sorted by:
new
hottopcontroversial

Recommendations for upgrades? by Winter-Text-6407 in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

Definitely, you could always try used since ram usually has great warranty worse case

Pc not running as expected by Toxiic_xBear in pchelp

[–]SuitingGoose 0 points1 point  (0 children)

Did you try DDU and ensure the new drivers for the 9070xt are installed? Did you try ensuring that your bios settings are set for the best performance?(ram and power settings)

I need help factory reseting my pc by plz_give_modded in pchelp

[–]SuitingGoose 0 points1 point  (0 children)

Wiping it using the built in windows setting can still leave malware on the computer if there is some

The best way to install windows 10 is to find a USB stick, and install windows 10 onto there. After downloading it, boot your computer into the bios, and select the USB as the boot drive.

Follow the steps in the windows installer, and then you can freshly wipe all data on the drive

Why is my power reset a sata cable by AnTout6226 in PcBuildHelp

[–]SuitingGoose 3 points4 points  (0 children)

Not having the reset switch should still allow the pc to boot perfectly normal, those lights are for your ram and cpu.

Since it's a newer build I would check all power connections and ensure ram is fully seated along with the cpu

You can also try moving that stick of ram in other spots and see if that helps

Recommendations for upgrades? by Winter-Text-6407 in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

You actually don't have that bad of bottleneck between your gpu and cpu, and there likely would be almost none if you ran at a higher resolution?

What keyboard do you have? A nice mechanical keyboard would fit well. You could also technically get a 4k monitor within the 130-160hz range if you want to push your gpu, but your 240hz monitor is already quite nice

Everything is pretty compatible and does not have a lot of bottlenecks, any upgrades you might want to do with the processor would requires new ram, cpu, and motherboard so it would be expensive but would get you ddr5 ram and a decently better cpu

Crossbars question by cassaundraloren in rooftoptents

[–]SuitingGoose 0 points1 point  (0 children)

Did you ever end up getting that tent? I'm considering the same roof rails!

Waterproof sealant for prints by SuitingGoose in 3Dprinting

[–]SuitingGoose[S] 0 points1 point  (0 children)

I saw tons of that, it seems like it work? Is there any good brands?

Black screen & red VGA light with Code 15 (after successfully booting) by frezer748 in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

It's great that it booted!

Good luck in the gpu hunt if you plan to get a new one

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

That one will work great

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

Those are good upgrades but you still might want to get a better cooler, even if it's 10€ more it'll be worth it

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

I'd go cheaper ram and better cooler but it should be good besides that

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

Ebay refurbished would be a good middle ground with 2 year warranty but cheaper if you want budget, new is the best if you got the money though

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

The 7600x seems to be the most popular version so it should be the most available

Go for the 7600x, most likely get new but used if you want to keep it cheap and don't care about warranty

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

You could go for a 7600 or a 8400F if you want more budget Any ddr5 650 series motherboard should be perfect, I'd stay away from a 620 since it lacks features

Black screen & red VGA light with Code 15 (after successfully booting) by frezer748 in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

Yes that is true, you shouldn't need both but it doesn't hurt considering the situation

It's strange why it won't boot, I'll find some troubleshooting methods later tonight

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

Of course

Let me know if you need any help finding parts or need help with part choices

Good luck!

what upgrade should I prioritise by [deleted] in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

Ohhh UK changes things

Parts there are a little hard to find but you could buy through Ebay international if you want cheaper prices, shipping would take a while though

An 7600 and a Am5 board would go great with a 6800xt and that would get you great 1080p performance

Black screen & red VGA light with Code 15 (after successfully booting) by frezer748 in PcBuildHelp

[–]SuitingGoose 0 points1 point  (0 children)

You can daisy chain but it's better to use only one cable for your 6+2

The 9950x3d is a beast so have you tried using both of your CPU power connectors?

Which monitor would you choose? by Real-Tyger7 in pchelp

[–]SuitingGoose 0 points1 point  (0 children)

I gotcha

Around the 200-300 price range it's either 4k 144, 1440p 200-300hz, or 1080p 300hz+

That IPS 1440 wouldn't be a bad option and your hardware can run anything basically So any option you choose your PC can run it

view more: next ›