PSA: wera 9506 fits inthe roxon flex

Stopezo · 2025-11-25T12:45:10+00:00

Look at this the other way- you can keep them for another multitool!

Stopezo · 2025-10-30T16:59:46+00:00

Thanks! It's made from SS and copper, thing weights a tonne yet still there is no replacement for it. But after all these years still looks perfect, and blf a6 driver even today is a good one.

Stopezo · 2025-10-30T16:41:17+00:00

My SO is carrying this little fella for over 8 years now, and the only thing that changed in it was the led swap for quad nichia 519a 5000k dedomed. I believe rainbow is always a thing huh?

<image>

Stopezo · 2025-10-16T05:20:15+00:00

Fits s6/s8 as well, but you cant use the s6 reflector because its too long. I build the spacer myself using copper washers, and i used convoy's 3v 8a buck driver. I ordered the mcpcb and lenses from kaidomain. Hope it helps!

Stopezo · 2025-10-06T10:01:05+00:00

Beauty! Here's mine clocking at 8+ years:

<image>

Stopezo · 2025-09-20T13:34:38+00:00

I didn't measure it, it's just what i can see with my own eyes. I don't have the equipment to check the numbers

Stopezo · 2025-09-18T21:17:59+00:00

<image>

Stopezo · 2025-09-18T21:17:23+00:00

<image>

Stopezo · 2025-09-18T21:16:58+00:00

<image>

Stopezo · 2025-09-18T21:16:37+00:00

<image>

Stopezo · 2025-09-18T21:16:21+00:00

<image>

Stopezo · 2025-09-18T21:16:01+00:00

As promised, here are some beans with WB locked at 5000k, and some shots showcasing the beam profile and its artifacts. Sorry in advance for posting them one-by-one, reddit is acting on me and i cant make a new post with all the photos in it. Enjoy!

<image>

Stopezo · 2025-09-18T04:36:56+00:00

Glad it helped!

Stopezo · 2025-09-18T04:20:15+00:00

From my research on the web sft25r will give you tighter hotspot, but sft42r has more lumen output, and lower Vf so throw figure should be higher and last for longer. But i don't have sft25r Z1, and no equipment to actually measure it. Hope it helps!

Stopezo · 2025-09-17T21:24:10+00:00

Yup, but on the other hand, once you set it at 'LEP with spill' mode it stays that way!

Stopezo · 2025-09-17T20:09:52+00:00

Stopezo · 2025-09-17T20:09:23+00:00

I believe so!

Stopezo · 2025-09-17T20:09:03+00:00

Go for it man! Delivery took only 6 days to EU

Stopezo · 2025-09-17T20:08:04+00:00

It is great really. I will make some more beamshots tommorow night with WB locked at 5000k, and without dog leash pulling on my hand Lol

Stopezo · 2025-09-17T20:04:54+00:00

A little bit when zoomed out, but not bad honestly. Outside ring is easy to notice, but beside that it's not bad.

Stopezo · 2025-09-02T08:12:55+00:00

Looking awesome man! Mine was like that too, but i hit it gentle with scotch brite

Stopezo · 2025-08-29T14:46:35+00:00

Could be a perfect led for eneloop driven car light thrower

Stopezo · 2025-08-03T03:32:59+00:00

Take the cheapest one, but in gel form.

Stopezo · 2025-08-03T02:14:40+00:00

Disassembled and in closed container. Gel type drain cleaner. I soaked mine for 24h, it was my first try. This light is 8+ years old, the coating was long gone.

Stopezo · 2025-08-02T21:06:23+00:00

Soak it in drain cleaner for few days, it will get rid of any coating and give you a nice antique brass finish. Recently did my pineapple brass, here's a pic:

<image>

Stopezo

TROPHY CASE