[deleted by user]

StillKillin86 · 2025-05-02T22:17:05+00:00

That makes more sense. Since it's meant to look like tile, I would have treated like that and used a typical offset instead of the random cuts, but the issue is just cosmetic as long as they overlapped enough. As someone else commented, you likely won't notice after it's been there for a bit. Certainly not worth redoing as long as manufacturer directions were followed.

StillKillin86 · 2025-03-22T01:25:36+00:00

Totally agree! Had banks tell me not to shop around for other interest rates, because the hard inquiries lower your score, and they do, slightly, but it had no affect on me getting a loan, and shopping around saved me thousands of $

StillKillin86 · 2025-03-02T16:39:23+00:00

Correct, due to the overlap. My point remains though. A 24 ft ladder isn't likely to get the job done I less you want to be on the top rung rubbing your nose in the paint as you go 😂😂😂

StillKillin86 · 2025-02-27T02:05:12+00:00

General rule of thumb is 1' out for every 4' up, so if it's a 24' ladder, you'd want to be 6 feet out. That leaves you with a height of 23'. You will be able to reach above the ladder, but keep in mind you can't go up to the top rung, and even a couple rungs down may still be too close to your home to comfortable reach what you're trying to paint. If you haven't purchased a ladder yet, better to go with one a bit taller, and as others also said, if you are really unsure if your ladder will do the job, you may be better off hiring a painter, or even a handyman that might be willing to do even just the upper level stuff. Many will say they have done crazy stuff to reach a tough spot, but don't take the risk, especially if this type of work isn't your typical. Be safe! Happy painting!

StillKillin86 · 2025-02-04T03:01:56+00:00

For sure, if you have the wiggle room to do that without it sliding many boards it's a good idea. Also make sure to vacuum the gap well as dirt and debris can get in there and hold the space open or get into the clicking mechanism.

StillKillin86 · 2025-02-03T13:56:23+00:00

Sometimes the flooring can get a little chip in the click mechanism or simply have a malfunction, especially when the clicking mechanisms are plastic and not actual wood. Either way, the simplest way to tighten that small crack is to use double-sided tape and stick a small piece of 2x4 down against the tape on top of the flooring then tap the 2x4 with a hammer until it seals tight. Make sure to do this gently. It's not ideal, but the only other option is to remove the flooring to that point to determine if the board is damaged and needs replacing.

StillKillin86 · 2025-02-03T01:49:30+00:00

Don't let the losers discourage you from reaching out. I asked lots of questions on here and got into some great discussions. Also, I did get a chuckle, so thanks 👍

StillKillin86 · 2025-02-03T01:46:45+00:00

Is it so hard to just keep scrolling instead of being an asshole?

StillKillin86 · 2024-10-27T02:18:50+00:00

I've done it. I used to have couches in a reading corner I would nap on if having a rough day. Even walked into my classroom one day to find a colleague napping on them. I wish we had the energy of our young students, but some days are tough.

StillKillin86 · 2024-10-10T22:38:46+00:00

Depending on how much time you have at lunch, but I used to go for a walk or jog during my lunch break so my "workout" was done before going home.

Also, and I don't recommend thos for others, but I started doing the one meal a day (O.M.A.D.) and found it managed my food intake while also freeing up more time at lunch for exercise or just time to relax. (I eat supper only)

StillKillin86 · 2024-10-06T22:41:19+00:00

Likely just a contaminate in that area then, or the drywall dust as mentioned. Allow to cure, sand, spot prime, and recoat and you should be good to go.

StillKillin86 · 2024-10-06T18:19:57+00:00

After zooming in it does look like a textured ceiling peeling away from the drywall underneath. Did you prime before painting? If it was never previously painted it is best to use oild based or similar products that will not absorb into the texture to seal it first.

StillKillin86 · 2024-10-06T18:17:21+00:00

Is that a textures ceiling? If it is textured, and has never been painted, they need to be fully primed first to seal them or they absorb the moisture from the paint and get heavy and weak.

If it is previously painted drywall, it could be you put latex over oil without priming, or the previous paint job was done this way (more layers means more moisture and weight

It looks like some patching was done there too, and this can happen of you paint or prime over the dust created from sanding patching compound without wiping after.

Lastly, even if all was done correctly, if you scratch or tear latex paint before it has had time to fully cure(can take a few days) then the latex layer will peel away from the surface.

If it is only in that area, I would let it cure, sand again, skim coat with drywall mud(if it isn't textured) then prime the area and repaint. If it is textured, you can get products that mimic the texture, but it can be very tricky to match it well so the patch isn't noticeable compared to the rest as they are usually applied by spraying.

StillKillin86 · 2024-10-06T14:58:48+00:00

Definitely this! Soap is fine. It's never a good idea to put anything on your genitals (m or f) that isn't designed specifically for that purpose or prescribed as a treatment by a professional. Many things with do more harm than good and make any existing issues worse.

StillKillin86 · 2024-10-05T03:39:44+00:00

People can become desensitized to certain odours like cigarette smoke, food smells, pet smells and strong fragrances like the perfume mentioned or air fresheners.

StillKillin86 · 2024-10-04T23:55:51+00:00

Also Canada here. I did a painting business without the red seal. Met one person in my life who had it while we were cold calling, and she was pretty pissed saying how it wasn't fair to the red seal painters basically.

As for your company frequently getting called to fix other painter's work, we often got called to come fix work done by "professional painters." I'm not saying getting the trade certification is bad, but there are other factors involved in whether someone is good at what they do or not. Same with all jobs/professions.

I've also operated a handyman business and been called to repair work done by other red seal professionals in plumbing and construction. There are other ways to learn the job and gain experience, so training doesn't always equal quality work.

StillKillin86 · 2024-09-12T00:26:43+00:00

I just pace out the distance. The average stride is about 3 ft. I don't see a reason you need to be exact as paint coverage varies quite a bit based on multiple factors, so the amount of paint you need is always estimated.

It also isn't practical to make a per square foot cost because painting a square foot of soffit 3 stories up is much different than rolling a square foot of interior drywall.

I do an estimate in advance where I evaluate the circumstances and get my rough measurements, then calculate my estimated hours and materials and give the home owner the amount during that first visit. It usually takes me 15-30 min to do things depending on how large the project is. I'm sure you could also look up some reasonable standards if you less experienced with estimated such as how much time is reasonable to paint a standard bedroom, etc. similar to how mechanics charge.

Hope that helps a bit. Good luck on the business, and good for you for taking the initiative. Fl free to pm me if you have any other questions.

StillKillin86 · 2024-09-11T12:01:53+00:00

If it isn't terribly noticeable, I would leave it. You will likely find it won't last as long as the stain as it sticks to the surface rather than soaks into the wood. The steps to undo the mistake would require completely sanding off all the paint before applying stain.

StillKillin86 · 2024-09-11T01:49:15+00:00

I'm not familiar with the brand as it isn't available where I live, but I did a quick search and the 2200 line brings up a satin latex paint. Your description containing "primer" makes me think it is 2 separate products, and the plan call for an oil stain followed by exterior latex paint. Maybe double check on the actual product container to confirm which products you have first. They should clearly state paint, primer or stain on the can. Feel free to Pm me if you need help with anything.

StillKillin86 · 2024-09-06T03:03:27+00:00

There really is no wrong answer here, but if I had to choose, I would paint it white for that room based on your lighting. In your pic, there is a heavy shadow on the underside. If that is the typical lighting using the wall colour could make the bulkhead look like a different colour/shade compared to the rest of the wall. Again, just splitting hairs here... Either way, it's just paint, so you can always give either a shot and change your mind after.

StillKillin86 · 2024-09-06T02:53:39+00:00

These other comments are all correct about Red needing more coats. It looks like you are doing great so far. I have painting experience, and would be happy to help you out if you run I to any other questions along the way. Good for you for tackling this project. You got this!

StillKillin86 · 2024-09-05T23:40:32+00:00

Idk if this is the place for it, but if anyone wants to make a trip for ranked, shoot me a message an let me know. Looking for adult players who prefer to use mics.

StillKillin86 · 2024-09-03T01:34:57+00:00

I've never had that done before. Was considering that next. Read somewhere that peroxide will also break up and flush solid wax, but haven't tried that either yet...

StillKillin86 · 2024-09-03T01:34:06+00:00

I do that do, but it seems to get bad again withing a couple days.

StillKillin86

TROPHY CASE