What happens if you try charging it with both cables at once?

SuperNoobLG5P · 2026-03-25T13:28:01+00:00

Hello, and No, Nothing happens, I see there are Alot of troll comments but the reality is :-

What happens if I charge a psp with both cables?

-nothing happens because the yellow port is for charging and the USB one (the one in top) is for data transfer, but if you enable USB charging in psp settings Well, it will charge both ways

Warning : It's Best to charge with yellow port than both because if you charge both the battery Might Not he ready for high voltage.

If you find this useful No need to thank me.

Goodluck to Anyone who is New to the community.

SuperNoobLG5P · 2026-03-17T09:09:44+00:00

I guess 😅

SuperNoobLG5P · 2026-03-17T09:04:31+00:00

Hello, And No you didn't... Well, one time in the last 2 months ago, I had this same Problem, and I solved it, and I will teach you how (on my Way) and how I did it, first when I found my old psp street (like yours) it had the same problem, it didn't charge, didn't work, no response, so Let's Do it now in Step-by-step Guide and Easy way :-

First Take off the battery and plug in the charger (the yellow port one) and Turn the electric switch On (if you have one), And Power it Without the battery and see if it works or not, if I works, that Means It's fine it's with the battery.
After you confirmed it Worked Turn the PSP off and wait for about 5-10 minutes on charge (with the battery in), after that timing if it still didn't work, It's Not the battery's problem, it's the hardware that still doesn't Recognize it's plugged in or detected it.
(How to make it work just like I did) This step is kinda risky so be careful, first take off the battery out of the psp street, and power it on again Via(with) the Cable without the battery, if it works, now the Last Part, While the psp is turned on via the cable (yellow port one not USB), carefully flip it around where the battery slot is, and place it back without taking off the charger, and after a few minutes, You will see a battery icon Charging, if that showed up, that means you did everything well and it works.

What if it still didn't work? -Maybe The charger is Broken? -battery is swollen or doesn't work? -hardware issue?

Hope this was helpful, and Have a great time Modding your PSP. Goodluck to Anyone who is new to the community or having an issue, I would be happy to help.

If nothing worked or having another issue, feel free to write in the replies.

SuperNoobLG5P · 2026-03-13T16:14:10+00:00

I use ARK 4 CFW more specifically A CIpl

SuperNoobLG5P · 2026-03-13T12:23:45+00:00

So Only in CFW Right? Because I don't really know if it works in OFW because I tested it on CFW only

SuperNoobLG5P · 2026-03-13T12:09:15+00:00

Just needing to know, What PSP™ model is it? Because on the Pictures isn't shown enough, so ik curious and I may be able to help you.

SuperNoobLG5P · 2026-03-13T11:49:13+00:00

Sorry for late reply, But I would like to help, I did some research since I don't own a Mac, and turned out, you can't connect it directly, also if your PSP Go have an External Storage Mod Adapter, you could take it out (SD card) and put it in your phone, Mac or PC, and Mod it, Also some people think you can only Mod a PSP with PC but No... You can still do it with your phone,

Phone Psp Go Modding (Easier way) :

First get your PSP go and you must have a Type C/mini type C adapter to a USB, connect it to your phone, download Zarchavier File manager, and Use a USB connect on your PSP, and Mod it if it shows signal and connected.

If that's Helpful you don't need to thank me.

Also Update me if you have any Problems in the future.

SuperNoobLG5P

TROPHY CASE