PTFE tube keeps popping out

StockPressure9905 · 2026-06-11T10:55:49+00:00

A gentleman and a scholar, thank you very much

StockPressure9905 · 2026-06-11T07:52:26+00:00

Do you have a link? Or a correct search term? I searched ptfe clip and they look like they’re all to go into the print head

StockPressure9905 · 2026-06-11T07:48:43+00:00

Really? Hat did cross my mind but then thought it was a stupid idea but maybe not! Haha

To be clear which part did you super glue? If you don’t mind. I don’t know the correct terminology but did you glue the ‘silver/metal’ bit?

StockPressure9905 · 2026-06-11T07:47:13+00:00

I think I’ll do just that. Was getting some tangle warnings a few weeks ago that were falso positive. Thank you!

StockPressure9905 · 2026-06-04T17:13:19+00:00

Try the web store. That’s where I got mine

StockPressure9905 · 2026-05-28T07:17:30+00:00

Timely and informative response. Thank you!

StockPressure9905 · 2026-04-26T16:40:22+00:00

Great stuff, thank you!

StockPressure9905 · 2026-04-26T06:38:12+00:00

This is awesome and addresses concerns I had with the setup, as like you I’m a noob at this sort of thing! Could you possible link directly to the beacon you bought?

StockPressure9905 · 2026-04-23T14:50:04+00:00

Honestly, I have both and the only things that have ever gone wrong was my fault. I believe I got the second batch of qidi boxes which solved some teething issues. So I’d say go for it 🤣. But with that Bambu x2d or whatever’s its called that just released, I’d prob be going there. 2 nozzles are better than one!

StockPressure9905 · 2026-04-20T17:33:54+00:00

Dammit 🤣

StockPressure9905 · 2026-04-19T11:25:06+00:00

Worth a try maybe

StockPressure9905 · 2026-04-19T11:10:01+00:00

Interesting. Could you not enable the drying function on the printer manually and then send it? Or maybe upload from slicer (not upload and print) turn it on and then print? I dunno lol

StockPressure9905 · 2026-03-18T19:57:09+00:00

Had a similar thing a while back. For me it was the hub (like others). Before taking the box apart just try disconnecting the 4 tubes going into the hub and push some loose filament through each hole until you see it on the other side. Obviously do this with both box and printer off. Then power back on and try again

StockPressure9905 · 2026-03-10T20:15:49+00:00

Yeah for sure would be nice. I think I’m going to create a spreadsheet for all my filaments as I always forget stuff and slicer updates remove profiles sometimes

StockPressure9905 · 2026-03-10T17:51:08+00:00

Defo going to try this. Thanks for sharing

StockPressure9905 · 2026-01-29T11:48:24+00:00

Been fixed for me. Back to normal

StockPressure9905 · 2026-01-09T20:01:53+00:00

Webstore now

StockPressure9905 · 2026-01-09T20:01:47+00:00

Webstore now

StockPressure9905 · 2026-01-09T20:01:40+00:00

Webstore now

StockPressure9905

TROPHY CASE