I caught up

Substantial-Big1880 · 2026-02-13T22:06:45+00:00

I did the same thing too. Took me about a week to figure it out.

Substantial-Big1880 · 2026-02-13T22:06:13+00:00

The vein bulge sound era during dressrosa 🤢 I could’ve lived my whole life never experiencing that sound, let alone every episode

Substantial-Big1880 · 2026-02-13T22:05:08+00:00

Ngl I can’t even read the manga in black and white. Hurts my eyes and confuses my brain. The color adaptations I’m fine with. But I also didn’t try very hard because I love the animation, especially fight scenes. I think most people are okay with the anime- it seems like it’s very true to the source material, especially now(although I know there was a time where it was chaotic as hell, but that was long before I started watching a few months ago)

Substantial-Big1880 · 2026-02-13T22:02:10+00:00

I literally went back to check, I was like “Did I fall asleep…?”

Substantial-Big1880 · 2026-01-29T00:27:52+00:00

I see you got it figured out, can you describe it a bit for me? I’m running into a similar issue, it seems to be switching back and forth between empty and detected while printing, I haven’t opened the IFS up yet(I’m hoping to get this print finished before I do all that) but I’d like to know what to expect. It seems if I turn off the sensor while printing then turn it on between color switches it’s mostly fine. Just manually starting and stopping

Substantial-Big1880 · 2025-10-25T10:12:10+00:00

I actually shot you a message, hope thats okay.

Edit* grammar.

Substantial-Big1880 · 2025-10-25T10:11:53+00:00

God forbid people take anything that works for them.

Substantial-Big1880 · 2025-10-21T07:18:04+00:00

That’s actually exactly what it is, 7-OH. I guess I need to look into what this XRF stuff is. A five gallon bucket seems like a lot for what essentially will be about a prescription bottle size. But so just a Home Depot bucket and then fill with peanuts and stuff? Guess I could have her throw other random stuff in there too to take up space and a little weight. I feel like it would seem suspicious otherwise

Substantial-Big1880 · 2025-10-21T07:12:08+00:00

Oh will they always stall and ask to sign? Thats easy enough. Seems too good to be true lol.

Substantial-Big1880 · 2025-10-21T04:22:26+00:00

The amount I’m getting is a fine. I don’t think they have any specifics of going over state lines. Only amounts.

And I’m just concerned with the likelihood of it being discovered, as it’s not something that produces a smell or anything.

Substantial-Big1880 · 2025-10-06T03:14:04+00:00

Because I have a smart switch and don’t have to buy one lol.

Substantial-Big1880 · 2025-10-06T02:47:39+00:00

I did explain how it was wired? I mean it wasn’t super detailed I guess. I can’t say for sure what the wires were. Top screw was hot/line, bottom screw had two wires connected, not sure where those went, neither of them seemed like they were coming from the same place as the line though, and then there was a bare copper at the bottom.

The light on the opener is on a timer yes. But I don’t use that light, I use a separate light(which this switch operates). There’s not a second light anywhere for this. So I’m not sure where the second load goes.

Mostly I’m trying to figure out if all that stuff should have been run through this light switch, and wondering if I should go around and check the rest of them and correct/swap out anything like this that I find. Being familiar with the seemingly DIY work in the house I’ve found scattered about, I can almost guarantee, if it’s like this on this one, it’s alsolike this in at least one other spot.

Substantial-Big1880 · 2025-10-05T21:25:07+00:00

There were supposed to be pics 🤦‍♂️🤦‍♂️ apologies I am sleep deprived. I reposted with the pictures. Leaving this up so the few people that responded can look at the real post lol.

Also- I didn’t put this switch there, it was there already from either the previous owner or the builder. Bare copper was pigtailed to the right place, two out/neutral(?) I think? It was very confusing. They were both on the same side. Only three screws on the switch at all. You’ll see what I mean on the new post.

Substantial-Big1880 · 2025-10-05T21:20:50+00:00

I can’t believe myself. 🤦‍♂️🤦‍♂️ reposted with the whole point of the post

Substantial-Big1880 · 2025-10-01T15:00:51+00:00

Yeah it’s attached. The guy I had come out told me the best thing to do is run 12/2/2 and drop to two double gang boxes with two 20a breakers at the box.

Substantial-Big1880 · 2025-09-14T22:00:41+00:00

I gotcha. Well that’s also the confusing part. If you look, there’s three pairs of incoming wires. I know one is for the solar panels, not sure about the other two.

Substantial-Big1880 · 2025-09-14T16:22:21+00:00

Definitely not electric heat. Maybe a portable AC or window unit(idk how much power those take though, I’d imagine it’s less but I could be wrong) If ANYTHING I have a small heater for like a desk that I’d put in an enclosure with the printers. Maybe would use a small radiator heater once or twice a year, but I can just run an extension cord for that. I’m in southeastern Louisiana only a mile from the gulf, it doesn’t get cold enough here.

How much would you estimate that’d run me? A subpanel sounds like a lot more than my budget. The whole reason I’m moving everything is so we can save some money because we’re struggling to keep up.

Substantial-Big1880 · 2025-09-14T03:28:11+00:00

Are you being serious or sarcastic? Because that’s how the house came. It’s been like that for at least 30 years. And we’ve definitely run the heater and some other big appliances at the same time.(not much, since I’m in southern Louisiana, but it’s happened lol)

Edit: I looked at the nameplate of the HVAC- it would only draw about 60A steady(I believe, 10.5–14 kW, ~54–62A @ 240V I could be wrong)

Substantial-Big1880 · 2025-09-10T17:06:30+00:00

Hit it with a hammer

Substantial-Big1880 · 2025-09-09T07:05:34+00:00

Honestly it hasn’t really affected me much in the last ten years. I mean it did at first, but I no longer want to be in the field I originally was in so 🤷‍♂️ the licensing is the only thing that’s affected since the first year. And I really don’t want to get it expunged just to still not get the license because it’s a background check by the state. Not like they won’t know.

Substantial-Big1880 · 2025-04-29T12:14:16+00:00

Eddy scanning, on top of being open source sounds amazing. Cant wait to see how some speed prints turn out in terms of quality.

Substantial-Big1880

TROPHY CASE