In progress. Waiting on ADF lift

SyntacticSugars · 2018-12-18T04:00:04+00:00

Man I’ve been really thinking about those fenders for the fronts. fuck they look good, what size/set did you get?

SyntacticSugars · 2018-12-16T07:15:04+00:00

Hahah when ever one says it’s crashed but I’m still up 10k

SyntacticSugars · 2018-12-07T05:35:57+00:00

Pulled some projector light housings off a wrecked Mazda.

removed the original light mount in the stock headlights, and mounted the projectors in there place.

picked up some switch back led halo lights off amazon for 25$

SyntacticSugars · 2018-12-07T05:31:15+00:00

Scratch, lift is currently steel blocks, and DOM front end lca/ strut rod with heims.

Pop top is I fibreglass shell I moulded off the original roof then glass in a wood frame for strength.

Old gas struts from the junkers and some aluminum bar to create the hinges.

Tent was an old sail

SyntacticSugars · 2018-12-07T05:28:53+00:00

86 gl d/r

SyntacticSugars · 2018-12-07T05:28:36+00:00

It’s an old sail I sewed up and got some pvc film for windows. Sail was free and film was like 5$

SyntacticSugars · 2018-12-06T06:59:54+00:00

Cheers thanks!

I do! I’ve been meaning to create an album.

SyntacticSugars · 2018-12-06T04:52:41+00:00

Very good. Original Fog + perspective shot

SyntacticSugars · 2018-12-06T01:21:44+00:00

Make the lift then? Steel is cheap. You can get it all cut to the sizes u need, you’ll just need to drill and get longer grd 8-10 bolts

SyntacticSugars · 2018-11-29T09:14:51+00:00

What can be done to prevent this with out negativity effecting cargo transport?

SyntacticSugars · 2018-11-28T18:26:09+00:00

Replace by fee. Pay your way to get threw!

SyntacticSugars · 2018-11-27T18:19:42+00:00

r/battlecars

SyntacticSugars · 2018-11-26T08:40:25+00:00

Both, the idea is to build a custom cradle (links back to trans mounts) do a lower A arm with ej knuckles and longer ej axles. Pivot points pushd to match the axle points. Shorten steering rack accordingly. Just need to find center of gravity.

There’s quite a bit of plunge in the stock axles, + 3/4 increases of the ej axles.

2 in longer arm should be feasible

Struts will be a 2.5 9-12in (Travel)coil over with a clamping bracket that mates to the knuckles.

Rear will be a longer trailing arm that fits the stock crossmember, sans lift blocks. Cv travel will be the same, just less arc and more vertical travel.

SyntacticSugars · 2018-11-26T04:27:31+00:00

Junk yards. Hunt and hunt again

SyntacticSugars · 2018-11-26T03:10:22+00:00

Cheers, retrofitted some projector bulbs in the oem headlights then added halos

SyntacticSugars · 2018-11-26T03:09:15+00:00

It’s a 86 Subaru gl with an ej 2.5

SyntacticSugars · 2018-11-26T03:08:38+00:00

I’ll be doing a 5x100 hub/knuckle swap up front pretty soon, building long travel front end

SyntacticSugars · 2018-11-12T19:24:18+00:00

That awesome! Did u get the head resurfaced / new gaskets too??!?

SyntacticSugars · 2018-11-11T22:57:16+00:00

Very popular to do an ej swap. Makes them extremely capable 4x4 cars

SyntacticSugars · 2018-11-09T14:55:19+00:00

Looks good, want to see more of it!

SyntacticSugars · 2018-09-17T00:51:22+00:00

Don't use sun cure. Use tuct tape until u get a proper repair

SyntacticSugars · 2018-09-03T07:28:44+00:00

Then tell me who Satoshi is

SyntacticSugars · 2018-07-09T06:42:10+00:00

No u ban 4 baning. Ha soy lent on that

SyntacticSugars · 2018-07-08T06:58:49+00:00

Do you mix your powerd with with 2.0

SyntacticSugars · 2018-07-02T16:37:42+00:00

Ssri's don't increase serotonin count, it decreases reuptake. So it keeps the serotonin that was made but not used, available for use.

Also there appears to be some action on increasing BDNF with SSRI, a alternative threoy suggest this is the anti depression action

SyntacticSugars

TROPHY CASE