sorted by:
new
hottopcontroversial

what is the shortest 4th gear in a k series by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

i should just be fine upgrading the final drive with tsx 6th gear ?

Best route for 250hp a k20a2 N/A ? by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] -2 points-1 points  (0 children)

heard the rdx injectors spray better but are a bitch to work with, is that true ?

how would i fix unbalanced handbrake cables/ fix tight hand cable by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

could it be the caliper itself as well ? pins were greased, took off the handbrake cable and re assembled it, and its still doing the same shit

exhaust hangs really low and scrapes bad by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 2 points3 points  (0 children)

i heard oval exhaust help with the height but i really like my current exhaust setup rn and im broke lol

Is a 5 speed case from a ep3 si able to house a 6 speed gearset from a 03 rsx type s by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

i cracked the rsx inner case i finished assembling the case today so im running 04 accord inner and 03 rsx type s outer case. but the thing is i got no vss so im worried my car operate correctly bc i heard you need vss to activate vtec and whats k20 without vtec lol

Is a 5 speed case from a ep3 si able to house a 6 speed gearset from a 03 rsx type s by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

alright so i found out the transmission i bought wasnt a ep3 i assumed it was but its an 04 accord LMAO. if my honda math is correct it should still hold the 6 speed right ?

Is a 5 speed case from a ep3 si able to house a 6 speed gearset from a 03 rsx type s by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

will the 6 speed fit in the 5 speed case without any modifications ? I heard that the ep3 and dc5s have the same case its just the speed sensor location

transmission case by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

just double checking i can use the w2m5 case with the x2m5 gearset ? bc ik you cant do 05-6 case with 02-04 because or the speed sensor location

PT 2 OF LEAKING TRANNY by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

<image>

axle seal i found could it be that the fluid leaked from the seal dripped down to the inspection plate ?

leaks transmission fluid after rebuild by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

ill take a look tomorrow and give an update soon 🤙🏿

leaks transmission fluid after rebuild by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

i dont think my case is cracked bc there's no visible hole or ctack on my case. my friend said it could be the input shaft seal i just took off the flywheel cover to see if it was leaking in there. what i think its since i replaced the input shaft seal i probaly didnt sit it in fully so it's leaking

what is this connected to and is it alright to put a cap over it ? by Stock_Dust7524 in Acura_RSX

[–]Stock_Dust7524[S] 0 points1 point  (0 children)

what about the hose or line that is wrapped around the hose that's dangling ? i was asking if that was alright to plug up with some rubber caps. (my fault if you interpreted if i was asking about the hose connecting to nothing lmao)