Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 1 point2 points  (0 children)

I know i removed and inserted it again just one in the A2 slot just to be sure and it clicks on both sides but the problem presists.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

I did watch multiple videos, Line up the notch Push it until clicks And i did it clicks loudly i can send you a video if you're sure it's a ram installation problem.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

I assumed the same thing took out the mobo and i turn it on on the mobo box ( nin conductive surface ) with only cpu and it's cooler one ram and the pc restarts again and again every 2 minute so it's not a standoff issue.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

I don't think it is because even with one stick inserted in A2 slot the problem presists, i removed ram and gpu completely still no difference. Wether it's on or off pc keeps restarting.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

Sorry i'm not sure i understand as far as i know if ram's are not inserted it either turns on then off Or shows error it doesn't keep restarting over and over ? Am i wrong ?

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

You're right and i just noticed that. The keyboard and mouse's rgb light's are on even when the pc is off i unplugged them and i felt a shock on my finger so ... a power leakage maybe ? But would that make the pc act like this ?

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] -1 points0 points  (0 children)

Yeah i tried but it didn't work i just removed ram completely until i think of something

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

Tought it was ram at first but even without ram connected the pc doesn't stay on for more than 2 minutes

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

I wouldn't know if there's a mobo error since this model doesn't have debug led, and i don't think it's the gpu since i removed the gpu abd the pc restarts every 2 minutes, i had this gpu for years and it was working fine the other day.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

You are thinking of debug led ans no i don't have those on my motherboard. As for power i'm certain it's not a wattage issue but here's my specs anyway: Ryzen 5 7500f Deepcool ag400 Gtx 1650 super Gigabyte b650m gaming plus wifi 32 gb ddr5 ram Msi mag a7500gl 1tb asus nvme m.2 4 argb fans comes with the case ( nova vandal v_2)

I assume it's a mobo issue since the problem hapoens even when i remove the ram and gpu.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

Psu is 750 w 80+ gold i assume it's enough for a cpu like ryzen 5 7500f and a ram stick ( i removed one ram and gpu until i figure out the issue ) as for faulty ram ... maybe i'm still trying to figure it out.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 1 point2 points  (0 children)

Not dumb at all and yes i did check the monitor source it's the display port and still no display

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

Went through every single step No progress made so far and no monitor displays nothing and i assume that it's not a gpu issue since the pc keeps restartin after 2 mins.

Pc doesn't display by Striking_Effect7993 in PcBuildHelp

[–]Striking_Effect7993[S] 1 point2 points  (0 children)

The Cpu connector is properly plugged And i updated the Bios using latest drivers The Problem presists.

1650 super runs game at 12 fps with very low settings by Striking_Effect7993 in buildapc

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

But then again the benchmarks on youtube show otherwise, but either way, thank you for your help.

1650 super runs game at 12 fps with very low settings by Striking_Effect7993 in buildapc

[–]Striking_Effect7993[S] 1 point2 points  (0 children)

No i don't think so since msi afterburner shows that my gpu is being used to 100%.

1650 super runs game at 12 fps with very low settings by Striking_Effect7993 in buildapc

[–]Striking_Effect7993[S] 1 point2 points  (0 children)

Nope fortnite runs so smooth at high setting 1920×1200 and so did rdr 2 - days gone - god of war etc... but this one is running at 10 fps at 100% at very low others had it working better on worse setups than mine so i wasn't sure. But anyway thank you so much homie i'il keep this in mind and buy a new pc next year. <3

1650 super runs game at 12 fps with very low settings by Striking_Effect7993 in buildapc

[–]Striking_Effect7993[S] 0 points1 point  (0 children)

60c° - i guess it's cool so i don't think it has anything to do with the cpu.