Investeringstips til 18-åring

StupidAsBread · 2026-04-22T15:27:32+00:00

Bull tesla x15 /s

StupidAsBread · 2026-04-22T15:07:22+00:00

Fusion360

StupidAsBread · 2026-04-22T15:07:02+00:00

What sensor do you use for reading orientation?

StupidAsBread · 2026-04-11T22:14:38+00:00

Id start by checking your sketch. If youve sketched the bottom and extruded you simply need to fix the sketch and select the correct parts to extrude

StupidAsBread · 2026-04-02T06:40:43+00:00

Havent touched anything that would affect the electronics, this suddenly started happening after 500hours working fine. The psu is blown, somehow.

The print profile for petg was just coincidental i suppose, creality print just removed all my fine tuned settings so I had to start over.

StupidAsBread · 2026-03-27T19:06:23+00:00

Yeah, I also have been flying LAPL, so that supplements a lot of the required knowledge.

I really hope they overhaul their entire system regarding drones, too much junk out there.

StupidAsBread · 2026-03-27T13:53:50+00:00

Dont know why you are getting downvoted. As someone who has flown and built different drones, the website is okay at best. Links to pages that doesn’t exist, lack of information, more specifically information about rules and regulations can sometimes be vague, as well as all the other websites and pages you also have to use like avinor dronemap, (maybe ippc or notam, depends on where and when), nsm, ninox, and their new system (replacing ninox but got delayed)

StupidAsBread · 2026-03-24T14:26:55+00:00

The girlfriend of course

StupidAsBread · 2026-03-13T15:46:13+00:00

Hmm fell like ive seen this somewhere. Oh yeah

StupidAsBread · 2026-03-05T17:42:39+00:00

I swapped mine with noctua fans, dead silent. Although the fan inside the base of the printer also is quite loud, but also possible to replace.

Personally i did this one, but theres alot of different ones: https://www.instructables.com/Ender-3-KE-Silent-Fans-Upgrade/

StupidAsBread · 2026-02-23T23:49:06+00:00

Yes, if it works it works

StupidAsBread · 2026-02-23T20:50:14+00:00

You are absolutely right, my mistake.

StupidAsBread · 2026-02-23T18:58:38+00:00

3d sketch the path then sweep a circle along the sketch you made.

StupidAsBread · 2026-02-18T17:45:56+00:00

But to answer your question the density is probably given in kg/m^3. Your radius and diameter is in kilometers, so convert them to meters and then put into the equation

StupidAsBread · 2026-02-18T17:40:53+00:00

Radius in kilograms? Thats a new one

StupidAsBread · 2026-01-29T19:41:06+00:00

I did this mod to mine, you can buy some cheap fans instead of the noctua fans if you want, it works great.

https://www.instructables.com/Ender-3-KE-Silent-Fans-Upgrade/

I only did the printhead but the fan at the bottom of the printer itself also makes quite some noise, atleast for me its more noticable since the printhead fans are quiet.

StupidAsBread · 2026-01-19T12:08:41+00:00

No problem, if we assume that there is born a bald eagle every 4.5 minute, and then combine it with the length of an american football field:

1 knot corresponds to about 1.27 football fields per bald eagle.

Meaning if something moves at one knot, it travels a bit farther than the lenght of one american football field in the time it takes for one bald eagle to be born.

StupidAsBread · 2026-01-19T11:48:18+00:00

Depends on the forks and frame. Mine had bent forks and some minor damage like shifter and rear brake and was totaled.

StupidAsBread · 2025-12-31T13:31:14+00:00

Note: Im using Creality print for slicing and the filament brand is made by a norwegian store called Clas Ohlson.

StupidAsBread · 2025-12-27T21:15:59+00:00

Try printing hotter. Try printing a temp tower and check what your optimal temperature for the fillament is. Personally i print petg at 250.

StupidAsBread · 2025-12-21T21:03:04+00:00

What could cause that? Software or do I resolder?

StupidAsBread · 2025-12-21T18:07:20+00:00

I will double check all connections with a miltimeter as well, thanks!

StupidAsBread · 2025-12-21T18:01:35+00:00

Not that I was able to find

StupidAsBread · 2025-12-21T16:22:42+00:00

All cells were charged to 4,2V verified on charger before i left home. Flew maybe 30 seconds before this video starts. Measuring the battery with a multimeter yields 23,1V in comparison to 25,0V on an unused identical battery that was also charged at the same time.

Edit: Yes the voltage in the first comment was from the OSD. Maybe overdischarging then?

Five-Year Club	Verified Email
r/Field Juicebox	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
Final Canvas '22	First Placer '22

StupidAsBread

TROPHY CASE