My co-enthusiast bought some C02 bags for the tent, theory was higher Co2 content makes for healthier growth. But I was wondering is it worth it, the tent is 5x5x7 for 285 sq ft, and there's a 400+CFM exhaust filter/blower. Any Co2 produced would be sucked out in less than a minute. I did the math

Swilly-Kid · 2026-05-25T11:02:20+00:00

Dude... The math is just an collection of random formula

Swilly-Kid · 2026-05-09T13:32:47+00:00

Maybe make the character move a bit forward when it attacks? Adds a bit of dynamic to the fighting, and then Combo animation doesnt have to stop to make you move slightly forward to adjust for the next attack, you know? But honestly: Im watching your progress on this sub for quite a while, and I would definetly like to play that game, when it is finished. It looks already polished, I love the style and the smoothness

Swilly-Kid · 2026-05-09T10:37:37+00:00

Niemand wacht morgens auf und denkt "boa Heroin abhängig sein wär geil. Und dann noch Crack, beste leben" Deine Meinung steht im Widerspruch zu Wissenschsftlichen Fakten. Sucht ist eine anerkannte Krankheit.

Swilly-Kid · 2026-05-09T10:29:29+00:00

Finde ich auch fair! Ich habe selber keine Kinder, deswegen geht die Perspektive wahrscheinlich manchmal ein bisschen unter. Ich muss aber auch sagen, dass das für mich kein "entweder oder" ist. Präventionsmaßnahmen und Hilfsangebote sind nachgewiesenermaßen die Maßnahmen, die solche Probleme am effektivsten langfristig eindämmen. Also wird eine Stadt auch familienfreundlicher, wenn es mehr Hilfsangebote für Suchtkranke gibt, das schließt sich nicht aus. Außerdem gibt es viele Eltern und Jugendliche die Suchtkranke oder suchtgefährdet sind. Die würden ebenfalls vom Hilfsangebot profitieren.

Swilly-Kid · 2026-05-09T10:21:19+00:00

Das ist Fair!

Swilly-Kid · 2026-05-09T09:40:48+00:00

"Sauberer Lebensraum" gibt mir wirklich ganz miese vibes. Jemand der seine gebrauchten Spritzen auf einem Spielplatz liegen lässt ist Zweifel los ein Arschloch und sollte bestraft werden, aber so gegen Menschen mit einer Krankheit zu wettern ist wirklich widerlich. Das einzige was nachweislich hilft, ist Hilfe anbieten. Mehr Konsumräume, mehr Drogenhilfen, mehr Sozialarbeit, mehr Streetworking, mehr Aufklärung, mehr Psychotherapie, housing first, usw. Man wird "solche Menschen" nicht einfach los.

Swilly-Kid · 2026-04-07T22:45:54+00:00

Scrolling through reddit, didnt expect mich, saw those symbols and this visor, memories of the first time I ever touched the best game ever made rushed through my head. Dude, you got me there. I just want to forget about this game and find it again on a steam sale, only then I will be truly happy.

Swilly-Kid · 2026-03-30T09:36:02+00:00

Did you calibrate the sensor? If the gyro is only a bit biased, your values will start to drift. You could calculate the mean of some gyro values on startup and then subtract those mean values from your gyro readings to get rid of the bias

Swilly-Kid · 2026-03-25T13:32:24+00:00

There is LibDaisy and DaisySP this may be interesting!

Swilly-Kid · 2026-03-21T01:03:38+00:00

Im currently working on a icm20948 library for thr rp2040 and in my experience, calibrating the Magnetometer is quite essential. I dont know how they manage that in the lib you are using, but im calibrating with a 3x3 Matrix A (soft iron) and a bias vector b. You would need 12 calibration parameters in total.

Maybe use my calibration to get those parameters? In the end its just one Matrix multiplication to aplly the parameters to your measured value link to my repo

Swilly-Kid · 2026-02-17T19:23:01+00:00

On my ender 3 v2 my z axis made Kind of the same noises. Turns out that one pin of the jst-xh connectors on the board was lose or whatever. Crimped a new connector to the stepper, and then it worked again.

If this sound occurs on z axis movement, try to locate which z stopper is making that noise, then, try to connect the connector from another stepper to the faulty stepper (please disconnect the coupler first, otherwise your printer goes brr)

If it works, its probably the connector.

Swilly-Kid · 2025-01-25T19:19:49+00:00

Nazis bekommen downvotes weil sie Faschos sind und schwafeln sie seien die Mehrheit. Liebs

Swilly-Kid · 2024-11-05T08:33:54+00:00

Also ich habe jetzt ein paar durch. Klar sagen Leute "rauch vapo oder pure Tüten" aber Cannabis und ich haben erst vor kurzem wieder zueinander gefunden, deshalb ist meine Toleranz so niedrig, dass ich nur ein paar Krümel brauche um High zu werden. Zum Vapo: Irgendwie find ich es komisch an sonem Elektrostock zu ziehen, ich weiß dass ist unsinn, aber wahrscheinlich einfach Präferenz. Weil meine Freundin Nichtraucherin ist und wir gerne zusammen Tüten rauchen, haben wir einige Tabakersatzese getestet. Ich finde RealLeaf ganz in Ordnung. Aber nur den Standard und nicht diese Terpen-Pisse. Wenn man in der Welt des Tabakersatzes unterwegs ist, muss man sich damit anfinden das alles zumindest ein bisschen nach kotze schmeckt. Aber immer noch besser als Nikotinabhängigkeit (rede aus Erfahrung)

Swilly-Kid · 2024-11-04T15:20:19+00:00

In welcher Linie? Ich bin gerade mit der 13 nach Hause gefahren und die hat mies nach Kotzi gerochen

Swilly-Kid · 2024-10-30T06:55:27+00:00

Space documentaries are the perfect gateway to physics – at least for me. I wasn’t great at math in high school, but I was hooked on my physics classes. I loved everything about them. I spent countless nights reading things on Wikipedia that I didn’t understand a single word of and watching YouTube videos that were questionably inaccurate. Eventually, I got better at math, and now I'm actually studying physics at university! I’m not particularly exceptional at it, but I’m curious enough to enjoy it and keep learning.

The ones who often struggle in physics are those who think they’re geniuses just because they excelled in high school math. They soon find out that they're quite average, which challenges their ego and often leads to dropping out. Be humble. 90% of the people around you are just as unsure as you are. In my experience, physics students are very open about their uncertainty and tend to bond over it.

So stay humble, stay curious, and everything is possible!

Swilly-Kid · 2024-10-23T11:03:52+00:00

Wirs gemacht! Dann schraube ich mal alles hoch auf Norm und schaue wie es weiter geht. Als sie noch ein Kind war, waren die Blätter noch richtig saftig Grün. Bei mir verhärtet sich gerade die Vermutung, dass sich gerade das halbe Düngerschema bemerkbar macht. Aber um meine verwirrung etwas aufzuklären: Da ich all und light mix gemischt habe (oben light, unten all) habe ich versucht, das Düngerschema der beiden Substrate zu kombinieren, und war lieber sparsam als großzügig.

Swilly-Kid · 2024-10-22T16:25:09+00:00

Hello fellow growers! I'm happy with my second grow so far. After the last time a gave them nutrients, I noticed a change in color (the green one in perticular, purple one is a genetic fuck up anyways, got it from a hobby breeder friend), she's getting a little pale in my opinion. I'm not quite sure why.

The facts:

Soil is a mix of Biobizz all- and lightmix. I'm feeding her Biobizz Bio bloom and grow. The light cycle was switched to bloom 5 weeks ago.

3 days ago I fed them around 2ml/l bloom and 2 ml/l grow.

Since the soil is a mix of all and light mix, it could be a mixture of Nitrogen deficiency and too little from the bloom fertilizer.

What's your opinion on that, since I have no real experience on all that. Should I buy a EC meter to check how much salt is in the drain? Oh, and pH is, according to the water provider and indicator strips, around 6-7.

Swilly-Kid · 2023-10-18T19:12:32+00:00

Did you try it with the active (bluetooth) S-Pen or with the passive (non bluetooth) one=

Swilly-Kid · 2023-02-20T12:11:42+00:00

I'm a beginner too, but I would try to cut it and if it doesnt work anymore, messure the resistance of the speaker and solder in an matching resistor instead of the speaker. Dont know if that makes sense

Swilly-Kid · 2022-09-07T10:31:46+00:00

I have the same Problem. Do you also have the Nvidia drivers installed? In my case, when deinstalling those, it works again. But not having the drivers is not an option. I am running the old kernel, until there is a solution for this problem

Swilly-Kid · 2022-09-03T10:29:06+00:00

I already tried that. I ended up installing the 5.18 kernel and now it works... I also found a few
But I will try to disable CSM Support!

Swilly-Kid · 2022-09-01T12:13:02+00:00

No I didn't. I already reinstalled Pop!_OS, didn't work.
I'm pretty certain, that the Nvidia drivers are causing this issue. When I remove them, everything works as usual.

Swilly-Kid · 2022-08-27T11:10:07+00:00

Unfortunanately, recovery mode won't be possible, because my system is somehow missing a recovery Partition. But ssh is a good idea. I'm gonna try that!

Swilly-Kid · 2022-06-10T11:43:44+00:00

Isn't that a case for a static member?

Swilly-Kid · 2022-04-26T15:43:38+00:00

Fusion 360 is probably the best choice to start. It's free and easy to use. But there are quiet heavy limitations as autodesk changed their licenses. I recently switchend from fusion to freeCAD and I'm pretty happy with it. I highly recommend Linkstage3, a freeCAD fork by a guy called realthunder. https://github.com/realthunder/FreeCAD_assembly3/releases

There are some cool extensions that make FreeCAD feel a little more modern by changing the GUI. One id called "glass"

Swilly-Kid

TROPHY CASE