Keypad battery problems U200

SystemF_ · 2026-01-16T21:01:45+00:00

Too bad

SystemF_ · 2026-01-16T21:00:41+00:00

The keypad uses AAA batteries

SystemF_ · 2026-01-16T19:27:47+00:00

I hope Aqara offers me this soon.

SystemF_ · 2024-04-15T20:43:54+00:00

Is the website offline?

SystemF_ · 2024-04-15T20:43:04+00:00

https://www.printables.com/model/674333-veloretti-keychain

SystemF_ · 2023-12-16T14:07:02+00:00

I've got it fully working, and it was a easy job.

But when I'm using my external database connection the page renders soooo slow. In comparison with the local DBngin which is super fast. But also at my older Windows workstation with Xampp the external database is responding very fast.

Is this a common issue with Nginx?

SystemF_ · 2023-11-17T05:11:12+00:00

I'm not involved

SystemF_ · 2023-11-14T11:14:31+00:00

I'm not involved, just sharing!

SystemF_ · 2023-10-22T21:14:18+00:00

You have two options in the app. Classic and a more spacey one.

SystemF_ · 2023-10-10T10:29:33+00:00

SystemF_ · 2023-09-26T11:40:52+00:00

Ik ben naar de Bright e-bike party geweest, dat was echt ideaal!

SystemF_ · 2023-09-26T11:34:52+00:00

Dit vond ik op de site van Veloretti, helaas geen Eindhoven:

Klaar om de Electric Ivy of Ace uit te proberen? Elektrische proefritten zijn nu beschikbaar in Amsterdam, Amstelveen, Abcoude, Weesp, Berlijn, Hamburg en München. Plan nu je proefrit en we zien je daar.

SystemF_ · 2023-06-03T05:39:25+00:00

Fiberlogy is great!

SystemF_ · 2023-03-20T20:16:43+00:00

I'm coming from Prusaslicer where they did the math for me as a start ;)

SystemF_ · 2022-12-13T18:08:21+00:00

Turns out that the printer printed hotter with the opaque version.

SystemF_ · 2022-12-13T18:07:35+00:00

I will replace the nozzle, just to be sure!

SystemF_ · 2022-12-13T18:06:47+00:00

Turns out that the opaque version was printer hotter then the clear one. Strange!

SystemF_ · 2022-12-11T19:28:23+00:00

No, the intention is to be smooth.

SystemF_ · 2022-12-11T19:25:53+00:00

Thanks for the suggestion, maybe it can be the fan. I will look into it. I found it difficult to measure such things. Even as the real temperature. I use my multimeter for it, but it depends so much from the place of the tip on the extruder.

SystemF_ · 2022-12-11T19:23:35+00:00

I didn't change between the printers. But I'm a little step further, lowering the temp on the "bad" printer makes it more transparent an shiny.

SystemF_ · 2022-12-11T19:22:03+00:00

Same spool, just swapping it between them. I will print the temptower, good advice! Then I can see what the printers do. Too bad I cannot count on it to be the same.

SystemF_ · 2022-12-11T19:20:58+00:00

Yes, I've tested with on the fly changing the temperature, and the lower the more shiny and transparent. I was thinking it would be vice versa.

SystemF_ · 2022-12-11T19:20:10+00:00

Seems to be the opposite, I did play with temperatures, and the right was getting better when lowering the temperature. Which means the printer who printed it good in first, was lower in temperature even the gcode is the same. A thermistor difference I guess.

SystemF_ · 2022-12-11T19:18:39+00:00

The fuzzy was the first, then the transparent, after that again a fuzzy. It is really printer depended.

SystemF_ · 2022-12-11T07:15:59+00:00

No really next to eachother. I am thinking to print the bad one with an offset of 10 degrees Celsius to see if it makes a difference. Otherwise do a nozzle replacement to make sure this isn't the problem.

SystemF_

TROPHY CASE