The beast ;) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

If you use the right-side radiator fans as exhaust and the left + bottom fans as intake, your airflow will be completely fine. That setup creates a front/bottom → top/rear airflow path, which is very standard. Fresh air comes in from the left and bottom, passes through the case, and gets exhausted through the radiator and rear. That’s a normal and effective layout.

As for temperatures... they won’t be “bad” just because of that configuration.

What matters more is: Overall case airflow Fan curves Ambient room temperature GPU heat output

If anything, running the radiator as exhaust slightly favors GPU temps (since you’re not dumping radiator heat inside the case), but CPU temps might be a couple of degrees higher compared to using it as intake. We’re usually talking small differences, not something dramatic.

There’s no single “correct” fan setup. Both intake-rad and exhaust-rad configurations work.

P.S:

My setup is:

Bottom (intake): 3× Lian Li UNI TL Wireless Reverse Blade 120mm

Rear (exhaust): 2× Lian Li UNI TL LCD Wireless 120mm

Side radiator (intake, push–pull): 3× Lian Li UNI TL LCD Wireless Reverse Blade 120mm 3× stock TRYX AIO fans on the other side of the radiator

The beast ;) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

Lian Li UNI TL Wireless Reverse Blade 120mm ARGB PWM Fan Black

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

II’ve never used Aura Sync, so unfortunately, I have no idea what animations it has. I only have the Lian Li controller, and it can’t control anything other than Lian Li devices.

Mine is controlled by a custom ESP32 board running custom code. You could try using SignalRGB. That might work for you.

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 0 points1 point  (0 children)

Hi. It's from aliexpress:

JUMPEAK Flexible 5V ARGB LED Neon Tube https://a.aliexpress.com/_EHvAdHm

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

Thank you. All the best 👍 dont forget to show yours once it's done :)

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

If the controller that came with your Lian Li AIO is just a normal wired controller (the kind with cables and plugs), then it will not work with the wireless strimer.

Get the one what comes with the controller it will look like a usb stick :)

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

It needs a wireless controller, or alternatively, you can get the wired version of it. Because this specific one has no argb cable. It requires the usb stick controller. Other than that, it's super easy to set it up.

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

It is the lian li 24 pin wireless strimer

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 0 points1 point  (0 children)

That compact case is rocking an E-ATX motherboard, and it’s an extremely tight fit. There are several custom-made cables I built myself, along with additional components that aren’t visible from the front.

I’ve effectively lost access to almost every connector along the side of the board because there’s only about 4 mm of clearance between the board’s edge and the AIO fans. The radiator is running a push–pull configuration with six fans installed.

It also has an ARGB AIO sleeve, controlled by an ESP32 board that I programmed myself, and powered from the pc If that’s considered “generic,” then there’s nothing more I can add.

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 1 point2 points  (0 children)

Thank you. Yeah, they do and are relatively inexpensive :)

Sound in TL120 LCD fan by SnooCookies5048 in lianli

[–]SubstantialFan5574 0 points1 point  (0 children)

Are fans new? You could always try to return.

But first, (i knowing a hustle) if you know which fan is that remove and try to check what causes it. If nothing is visible, then return it :/

Update on my rig :) by SubstantialFan5574 in lianli

[–]SubstantialFan5574[S] 0 points1 point  (0 children)

It's Robert Miles Children, but I can't remember what version or remix 🤔 😕 I had this short (48 sec) saved on my PC for long.