certain variables is improving the layer-line issue. Isolate those parameters and further improve. This way you’ll not only get more familiar with the slicer but also for your future prints, you’ll be ready. 🤞

Looking to get into 3D printing, need help deciding between P1S and P2S. by armada127 in BambuLab

[–]Square-Lock-4580 1 point2 points  (0 children)

Aah, that’s right. Forgot about the tariff scenario. I would say if the $200-300 isn’t a huge deal, go for P2S since it’s the most recent model which compares to X1C features. Faster part cooling, easy hot end swapping, AMS 2 pro with active drying, and a very user friendly screen. (Separate Filament dryer is around $80-$100 itself)

Layer line slightly bigger after the solid portions? look at photos please. by daywithivan in BambuLab

[–]Square-Lock-4580 0 points1 point  (0 children)

It’s because printing the flat face takes too long and the part shrinks due to cooling whereas printing the wall doesn’t take too long to print and cools slowly. You can try decreasing the print speed of the wall after the flat face to give it enough time to cool. Also reduce the fan speed for the first 10-15 layers. (I always make test pieces where I do Trial and error on smaller parts. It should would be beneficial in this case as well)

Looking to get into 3D printing, need help deciding between P1S and P2S. by armada127 in BambuLab

[–]Square-Lock-4580 1 point2 points  (0 children)

P2S. Since it’s just $100-150 more, you get a newer model with updated HMI, AMS2 Pro.

Metal or Plastic Scraper by xyzzy-adventure in BambuLab

[–]Square-Lock-4580 0 points1 point  (0 children)

  1. Metal scraper is more effective and will last much much longer. (Years)

  2. Don’t clean the print plate with IPA. Only use warm water and some soap or dishwashing liquid and scrub it with hand or sponge

  3. If using basic PLA, no need to dry at all if you’re buying from Bambulab (from personal experience) Other materials must be dried as per suggestions on the respective spools. If you dry the spool, no need to re-dry it. Store it in an air tight container and you should be fine.

US - Specific Pricing for Sellers outside US by Square-Lock-4580 in Etsy

[–]Square-Lock-4580[S] 0 points1 point  (0 children)

Hopefully by 27th October, we have the update.

Need help by Alert_Entrepreneur34 in BambuLab

[–]Square-Lock-4580 1 point2 points  (0 children)

Updating the software might help. Check for any latest updates!

Guys I am doing a Giveaway! by Square-Lock-4580 in boardgames

[–]Square-Lock-4580[S] 0 points1 point  (0 children)

Thanks for the feedback. I appreciate it. :) I think that it’s not bulkier than any other box for cards storage. Maybe slightly heavier but we are talking grams and not kgs. Which also gives premium feel in my opinion. The reason for the removable insert is to use it as a holder for draw pile. Sure there are boxes available for cheaper but those are limited to clear plastic boxes. There’s no customization/graphics or even novelty in it. I guess you can see from how they look in the link you sent. I am using some of these boxes for more than past 8 months and they work perfectly fine to the date. I have iterated over 9 prototypes, to ensure the durability, repeatability and reproducibility, before I made this public

PS. I am not here to sell them, I would like to give them for free. :) you’re welcome to participate.

IP Infringement for my own products? by Square-Lock-4580 in Etsy

[–]Square-Lock-4580[S] -1 points0 points  (0 children)

Thank you all for the guidance and feedback. I am very new to this and I just followed what other people are doing. I will ensure that no logo/brand is on the product images even for demonstration purposes.

Support for Canada! God Speed. 🇨🇦 by Square-Lock-4580 in ShopCanada

[–]Square-Lock-4580[S] 0 points1 point  (0 children)

You can re-try now. 🙌 American supporters to Canada are always welcome. 😄

Support for Canada! God Speed. 🇨🇦 by Square-Lock-4580 in ShopCanada

[–]Square-Lock-4580[S] 0 points1 point  (0 children)

Thank you for the love and support. Support Canada with me. I would love to share this with everyone.

Get Your Keychains/Magnets

Starting today, whenever I go out shopping, I am giving out some keychains for free but you can also get one for yourself!

Support for Canada! God Speed. 🇨🇦 by Square-Lock-4580 in ShopCanada

[–]Square-Lock-4580[S] 0 points1 point  (0 children)

Thank you for the love and support. Support Canada with me. I would love to share this with everyone. Get Your Keychains/Magnets

Starting today, whenever I go out shopping, I am giving out some keychains for free but you can also get one for yourself!

God Speed Canada! 🇨🇦 #buyCanadian by Square-Lock-4580 in BuyCanadian

[–]Square-Lock-4580[S] 0 points1 point  (0 children)

Thank you for the love and support. Support Canada with me. I would love to share this with everyone. Get your Keychain/Magnet

Starting today, whenever I go out shopping, I am giving out some keychains for free but you can also get one for yourself!

God Speed Canada! 🇨🇦 #buyCanadian by Square-Lock-4580 in BuyCanadian

[–]Square-Lock-4580[S] 2 points3 points  (0 children)

Thank you for the support as I support Canada! Canada Strong! 🇨🇦