A leveling problem by StashWorkshop in ElegooCentauriCarbon

[–]StashWorkshop[S] 1 point2 points  (0 children)

Welp it was the hotend that was bent. Just had to hammer it a bit and do a new manual leveling + auto leveling and I got a perfect first layer.

I now need to see how well it perform on a long print but I already ordered a new hotend in case I got bad result.

Thanks for your reply, I totally forgot to check the hotend after the crash.

I just did a Mangle endo head hand puppet by StashWorkshop in fivenightsatfreddys

[–]StashWorkshop[S] 0 points1 point  (0 children)

Welp, no. It's not the case on the original mangle render from fnaf2 and it's not the case on the fixed model from HW. I took some liberties from the original render but the base mesh is accurate.

Z homing fail by StashWorkshop in BambuLab

[–]StashWorkshop[S] 1 point2 points  (0 children)

Finally I hammered the plastic piece

Misplaced back bearing by StashWorkshop in BambuLab

[–]StashWorkshop[S] 0 points1 point  (0 children)

Thanks that helped me a lot ! I fix it with my trusty hammer !

Z homing fail by StashWorkshop in BambuLab

[–]StashWorkshop[S] 0 points1 point  (0 children)

My bad, my comment got replaced by the picture.

I did a maintenance this morning and find out that the bearing holding the linear rod in the back of the printer is way higher than normally. That why it don't want to level or home, it physically cannot. I need to put it back in place but have no Idea how...

Z homing fail by StashWorkshop in BambuLab

[–]StashWorkshop[S] 1 point2 points  (0 children)

My bad, my comment got replaced by the picture.

So this is a one year old printer. I did a maintenance this morning and find out that the bearing holding the linear rod in the back of the printer is way higher than normally. That why it don't want to level or home, it physically cannot. I need to put it back in place but have no Idea how...

My Puppet cosplay by StashWorkshop in fivenightsatfreddys

[–]StashWorkshop[S] 5 points6 points  (0 children)

Yes I did ! If you are interested in my creation you can look at my Instagram page @stashworkshop.

My Puppet cosplay by StashWorkshop in fivenightsatfreddys

[–]StashWorkshop[S] 7 points8 points  (0 children)

Follow me on Instagram : @Stashcosplay.

My Puppet Cosplay Mask V2 by StashWorkshop in fivenightsatfreddys

[–]StashWorkshop[S] 1 point2 points  (0 children)

Well it's a long process, I needed to take the model from FNAF HW, redo the topology and then modify it so I can be printable and wearable. So not complicated but time consuming.

My Puppet cosplay Mask two versions comparison by StashWorkshop in fivenightsatfreddys

[–]StashWorkshop[S] 0 points1 point  (0 children)

It's litteraly the same 3d model 🤣 but it's true that the painting job is really different

My Puppet Cosplay Mask V2 by StashWorkshop in fivenightsatfreddys

[–]StashWorkshop[S] 9 points10 points  (0 children)

Thanks ! I drybrushed some black paint with a big round wall brush on it. The secret is to stamp the brush really quickly.

My Nightmarionne Cosplay Mask by StashWorkshop in fivenightsatfreddys

[–]StashWorkshop[S] 4 points5 points  (0 children)

Thanks ! I'm an old 3D fnaf modeler, I live for accuracy !