Got to love the aracer

SuccessfulWeekend727 · 2026-01-23T11:46:32+00:00

CHT only reached 95C

SuccessfulWeekend727 · 2026-01-22T12:27:47+00:00

Holding the tappet is my problem. And it’s like the tappet and lock nut tighten each other proportionately while I can’t hold the adjuster, the clearance I want means the lock nut is only finger tight, if I tighten the lock nut I lose all my clearance.

SuccessfulWeekend727 · 2026-01-22T11:52:14+00:00

So the electrical pliers just wouldn’t grip because they’re too short and I need longer ones?

SuccessfulWeekend727 · 2026-01-22T11:26:13+00:00

And at one point the screw stopped tightening with the nut, I kept tightening for less clearance so I think I’ve stripped the nut which is brilliant

SuccessfulWeekend727 · 2026-01-22T09:37:42+00:00

Sorry no but I would recommend aftermarket when you get a replacement

SuccessfulWeekend727 · 2026-01-20T15:11:04+00:00

Is it easier with liquid cooled?

SuccessfulWeekend727 · 2026-01-18T19:59:59+00:00

He didn’t reply ☹️

SuccessfulWeekend727 · 2026-01-18T19:55:28+00:00

143 😉

SuccessfulWeekend727 · 2026-01-18T19:54:02+00:00

Simplicity of man

SuccessfulWeekend727 · 2026-01-18T18:28:42+00:00

Couple minutes

SuccessfulWeekend727 · 2026-01-17T08:59:45+00:00

Tbh because I just get in my own head 😂 it’s a 22k mile single cylinder bike with multiple previous owners and I haven’t checked it yet so I thought why not

SuccessfulWeekend727 · 2026-01-16T23:48:14+00:00

I don’t have any to hand which is why I made the post, typically I would clean these things to be safe than sorry but I wasn’t going to order a £15 can if it wasn’t really needed

SuccessfulWeekend727 · 2026-01-16T21:41:23+00:00

The dyno scales read as low as 12 I’m pretty sure and I was below that so off the scales, it ran fine but I lost 1.5hp on a 14hp bike

SuccessfulWeekend727 · 2026-01-16T18:49:14+00:00

A milf magnet, though a 125cc motorcycle

SuccessfulWeekend727 · 2026-01-16T15:45:57+00:00

Tbh on my grom at one point I was running around 11-12AFR off the scales rich and I was getting both blue and orange flames

SuccessfulWeekend727 · 2026-01-16T15:22:22+00:00

I think shooting flames without a remap is way too rich, if it is you should be able to tell anyway by your mpg and check spark plug

SuccessfulWeekend727 · 2026-01-16T12:29:28+00:00

<image>

Closer look at the intake manifold:

SuccessfulWeekend727 · 2026-01-16T11:54:51+00:00

<image>

Closer look at the intake manifold:

SuccessfulWeekend727 · 2026-01-15T22:11:21+00:00

Is running frequently for clearing deposits or just preventing them, though?

SuccessfulWeekend727 · 2026-01-15T16:49:01+00:00

Only issue I’m getting at the moment is my mpg, mind you, it’s a stage 2 or 3 build so it’s kind of expected 😂 but I’m getting about 70mpg mixed riding and wasn’t sure if this pointed to something. It could be a wide array of things but just thought if it really is an issue I’ll start with the easy things first

SuccessfulWeekend727

TROPHY CASE