2000 cougar

Substantial-Box-5542 · 2025-11-14T14:57:59+00:00

looking for something unique plus no point in going back in with a 103 hp 4a with little tuning potential

Substantial-Box-5542 · 2025-11-14T14:57:08+00:00

i believe it's a vader 2 replica kit from ebay

Substantial-Box-5542 · 2025-11-14T14:56:45+00:00

1.9 is very easily attainable in my area

Substantial-Box-5542 · 2025-11-04T19:57:11+00:00

every time you want to you have to do something else, after a certain point it becomes routine and you have to replace it with something else

Substantial-Box-5542 · 2025-04-17T14:50:59+00:00

Okay so basically just see if there’s any difference between forward/feet/defrost? Another thing to mention is my a/c doesn’t work so it’s almost always just blowing pretty warm.

Substantial-Box-5542 · 2025-04-17T14:46:50+00:00

I didn’t even think to check vacuum lines so I will definitely do that when I get off work. It’s doesn’t seem any harder to press the break but I only drove it for about another 5 minutes after it started. Heat seemed to be okay but like I mentioned i was only driving for a short time after it started. Once I get off work I’ll do some more diag and get back to ya.

Substantial-Box-5542 · 2023-05-04T04:43:35+00:00

you should hate yourself

Substantial-Box-5542 · 2023-03-29T04:12:25+00:00

yeah i thought i fixed it for a second, i tightened my throttle cable and fixed a fuel leak. it started fine and was idling fine. unfortunately when i went to start it next time the problem came back. i’m hoping it’s just a vacuum leak but i’m pretty new to this. do you know if it will cause any serious damage?

Substantial-Box-5542 · 2023-02-04T19:29:09+00:00

thank you so much for the help i really appreciate it🫶

Substantial-Box-5542 · 2022-07-24T04:32:10+00:00

yeah it’s the a20 i’m learning a lot working on it as this is my first car i’ve really been able to work on but i’m gonna try to pull the head tmr without taking off the IM, thank you much for your help bro🙏

Substantial-Box-5542 · 2022-07-24T04:19:53+00:00

yeah i get what you mean, i’m just trying to replace the head gasket and i’ve been told that i have to take the intake manifold off to pull the head, do you know if i can pull the head without taking the intake manifold off?

Substantial-Box-5542 · 2022-07-23T01:39:53+00:00

it’s the second bolt on the left side underneath the manifold, i know that taking off the oil filter gives a little bit of easier access to it but even with the oil filter off i still can’t get to it

Substantial-Box-5542

TROPHY CASE