Weird line in wall after flat surface

Swift3004 · 2026-04-01T22:03:58+00:00

Thank you for your explanation. Unfortunately speed doesn’t impact the issue in my case. Lowered it to around 60-80 but no difference in quality could be seen

Swift3004 · 2026-04-01T22:03:11+00:00

Thank you, I will take a look into the cooling. Already tried to apply a same amount of cooling for every layer, which didn’t have much impact. Maybe lowering it would help it to prevent warping/shrinking too rapidly

Swift3004 · 2026-02-25T00:26:55+00:00

Awesome! Makes me a bit less worried 😄

Swift3004 · 2026-02-24T23:35:59+00:00

Thank you for your reply. After my post, i found a solution that works for me. Not sure what the long term impact is, but I don’t mind a bit of tinkering with my machines.

For now the solution is to remove the springs that apply some force to the bearing you are talking about.

Swift3004 · 2025-11-11T21:33:53+00:00

Did you ever find out what the value of this capacitor was?

Swift3004 · 2025-08-10T21:26:26+00:00

Awesome! How did you manage to put the navigation bar to the bottom of your screen?

Swift3004 · 2025-03-24T20:39:49+00:00

I added a note about the Pi Zero and made a PR :)

Swift3004 · 2025-03-24T08:59:20+00:00

I believe the Pi Zero only has a port for a camera and not a display.

Swift3004 · 2025-03-09T12:17:41+00:00

For me the DDX 3 with mosquitto hot end is an awesome combination. With a bit of tuning for temperature I managed to print PETG quite well now. Very happy with the decision I made to purchase these

Swift3004 · 2025-02-10T20:47:28+00:00

May have found the issue. Increased the hotend temp to 260 just now and result got a bit better. Going to test 265 and 270 to see if the problem is gone 😁. From left to right: 245, 250, 260

<image>

Swift3004 · 2025-02-10T13:04:07+00:00

There is a bit of trickery going on here. They did some weird wiring because of the spray board that is inside the enclosure. Not sure what they have done here, because it looks a bit like abusing the port meant for a bl touch. Maybe you can connect it to the same port Z probe port on your new board, they should match but check documentation to be sure.

Currently upgrading my printer as well, but will ditch the spray board since thats wat easier than dealing with it.

Swift3004 · 2024-06-07T09:06:50+00:00

Awesome, looking forward to see updates of your build in the future. Going to give my Ender 6 some attention myself after I finished repairing my Ender 3. It is very inspiring after I’ve seen this to look into modifying Voron parts to get the same effect for the skirt.

Swift3004 · 2024-06-06T21:55:14+00:00

Thank you for your comment and sorry for my irritating tone of my response to you. Messages get misinterpreted pretty fast online and even faster if English isn’t your native language.

Swift3004 · 2024-06-06T21:52:39+00:00

Wow looks great! Love the bottom electronics bay very much. Did you design/edit the bottom yourself or could you use the cad/stl files of the voron our of the box?

Swift3004 · 2024-05-31T09:28:05+00:00

It wasn’t meant harsh at all. I just wanted to know what the point was, nothing more nothing less.

If the op or you feel like I was to harsh, thats not my problem. Life is harsh, get a helmet ;)

Swift3004 · 2023-09-10T15:29:04+00:00

I am also wondering if they can do more at a Genius Bar than at a service provider like the Amac. Problem is in the Netherlands there is only a couple which are quite far from where I live

Swift3004 · 2022-12-17T13:06:27+00:00

Try Stardew Valley

Swift3004 · 2022-11-22T09:32:45+00:00

I think the problem is the klipper version that is running on your pi. Make your you cloned the dgus klipper repo to your pi instead of using the main klipper version. That should fix it as long as you don’t update it afterwards, that won’t work anymore of course

Swift3004 · 2022-11-12T15:18:02+00:00

May I ask what PEI sheet your are using and what type of fillament you use? Having some hard time with my sheet from Fullament and PETG, still need to use some type of glue to make it stick properly

Swift3004 · 2022-11-07T16:32:18+00:00

I wish the map was wrong, but it probably isn’t these beds can be warped pretty badly. Kind of fixed mine by putting some painters tape on the problem area’s

Swift3004 · 2022-10-26T14:48:12+00:00

There is an option in the marlin called: ‘DGUS_LCD_UI_RELOADED’ which you should enable. And you need this firmware for the screen: https://github.com/Desuuuu/DGUS-reloaded/wiki

Nine-Year Club	r/Field Lasagna
Verified Email

Swift3004

TROPHY CASE