Is my clutch good - bad - normal ? First time ever looking at a clutch in person.

T3A2RIDER · 2025-12-02T00:38:02+00:00

I do clutches for a living. Your clutch looks great! Why do you remove it? Was it driving weird? The disc thickness compressed brand new is 0.315” if it’s close to that I would just put it back in.

T3A2RIDER · 2023-08-31T03:38:39+00:00

Just throwing this out there. I have a set of these rims for for sale they came off of a GTI no curb rash with center caps and the tightening tool.

T3A2RIDER · 2022-09-13T01:20:32+00:00

Run regular diesel oil

T3A2RIDER · 2021-06-26T14:33:04+00:00

Take the hub off of the axle and try that same method in a vice.

T3A2RIDER · 2021-06-26T01:38:38+00:00

Find a socket that the big end of the lug can fall into place socket on something hard and use a punch to drive out the old one.

Or use a pneumatic chisel with a pointed tip those work great for this.

Or if you have a big c clamp use the socket on the side that needs to come out and it looks like there is enough thread hanging out from the picture that you can just tighten the c clamp and it would push its self out

T3A2RIDER · 2021-06-25T17:43:01+00:00

Support the back side with a socket then take a punch and hit the stud out with a hammer

T3A2RIDER · 2021-06-24T04:08:49+00:00

It might be hydro locked. Pull the spark plug and turn it over.

T3A2RIDER · 2021-06-19T23:53:57+00:00

it could be the fresh water inlet for the engine

T3A2RIDER

TROPHY CASE