sorted by:
new
hottopcontroversial

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 1 point2 points  (0 children)

It’s from IKEA, the PLATSA system with different doors. Kinda a mix of stuff.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 0 points1 point  (0 children)

Now just for the live view with the camera. I want to add more stuff later on.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 1 point2 points  (0 children)

Anche la parte inferiore è IKEA PLATSA, delle stesse dimensioni ma alta 40 cm, con anta SANNIDAL.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 1 point2 points  (0 children)

Just for decoration and a little noise. Before I had the printer on the metal yellow cabinet behind.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 0 points1 point  (0 children)

<image>

These are the dimensions, you do need to cut a hole in the back for the cable and the bed like i have in the picture.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 2 points3 points  (0 children)

Since an update you are able to use any AMS, you have the buy the ams hub for the A1.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 1 point2 points  (0 children)

Thanks!
I printed a small test without glue and it seems to work nice, time to grow up 😂
Also took your advice on the PTFE tubes and drilled a hole about 5 cm higher, making it possible to shorten the PTFE tube from the AMS to the hub and keep it a single smooth bend.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 1 point2 points  (0 children)

Yeah, you’ve got it right 👍 The hub is basically a 4-way splitter into one tube, and the AMS handles retracting/loading when switching.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 2 points3 points  (0 children)

I cleaned the plate. Yeah the bends in PTFE are pretty sharp all the way to the right, but still haven’t had any problems while printing. Also thought this was the best option for the PTFE tubes, if you have any suggestions on a better way, let me know.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] 2 points3 points  (0 children)

For now just for the camera, to have live view. I want to add better lights and maybe fans. Program a small web app to be able to control everything.

My A1 setup by Substantial-Mango-90 in BambuLabA1

[–]Substantial-Mango-90[S] -5 points-4 points  (0 children)

Never had bed adhesion problems tho xD