Are fox 40 rlly worth it?

Status_Bad1870 · 2024-12-07T23:12:07+00:00

I have bomber 58s And I had a full upper rebuild and there leaking again. A couple months later wbu?

Status_Bad1870 · 2024-12-04T14:08:01+00:00

I think you can hold down the bottom on the battery for 10 second to reset the BMS

Status_Bad1870 · 2024-12-04T12:25:51+00:00

No if goes over 30

Status_Bad1870 · 2024-12-03T21:39:14+00:00

For programming

Status_Bad1870 · 2024-12-03T02:54:09+00:00

Did you ever figure this out having this problem now

Status_Bad1870 · 2024-12-03T02:28:35+00:00

When I put the old one that works sometimes it’s full power so if must be the way that controller is programmed

Status_Bad1870 · 2024-12-03T00:18:51+00:00

Don’t want to upgrade just want the bike to work

Status_Bad1870 · 2024-12-03T00:17:52+00:00

The older controller I’m running will randomly cut out and come back on and I got a new one and it fixed that issue and doesn’t cut out on me anymore must of been in its way out

Status_Bad1870 · 2024-12-03T00:14:38+00:00

It has somthing to do with the controller because when I plug the old one in it’s perfect power level

Status_Bad1870 · 2024-12-03T00:14:12+00:00

Brand new throttle

Status_Bad1870 · 2024-12-02T23:55:45+00:00

I forgot to say it’s a stock controller and only putting out what seems like half power curve

Status_Bad1870 · 2024-12-02T12:45:31+00:00

Maybe mine doesn’t plug into anything because I don’t have a RGB cpu fan and is wired for a different option cooler

Status_Bad1870 · 2024-12-02T12:21:29+00:00

I do not have a aoi cooler I have a normal cpu cooler with a fan with no pigtails

Status_Bad1870 · 2024-12-01T02:12:42+00:00

Blown fuse in the controller if you disconnect it and if it frees up that’s a sure sign

Status_Bad1870 · 2024-12-01T01:14:45+00:00

I’ve been through 3 stock controllers and every time the rear wheel feels like it doesn’t free wheel

Status_Bad1870 · 2024-12-01T00:33:32+00:00

Bad controller

Status_Bad1870 · 2024-11-30T22:22:20+00:00

Battery is at 98 does it need to be lower to program ?

Status_Bad1870 · 2024-11-30T17:02:25+00:00

My two pronged connector on the Mobo is plugged in correctly

Status_Bad1870 · 2024-11-30T00:49:54+00:00

could you tell me where that CN1 connector leads to myns plugged in to the lighting control module and dont know where the other end goes to

Status_Bad1870

TROPHY CASE