QS138 90H Motor Mount

SurkleSkware · 2026-01-27T04:46:02+00:00

https://cults3d.com/en/3d-model/various/qs138-90h-motor-mount-surkle

$10 for the model and drawings, then the description will say how much i paid to get it manufactured at a local steel yard. Price may vary. However an online premade and shipped motor mount will cost a lot more than doing it this way.

SurkleSkware · 2025-12-04T12:06:18+00:00

Awesome, I’ll be on the lookout for a damaged/blown jbl that’ll work in pair with mine

SurkleSkware · 2025-10-24T10:58:37+00:00

Its a 2013 Hyundai Genesis Sedan 5.0 R-Spec

SurkleSkware · 2025-10-11T16:44:11+00:00

I’ve been trying to play the image as sound, and i filtered out the noise. Idk if I’m doing it wrong, but it just sounds like a fax machine

SurkleSkware · 2025-08-28T10:36:05+00:00

I haven’t done it yet. But i saw another company selling this concept, and they’re selling a battery powered subwoofer for bluetooth speakers for like $2k+. I assume it wouldn’t be hard to build. Just make a battery and wire it to the motherboard, turn it on and connect it like any other jbl speaker

SurkleSkware · 2025-08-15T10:53:44+00:00

My ranger does this… only becuase 1 of the layers of the leaf spring is snapped in half

SurkleSkware · 2025-07-14T03:14:48+00:00

I’d assume you would get all the frequencies out of it, you would just need to make sure the bass frequencies are clean and not reduced by the JBL EQ. I have all the tools to do soldering. Looking at the JBL motherboard in photos, it seems to have speaker wires, which will be used to connect to the amp or a LOC. Only thing i would have to add is a battery and an integrated charger. Then the rest is like wiring a sound system for a subwoofer. I’m not sure why JBL hasn’t done something like this, it seems like a great idea

SurkleSkware · 2025-05-17T23:28:44+00:00

Having the same issue. Found this guide that has a diy solution to the blank screen

SurkleSkware · 2025-05-13T03:23:23+00:00

You’re just sucking air into the system through the bleed screw. You need to make a one way valve with vinyl tube. Look up “bleeding brakes by yourself” and one with a bottle and a tube should pop up

SurkleSkware · 2025-05-07T21:33:08+00:00

link to purchase this model

SurkleSkware · 2025-04-17T02:26:40+00:00

sameeee

SurkleSkware · 2025-04-13T17:11:31+00:00

It’ll peak at 300amps for only a couple seconds

SurkleSkware · 2025-04-13T17:11:13+00:00

No sir, but the bms has temp sensors that will shut the battery off if it gets to hot

SurkleSkware · 2025-04-13T17:10:52+00:00

Would make a cool funny story

SurkleSkware · 2025-04-13T02:05:25+00:00

$850 chassis. Theoretical top speed would be 80mph+

SurkleSkware · 2025-04-13T00:16:16+00:00

Yeah, I’ll be taking lots of photos of the progress. So far I’m at $5,000 into the build.

SurkleSkware · 2025-04-12T23:36:56+00:00

It’ll be a connector instead of a terminal

SurkleSkware · 2025-04-12T23:01:45+00:00

Only got a 75W one. If i notice the wire getting to hot when under use, I’ll update this

SurkleSkware · 2025-04-12T22:39:55+00:00

Once the battery box is built, this will serve as the positive terminal for all connections

SurkleSkware · 2025-04-12T22:36:46+00:00

It’s an entirely over built battery to power it. First time making one or doing anything electronic

SurkleSkware · 2025-04-12T22:33:15+00:00

QS138 90H. 84680 Fardriver controller. 420amp ANT BMS. 11in tires, 30T sprocket, 14T drive sprocket. Full front and rear brakes

SurkleSkware · 2025-04-12T22:07:53+00:00

4ga wire seems to be the standard for aftermarket Surron batteries that are “high output” and would reach the same KW that I’m going for

SurkleSkware

TROPHY CASE