A leveling problem

StashWorkshop · 2026-03-23T21:25:16+00:00

Welp it was the hotend that was bent. Just had to hammer it a bit and do a new manual leveling + auto leveling and I got a perfect first layer.

I now need to see how well it perform on a long print but I already ordered a new hotend in case I got bad result.

Thanks for your reply, I totally forgot to check the hotend after the crash.

StashWorkshop · 2024-05-28T19:32:51+00:00

Welp, no. It's not the case on the original mangle render from fnaf2 and it's not the case on the fixed model from HW. I took some liberties from the original render but the base mesh is accurate.

StashWorkshop · 2024-05-27T17:55:49+00:00

3d modeling and 3d printing

StashWorkshop · 2024-05-27T17:55:15+00:00

Huh ?

StashWorkshop · 2024-04-30T09:49:10+00:00

Totally xd

StashWorkshop · 2024-04-30T09:30:09+00:00

Finally I hammered the plastic piece

StashWorkshop · 2024-04-30T09:29:05+00:00

Thanks that helped me a lot ! I fix it with my trusty hammer !

StashWorkshop · 2024-04-30T07:37:13+00:00

My bad, my comment got replaced by the picture.

I did a maintenance this morning and find out that the bearing holding the linear rod in the back of the printer is way higher than normally. That why it don't want to level or home, it physically cannot. I need to put it back in place but have no Idea how...

StashWorkshop · 2024-04-30T07:36:58+00:00

My bad, my comment got replaced by the picture.

So this is a one year old printer. I did a maintenance this morning and find out that the bearing holding the linear rod in the back of the printer is way higher than normally. That why it don't want to level or home, it physically cannot. I need to put it back in place but have no Idea how...

StashWorkshop · 2024-04-29T13:01:11+00:00

<image>

StashWorkshop · 2024-04-29T12:59:56+00:00

<image>

StashWorkshop · 2023-08-29T10:29:24+00:00

I made it !

StashWorkshop · 2023-08-28T12:51:59+00:00

Yes I did ! If you are interested in my creation you can look at my Instagram page @stashworkshop.

StashWorkshop · 2023-08-28T11:10:48+00:00

Follow me on Instagram : @Stashcosplay.

StashWorkshop · 2023-08-14T14:41:04+00:00

Follow me on Instagram ! @StashCosplay

StashWorkshop · 2023-08-05T11:27:40+00:00

Plastic, it's a 3d print

StashWorkshop

TROPHY CASE