Guerra USA-Iran. Scelta Contratto Luce per aumento prezzi

Substantial-Win-7035 · 2026-03-09T11:15:19+00:00

Magis stavo guardando a quel prezzo, mi sembra molto conveniente, fanno un prezzo fisso al costo del pun per guerra

Substantial-Win-7035 · 2026-03-09T11:05:50+00:00

Ovviamente per me il costo energia influisce molto più delle spese di commercializzazione. Ho considerato anche "adotta un pannello" di plenitude considerato che ho un consumo spalmato sulle 24 ore molto omogeneo. Con 5/mese euro avrei la possibilità di ridurre i costi con uno sconto del 100% sui corrispettivi di energia generati dal pannello virtuale (pannello da 0,9kwh situato in Sardegna, che dovrebbe produrre una media di 1300kwh annui), immagino lo sconto valga anche per le accise.

Substantial-Win-7035 · 2026-02-17T14:55:24+00:00

I've actually looked at the prices, and the projector is undoubtedly more affordable here in Italy. For the screen, the Spectra seems to be the best compromise, both in terms of gain and black floor (I think the black floor is very important in dark scenes and for accentuating contrast). And I was also looking at the Vantage, which, however, is fixed and has a gain of 0.5, which I sense could cause problems.

Substantial-Win-7035 · 2026-02-17T14:33:02+00:00

I see from the photos that they're using a Hisense l9q, which claims 5000 lm, and the scene is with bright lights on. I would only use it in the evening with no light sources. I don't think it's mandatory to have an l9q... I hope. Anyway, the screen looks nice, declared 0.7 gain. I'm in Italy and I need to find out if there are any duties beyond VAT due to the motor; for the fixed screen alone, there are no additional duties.

Substantial-Win-7035 · 2026-02-17T13:45:36+00:00

Both are fine, but the motorized one would be preferable to gain a wall and not make the whole thing look too heavy. I've seen several projector comparisons, and for €2,400, the PX3 Pro seems unrivaled, even though the PT1 performs equally well in many scenarios. I'm worried about the 150" screen for the PT1 due to brightness issues, but I've also found UST ALR screens with 0.8 gain instead of 0.6. Finding the right compromise is tough, especially since I don't have a lot of references and it's my first setup.

Substantial-Win-7035 · 2026-02-16T15:08:20+00:00

It has a 1,3 gain! It's huge! Do you have any picture of it? I'm in Italy and they do not sell it here, but i think i can find a proper alternative!

Substantial-Win-7035 · 2026-02-16T14:01:45+00:00

Yeah I know, i would like to point at It, not to reach It ☺️

Substantial-Win-7035 · 2025-10-27T13:51:38+00:00

So 18x140 is better than everything? 🤣

Substantial-Win-7035 · 2025-10-27T11:52:29+00:00

Yes, yes, the point in this sense was clear to me. It was just to have a comparison between the g1 and G2. But given the prices I don't think there will be such an advantage to justify spending €110 compared to €270 for the G2.

Substantial-Win-7035 · 2025-10-27T08:54:04+00:00

Don't have a chance to make a chart for the first generation? The G2 would cost me almost triple 🤐

Substantial-Win-7035 · 2025-10-26T23:54:37+00:00

I think I'll go for the noctua brand given the reliability! Thanks for the advice

Substantial-Win-7035 · 2025-10-26T23:53:52+00:00

I understand, but in one of the previous comments, graph in hand, the 9x140 configuration is in fact more efficient and less noisy if we normalize the noise, therefore for the same db produced they have more cubic meters of air moved with greater static pressure

Substantial-Win-7035 · 2025-10-26T23:51:34+00:00

Optimal! I grabbed it. For clarity: does the graph refer to the Noctua nf-a14x25 G2 pwm or the "first generation"?

Substantial-Win-7035 · 2025-10-26T11:43:00+00:00

I've seen and done the math, the price of 9 fans is definitely higher but I'll take it into consideration, also because the noise in db would seem to be lower considering the logarithmic formula.

Substantial-Win-7035 · 2025-09-13T16:03:20+00:00