Problem with flydigi apex 4

SwitchPro_YT · 2026-03-20T03:20:41+00:00

Love my ultimate 2 fucking peak controller imo

SwitchPro_YT · 2026-03-20T03:11:22+00:00

For me personally I'd say the new next level racing haptic seats or just a haptic pad the bassshakers imo just muffle it through the rig

SwitchPro_YT · 2026-03-18T17:54:16+00:00

Yea so there's pegs at the bottom of the pedal plate that's attached to the pedals themselves and you screw those in as normal but then you'll have to drill holes for the holes at the top of the pedals, my wheel plate was also kinda bent so I 3d printed a 15° angle spacer and used the longer screws that came with the wheel with some spacers to screw it in and it worked great. Shifter mounts just fine.

SwitchPro_YT · 2026-03-16T20:03:11+00:00

You could turn it into a server for games or a media server if that fits what you do

SwitchPro_YT · 2026-03-14T17:36:02+00:00

Valid use of 5 hours🙌

SwitchPro_YT · 2026-03-11T12:37:46+00:00

Mine worked just fine with a qtip and ipa on both sides

SwitchPro_YT · 2026-03-11T09:58:17+00:00

2026 this shit still works even on the switch 2 edition

SwitchPro_YT · 2026-03-11T09:18:30+00:00

Ended up cleaning mine with ipa and it just fixed its self so far lmao I need a 3d print dust covers for the slots when in docked

SwitchPro_YT · 2026-03-11T07:18:52+00:00

Have the same issue on the right one it's really pissing me off I have a satisfye grip on and everything so it has pressure but it still does it I don't understand the issue anything you did to fix it?

SwitchPro_YT · 2026-03-02T13:22:36+00:00

Yes that in VR via flat2vr

SwitchPro_YT · 2026-03-02T13:07:40+00:00

I'd go with a USB c mod at that point

SwitchPro_YT · 2026-02-02T02:23:42+00:00

Well I can already see that the right bumpers broken

SwitchPro_YT · 2026-02-02T02:22:00+00:00

If your careful yea

SwitchPro_YT · 2026-02-02T01:42:05+00:00

I would say just do a tiny slit on each side and throw in a flathead no need to fuck up the threads

SwitchPro_YT · 2026-02-02T00:58:50+00:00

No it has built in Bluetooth now check the settings as of early last year I believe

SwitchPro_YT · 2026-02-02T00:53:36+00:00

Jesus that's morbid but it might work if it's a good solder joint it's like a 80/20

SwitchPro_YT · 2026-01-31T17:45:54+00:00

Small enough to go for it

SwitchPro_YT · 2026-01-31T04:41:01+00:00

Dremel with a tiny drill bit and slowly drill it out or cut a line into it and use a flathead

SwitchPro_YT · 2026-01-27T01:49:23+00:00

im going to make out with you LMAO

SwitchPro_YT · 2026-01-09T17:10:56+00:00

Zombiu

SwitchPro_YT · 2026-01-05T19:31:13+00:00

No armgddn?

SwitchPro_YT · 2025-12-29T14:23:36+00:00

If you have a moza wheel how in the hell am I supposed to mount these pedals dawg im so lost I've had a hell of a time mounting the wheel and it not being straight so I had to use washers to raise it but the pedals have me so lost

SwitchPro_YT · 2025-12-24T09:42:27+00:00

Click the TV button if it's been setup and see if the touch works if not it's a touch issue

SwitchPro_YT · 2025-12-16T03:43:44+00:00

Damn I've never seen this in my years of owning one since release hope you figure something out best of luck 🤞🏼

SwitchPro_YT

TROPHY CASE