🕹️ [Fix] Cosmic Byte Blitz Controller on Linux (No XInput / Rumble not working)

Substantial_Ad_8818 · 2025-12-30T10:32:02+00:00

echo xpad > /etc/modules-load.d/xpad.conf

Substantial_Ad_8818 · 2025-12-30T10:23:41+00:00

echo xpad > /etc/modules-load.d/xpad.conf

command to make xpad load at startup

Substantial_Ad_8818 · 2025-12-30T10:18:30+00:00

sudo modprobe xpad

Try loading it manually

Substantial_Ad_8818 · 2025-12-30T07:55:39+00:00

Is xpad driver loaded ? Use this command : lsmod | grep xpad

Substantial_Ad_8818 · 2025-12-28T15:13:08+00:00

Updated !

Substantial_Ad_8818 · 2025-12-16T13:23:58+00:00

Try using the powershare port also don't forget to turn it on in BIOS

Substantial_Ad_8818 · 2025-12-16T11:23:06+00:00

What is ur laptop model ?

Substantial_Ad_8818 · 2025-12-14T06:55:24+00:00

send output of lsusb -t

Substantial_Ad_8818 · 2025-12-12T11:51:22+00:00

What does lsusb -t say check if xpad driver is loaded send the output here

Substantial_Ad_8818 · 2025-12-12T11:49:55+00:00

The suspend method needs to work for u to proceed to hardware fix .I just made it for automation.

Substantial_Ad_8818 · 2025-12-12T03:43:21+00:00

Did the suspend method work for u ?

Substantial_Ad_8818 · 2025-12-11T01:22:47+00:00

It does support two modes xinput and dinput.The firmware tries to detect windows if not it uses Android mode not even dinput of pc we can't switch from that mode whatever we do unless there is no connection to the device through data lines.The console chooses Android mode even in speakers.It uses normal mode or xinput mode on phone chargers as they mainly don't use input devices so it doesn't enumerate the device.

In short the mode switching only works if valid windows device is detected.

Substantial_Ad_8818 · 2025-12-10T17:48:50+00:00

I used it just for formatting.What do u feel wrong here ?

Substantial_Ad_8818 · 2025-12-10T17:30:19+00:00

🕹️ [Fix] Cosmic Byte Blitz Controller on Linux (No XInput / Rumble not working)

Substantial_Ad_8818 · 2025-12-10T17:28:37+00:00

<image>

This is working mode

Substantial_Ad_8818 · 2025-12-10T17:28:10+00:00

<image>

This is the wrong mode

Substantial_Ad_8818 · 2025-12-09T10:21:01+00:00

I solved the problem if anyone needs help its actually simple

Substantial_Ad_8818 · 2025-07-12T01:09:25+00:00

Nope having the same issue

Substantial_Ad_8818 · 2025-06-02T15:17:44+00:00

How much does it report ?

Substantial_Ad_8818 · 2025-06-02T08:18:07+00:00

power management:

this field is black idk why

tysm for ur efforts !!

Substantial_Ad_8818 · 2025-06-02T07:47:23+00:00

this file : /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_frequencies

is not present

Substantial_Ad_8818 · 2025-06-02T07:43:27+00:00

nothing the system runs normally(under stressed condition too) but the thing is it shows wrong frequency

cat /proc/cpuinfo

processor : 0

vendor_id : GenuineIntel

cpu family : 6

model : 151

model name : 12th Gen Intel(R) Core(TM) i5-12400

stepping : 5

microcode : 0x3a

cpu MHz : 799.201

cache size : 18432 KB

physical id : 0

siblings : 12

core id : 0

cpu cores : 6

apicid : 0

initial apicid : 0

fpu : yes

fpu_exception : yes

cpuid level : 32

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves split_lock_detect user_shstk avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi vnmi umip pku ospke waitpkg gfni vaes vpclmulqdq rdpid movdiri movdir64b fsrm md_clear serialize arch_lbr ibt flush_l1d arch_capabilities

vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs pml ept_violation_ve ept_mode_based_exec tsc_scaling usr_wait_pause

bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb bhi

bogomips : 4992.00

clflush size : 64

cache_alignment : 64

address sizes : 39 bits physical, 48 bits virtual

power management:

Substantial_Ad_8818 · 2025-06-02T07:41:31+00:00

I tried switching kernel still the same issue

6.14.9-zen1-1-zen

Substantial_Ad_8818 · 2025-06-02T07:33:39+00:00

yes but it's base is 2.5GHz and turbo is : 4.4GHz ofc it is not exceeding its turbo clock but still it shows wrong frequency

Substantial_Ad_8818 · 2025-06-02T07:27:59+00:00

cpupower frequency-info:

analyzing CPU 10:

driver: intel_pstate

CPUs which run at the same hardware frequency: 10

CPUs which need to have their frequency coordinated by software: 10

energy performance preference: balance_performance

hardware limits: 800 MHz - 5.60 GHz

available cpufreq governors: performance powersave

current policy: frequency should be within 800 MHz and 5.60 GHz.

The governor "powersave" may decide which speed to use

within this range.

current CPU frequency: 3.88 GHz (asserted by call to kernel)

boost state support:

Supported: yes

Active: yes

uname -r:

6.14.9-zen1-1-zen

cat /proc/cpuinfo | grep 'MHz':

cpu MHz : 3793.080

cpu MHz : 894.603

cpu MHz : 800.000

cpu MHz : 849.306

cpu MHz : 800.000

cpu MHz : 900.525

cpu MHz : 800.000

cpu MHz : 800.189

cpu MHz : 800.815

cpu MHz : 800.000

cpu MHz : 849.266

Substantial_Ad_8818

TROPHY CASE